Mercurial > hg
view tests/test-copy.t @ 39496:2f9f7889549b
snapshot: introduce an intermediate `_refinedgroups` generator
This method will be used to improve the search for a good snapshot base. To
keep things simpler, we introduce the necessary function before doing any
delta base logic change. The next handful of commits will focus on refactoring
the code to let that new logic land as clearly as possible.
# General Idea
Right now, the search for a good delta base stop whenever we found a good one.
However, when using sparse-revlog, we should probably try a bit harder.
We do significant effort to increase delta re-use by jumping on "unrelated"
delta chains that provide better results. Moving to another chain for a better
result is good, but we have no guarantee we jump at a reasonable point in that
new chain. When we consider over the chains related to the parents, we start
from the higher-level snapshots. This is a way to consider the snapshot closer
to the current revision that has the best chance to produce a small delta. We
do benefit from this walk order when jumping to a better "unrelated" stack.
To counter-balance this, we'll introduce a way to "refine" the result. After a
good delta have been found, we'll keep searching for a better delta, using the
current best one as a starting point.
# Target Setup
The `finddeltainfo` method is responsible for the general search for a good
delta. It requests candidates base from `_candidategroups` and decides which
one are usable.
The `_candidategroups` generator act as a top-level filter, it does not care
about how we pick candidates, it just does basic filtering, excluding
revisions that have been tested already or that are an obvious misfit.
The `_rawgroups` generator is the one with the actual ancestors walking logic,
It does not care about what would do a good delta and what was already tested,
it just issues the initial candidates.
We introduce a new `_refinedgroup` function to bridge the gap between
`_candidategroups` and `_rawgroups`. It delegates the initial iteration logic
and then performing relevant refining of the valid base once found. (This
logic is yet to be added to function)
All these logics are fairly independent and easier to understand when standing
alone, not mixed with each other. It also makes it easy to test and try
different approaches for one of those four layers without affecting the other
ones.
# Technical details
To communicate `finddeltainfo` choice of "current best delta base" to the
`_refinegroup` logic, we plan to use python co-routine feature. The
`_candidategroups` and `_refinegroup` generators will become co-routine. This
will allow `_refinegroup` to detect when a good delta have been found and
triggers various refining steps.
For now, `_candidategroups` will just pass the value down the stack.
After poking at various option, the co-routine appears the best to keep each
layers focus on its duty, without the need to spread implementation details
across layers.
author | Boris Feld <boris.feld@octobus.net> |
---|---|
date | Fri, 07 Sep 2018 11:17:32 -0400 |
parents | f1186c292d03 |
children | e41449818bee |
line wrap: on
line source
$ mkdir part1 $ cd part1 $ hg init $ echo a > a $ hg add a $ hg commit -m "1" $ hg status $ hg copy a b $ hg --config ui.portablefilenames=abort copy a con.xml abort: filename contains 'con', which is reserved on Windows: con.xml [255] $ hg status A b $ hg sum parent: 0:c19d34741b0a tip 1 branch: default commit: 1 copied update: (current) phases: 1 draft $ hg --debug commit -m "2" committing files: b b: copy a:b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 committing manifest committing changelog updating the branch cache committed changeset 1:93580a2c28a50a56f63526fb305067e6fbf739c4 we should see two history entries $ hg history -v changeset: 1:93580a2c28a5 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: b description: 2 changeset: 0:c19d34741b0a user: test date: Thu Jan 01 00:00:00 1970 +0000 files: a description: 1 we should see one log entry for a $ hg log a changeset: 0:c19d34741b0a user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 this should show a revision linked to changeset 0 $ hg debugindex a rev linkrev nodeid p1 p2 0 0 b789fdd96dc2 000000000000 000000000000 we should see one log entry for b $ hg log b changeset: 1:93580a2c28a5 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 2 this should show a revision linked to changeset 1 $ hg debugindex b rev linkrev nodeid p1 p2 0 1 37d9b5d994ea 000000000000 000000000000 this should show the rename information in the metadata $ hg debugdata b 0 | head -3 | tail -2 copy: a copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 #if reporevlogstore $ md5sum.py .hg/store/data/b.i 44913824c8f5890ae218f9829535922e .hg/store/data/b.i #endif $ hg cat b > bsum $ md5sum.py bsum 60b725f10c9c85c70d97880dfe8191b3 bsum $ hg cat a > asum $ md5sum.py asum 60b725f10c9c85c70d97880dfe8191b3 asum $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 2 changesets with 2 changes to 2 files $ cd .. $ mkdir part2 $ cd part2 $ hg init $ echo foo > foo should fail - foo is not managed $ hg mv foo bar foo: not copying - file is not managed abort: no files to copy [255] $ hg st -A ? foo $ hg add foo dry-run; print a warning that this is not a real copy; foo is added $ hg mv --dry-run foo bar foo has not been committed yet, so no copy data will be stored for bar. $ hg st -A A foo should print a warning that this is not a real copy; bar is added $ hg mv foo bar foo has not been committed yet, so no copy data will be stored for bar. $ hg st -A A bar should print a warning that this is not a real copy; foo is added $ hg cp bar foo bar has not been committed yet, so no copy data will be stored for foo. $ hg rm -f bar $ rm bar $ hg st -A A foo $ hg commit -m1 moving a missing file $ rm foo $ hg mv foo foo3 foo: deleted in working directory foo3 does not exist! $ hg up -qC . copy --after to a nonexistent target filename $ hg cp -A foo dummy foo: not recording copy - dummy does not exist [1] dry-run; should show that foo is clean $ hg copy --dry-run foo bar $ hg st -A C foo should show copy $ hg copy foo bar $ hg st -C A bar foo shouldn't show copy $ hg commit -m2 $ hg st -C should match $ hg debugindex foo rev linkrev nodeid p1 p2 0 0 2ed2a3912a0b 000000000000 000000000000 $ hg debugrename bar bar renamed from foo:2ed2a3912a0b24502043eae84ee4b279c18b90dd $ echo bleah > foo $ echo quux > bar $ hg commit -m3 should not be renamed $ hg debugrename bar bar not renamed $ hg copy -f foo bar should show copy $ hg st -C M bar foo XXX: filtering lfilesrepo.status() in 3.3-rc causes the copy source to not be displayed. $ hg st -C --config extensions.largefiles= The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !) M bar foo $ hg commit -m3 should show no parents for tip $ hg debugindex bar rev linkrev nodeid p1 p2 0 1 7711d36246cc 000000000000 000000000000 1 2 bdf70a2b8d03 7711d36246cc 000000000000 2 3 b2558327ea8d 000000000000 000000000000 should match $ hg debugindex foo rev linkrev nodeid p1 p2 0 0 2ed2a3912a0b 000000000000 000000000000 1 2 dd12c926cf16 2ed2a3912a0b 000000000000 $ hg debugrename bar bar renamed from foo:dd12c926cf165e3eb4cf87b084955cb617221c17 should show no copies $ hg st -C copy --after on an added file $ cp bar baz $ hg add baz $ hg cp -A bar baz $ hg st -C A baz bar foo was clean: $ hg st -AC foo C foo Trying to copy on top of an existing file fails, $ hg copy -A bar foo foo: not overwriting - file already committed ('hg copy --after --force' to replace the file by recording a copy) [1] same error without the --after, so the user doesn't have to go through two hints: $ hg copy bar foo foo: not overwriting - file already committed ('hg copy --force' to replace the file by recording a copy) [1] but it's considered modified after a copy --after --force $ hg copy -Af bar foo $ hg st -AC foo M foo bar The hint for a file that exists but is not in file history doesn't mention --force: $ touch xyzzy $ hg cp bar xyzzy xyzzy: not overwriting - file exists ('hg copy --after' to record the copy) [1] $ cd ..