view mercurial/mpatch.c @ 15708:309e49491253

push: propagate --new-branch and --ssh options when pushing subrepos

Up until now the all the push command options were ignored when pushing
subrepos. In particular, the fact that the --new-branch command was not passed
down to subrepos made it not possible to push a repo when any of its
subrepos had a new branch, even if you used the --new-branch option of the push
command.

In addition the error message was confusing since it showed the following hint:
"--new-branch hint: use 'hg push --new-branch' to create new remote branches".
However using the --new_branch flag did not fix the problem, as it was ignored
when pushing subrepos.

This patch passes the --new-branch and --ssh flags to every subrepo that is
pushed.

Issues/Limitations:

- All subrepo types get these flags, but only the mercurial subrepos use them.
- It is no longer possible to _not_ pass down these flags to subrepos when
pushing:
   * An alternative would be to introduce a --subrepos flag that should be
used to pass down these flags to the subrepos.
   * If we did this, it could make sense to make the --force flag respect this
   new --subrepos flag as well for consistency's sake.
- Matt suggested that the ssh related flags could also be passed down to
subrepos during pull and clone. However it seems that it would be the "update"
command that would need to get those, since subrepos are only pulled on update.
In any case I'd prefer to leave that for a later patch.

/*
 mpatch.c - efficient binary patching for Mercurial

 This implements a patch algorithm that's O(m + nlog n) where m is the
 size of the output and n is the number of patches.

 Given a list of binary patches, it unpacks each into a hunk list,
 then combines the hunk lists with a treewise recursion to form a
 single hunk list. This hunk list is then applied to the original
 text.

 The text (or binary) fragments are copied directly from their source
 Python objects into a preallocated output string to avoid the
 allocation of intermediate Python objects. Working memory is about 2x
 the total number of hunks.

 Copyright 2005, 2006 Matt Mackall <[e-mail]>

 This software may be used and distributed according to the terms
 of the GNU General Public License, incorporated herein by reference.
*/

#include <Python.h>
#include <stdlib.h>
#include <string.h>

#include "util.h"

/* Definitions to get compatibility with python 2.4 and earlier which
   does not have Py_ssize_t. See also PEP 353.
   Note: msvc (8 or earlier) does not have ssize_t, so we use Py_ssize_t.
*/
#if PY_VERSION_HEX < 0x02050000 && !defined(PY_SSIZE_T_MIN)
typedef int Py_ssize_t;
#define PY_SSIZE_T_MAX INT_MAX
#define PY_SSIZE_T_MIN INT_MIN
#endif

#ifdef _WIN32
#ifdef _MSC_VER
/* msvc 6.0 has problems */
#define inline __inline
typedef unsigned long uint32_t;
#else
#include <stdint.h>
#endif
static uint32_t ntohl(uint32_t x)
{
	return ((x & 0x000000ffUL) << 24) |
		((x & 0x0000ff00UL) <<  8) |
		((x & 0x00ff0000UL) >>  8) |
		((x & 0xff000000UL) >> 24);
}
#else
/* not windows */
#include <sys/types.h>
#if defined __BEOS__ && !defined __HAIKU__
#include <ByteOrder.h>
#else
#include <arpa/inet.h>
#endif
#include <inttypes.h>
#endif

static char mpatch_doc[] = "Efficient binary patching.";
static PyObject *mpatch_Error;

struct frag {
	int start, end, len;
	const char *data;
};

struct flist {
	struct frag *base, *head, *tail;
};

static struct flist *lalloc(int size)
{
	struct flist *a = NULL;

	if (size < 1)
		size = 1;

	a = (struct flist *)malloc(sizeof(struct flist));
	if (a) {
		a->base = (struct frag *)malloc(sizeof(struct frag) * size);
		if (a->base) {
			a->head = a->tail = a->base;
			return a;
		}
		free(a);
		a = NULL;
	}
	if (!PyErr_Occurred())
		PyErr_NoMemory();
	return NULL;
}

static void lfree(struct flist *a)
{
	if (a) {
		free(a->base);
		free(a);
	}
}

static int lsize(struct flist *a)
{
	return a->tail - a->head;
}

/* move hunks in source that are less cut to dest, compensating
   for changes in offset. the last hunk may be split if necessary.
*/
static int gather(struct flist *dest, struct flist *src, int cut, int offset)
{
	struct frag *d = dest->tail, *s = src->head;
	int postend, c, l;

	while (s != src->tail) {
		if (s->start + offset >= cut)
			break; /* we've gone far enough */

		postend = offset + s->start + s->len;
		if (postend <= cut) {
			/* save this hunk */
			offset += s->start + s->len - s->end;
			*d++ = *s++;
		}
		else {
			/* break up this hunk */
			c = cut - offset;
			if (s->end < c)
				c = s->end;
			l = cut - offset - s->start;
			if (s->len < l)
				l = s->len;

			offset += s->start + l - c;

			d->start = s->start;
			d->end = c;
			d->len = l;
			d->data = s->data;
			d++;
			s->start = c;
			s->len = s->len - l;
			s->data = s->data + l;

			break;
		}
	}

	dest->tail = d;
	src->head = s;
	return offset;
}

/* like gather, but with no output list */
static int discard(struct flist *src, int cut, int offset)
{
	struct frag *s = src->head;
	int postend, c, l;

	while (s != src->tail) {
		if (s->start + offset >= cut)
			break;

		postend = offset + s->start + s->len;
		if (postend <= cut) {
			offset += s->start + s->len - s->end;
			s++;
		}
		else {
			c = cut - offset;
			if (s->end < c)
				c = s->end;
			l = cut - offset - s->start;
			if (s->len < l)
				l = s->len;

			offset += s->start + l - c;
			s->start = c;
			s->len = s->len - l;
			s->data = s->data + l;

			break;
		}
	}

	src->head = s;
	return offset;
}

/* combine hunk lists a and b, while adjusting b for offset changes in a/
   this deletes a and b and returns the resultant list. */
static struct flist *combine(struct flist *a, struct flist *b)
{
	struct flist *c = NULL;
	struct frag *bh, *ct;
	int offset = 0, post;

	if (a && b)
		c = lalloc((lsize(a) + lsize(b)) * 2);

	if (c) {

		for (bh = b->head; bh != b->tail; bh++) {
			/* save old hunks */
			offset = gather(c, a, bh->start, offset);

			/* discard replaced hunks */
			post = discard(a, bh->end, offset);

			/* insert new hunk */
			ct = c->tail;
			ct->start = bh->start - offset;
			ct->end = bh->end - post;
			ct->len = bh->len;
			ct->data = bh->data;
			c->tail++;
			offset = post;
		}

		/* hold on to tail from a */
		memcpy(c->tail, a->head, sizeof(struct frag) * lsize(a));
		c->tail += lsize(a);
	}

	lfree(a);
	lfree(b);
	return c;
}

/* decode a binary patch into a hunk list */
static struct flist *decode(const char *bin, int len)
{
	struct flist *l;
	struct frag *lt;
	const char *data = bin + 12, *end = bin + len;
	uint32_t decode[3]; /* for dealing with alignment issues */

	/* assume worst case size, we won't have many of these lists */
	l = lalloc(len / 12);
	if (!l)
		return NULL;

	lt = l->tail;

	while (data <= end) {
		memcpy(decode, bin, 12);
		lt->start = ntohl(decode[0]);
		lt->end = ntohl(decode[1]);
		lt->len = ntohl(decode[2]);
		if (lt->start > lt->end)
			break; /* sanity check */
		bin = data + lt->len;
		if (bin < data)
			break; /* big data + big (bogus) len can wrap around */
		lt->data = data;
		data = bin + 12;
		lt++;
	}

	if (bin != end) {
		if (!PyErr_Occurred())
			PyErr_SetString(mpatch_Error, "patch cannot be decoded");
		lfree(l);
		return NULL;
	}

	l->tail = lt;
	return l;
}

/* calculate the size of resultant text */
static int calcsize(int len, struct flist *l)
{
	int outlen = 0, last = 0;
	struct frag *f = l->head;

	while (f != l->tail) {
		if (f->start < last || f->end > len) {
			if (!PyErr_Occurred())
				PyErr_SetString(mpatch_Error,
				                "invalid patch");
			return -1;
		}
		outlen += f->start - last;
		last = f->end;
		outlen += f->len;
		f++;
	}

	outlen += len - last;
	return outlen;
}

static int apply(char *buf, const char *orig, int len, struct flist *l)
{
	struct frag *f = l->head;
	int last = 0;
	char *p = buf;

	while (f != l->tail) {
		if (f->start < last || f->end > len) {
			if (!PyErr_Occurred())
				PyErr_SetString(mpatch_Error,
				                "invalid patch");
			return 0;
		}
		memcpy(p, orig + last, f->start - last);
		p += f->start - last;
		memcpy(p, f->data, f->len);
		last = f->end;
		p += f->len;
		f++;
	}
	memcpy(p, orig + last, len - last);
	return 1;
}

/* recursively generate a patch of all bins between start and end */
static struct flist *fold(PyObject *bins, int start, int end)
{
	int len;
	Py_ssize_t blen;
	const char *buffer;

	if (start + 1 == end) {
		/* trivial case, output a decoded list */
		PyObject *tmp = PyList_GetItem(bins, start);
		if (!tmp)
			return NULL;
		if (PyObject_AsCharBuffer(tmp, &buffer, &blen))
			return NULL;
		return decode(buffer, blen);
	}

	/* divide and conquer, memory management is elsewhere */
	len = (end - start) / 2;
	return combine(fold(bins, start, start + len),
		       fold(bins, start + len, end));
}

static PyObject *
patches(PyObject *self, PyObject *args)
{
	PyObject *text, *bins, *result;
	struct flist *patch;
	const char *in;
	char *out;
	int len, outlen;
	Py_ssize_t inlen;

	if (!PyArg_ParseTuple(args, "OO:mpatch", &text, &bins))
		return NULL;

	len = PyList_Size(bins);
	if (!len) {
		/* nothing to do */
		Py_INCREF(text);
		return text;
	}

	if (PyObject_AsCharBuffer(text, &in, &inlen))
		return NULL;

	patch = fold(bins, 0, len);
	if (!patch)
		return NULL;

	outlen = calcsize(inlen, patch);
	if (outlen < 0) {
		result = NULL;
		goto cleanup;
	}
	result = PyBytes_FromStringAndSize(NULL, outlen);
	if (!result) {
		result = NULL;
		goto cleanup;
	}
	out = PyBytes_AsString(result);
	if (!apply(out, in, inlen, patch)) {
		Py_DECREF(result);
		result = NULL;
	}
cleanup:
	lfree(patch);
	return result;
}

/* calculate size of a patched file directly */
static PyObject *
patchedsize(PyObject *self, PyObject *args)
{
	long orig, start, end, len, outlen = 0, last = 0;
	int patchlen;
	char *bin, *binend, *data;
	uint32_t decode[3]; /* for dealing with alignment issues */

	if (!PyArg_ParseTuple(args, "ls#", &orig, &bin, &patchlen))
		return NULL;

	binend = bin + patchlen;
	data = bin + 12;

	while (data <= binend) {
		memcpy(decode, bin, 12);
		start = ntohl(decode[0]);
		end = ntohl(decode[1]);
		len = ntohl(decode[2]);
		if (start > end)
			break; /* sanity check */
		bin = data + len;
		if (bin < data)
			break; /* big data + big (bogus) len can wrap around */
		data = bin + 12;
		outlen += start - last;
		last = end;
		outlen += len;
	}

	if (bin != binend) {
		if (!PyErr_Occurred())
			PyErr_SetString(mpatch_Error, "patch cannot be decoded");
		return NULL;
	}

	outlen += orig - last;
	return Py_BuildValue("l", outlen);
}

static PyMethodDef methods[] = {
	{"patches", patches, METH_VARARGS, "apply a series of patches\n"},
	{"patchedsize", patchedsize, METH_VARARGS, "calculed patched size\n"},
	{NULL, NULL}
};

#ifdef IS_PY3K
static struct PyModuleDef mpatch_module = {
	PyModuleDef_HEAD_INIT,
	"mpatch",
	mpatch_doc,
	-1,
	methods
};

PyMODINIT_FUNC PyInit_mpatch(void)
{
	PyObject *m;

	m = PyModule_Create(&mpatch_module);
	if (m == NULL)
		return NULL;

	mpatch_Error = PyErr_NewException("mpatch.mpatchError", NULL, NULL);
	Py_INCREF(mpatch_Error);
	PyModule_AddObject(m, "mpatchError", mpatch_Error);

	return m;
}
#else
PyMODINIT_FUNC
initmpatch(void)
{
	Py_InitModule3("mpatch", methods, mpatch_doc);
	mpatch_Error = PyErr_NewException("mpatch.mpatchError", NULL, NULL);
}
#endif