view tests/test-rebase-scenario-global.t @ 15708:309e49491253

push: propagate --new-branch and --ssh options when pushing subrepos

Up until now the all the push command options were ignored when pushing
subrepos. In particular, the fact that the --new-branch command was not passed
down to subrepos made it not possible to push a repo when any of its
subrepos had a new branch, even if you used the --new-branch option of the push
command.

In addition the error message was confusing since it showed the following hint:
"--new-branch hint: use 'hg push --new-branch' to create new remote branches".
However using the --new_branch flag did not fix the problem, as it was ignored
when pushing subrepos.

This patch passes the --new-branch and --ssh flags to every subrepo that is
pushed.

Issues/Limitations:

- All subrepo types get these flags, but only the mercurial subrepos use them.
- It is no longer possible to _not_ pass down these flags to subrepos when
pushing:
   * An alternative would be to introduce a --subrepos flag that should be
used to pass down these flags to the subrepos.
   * If we did this, it could make sense to make the --force flag respect this
   new --subrepos flag as well for consistency's sake.
- Matt suggested that the ssh related flags could also be passed down to
subrepos during pull and clone. However it seems that it would be the "update"
command that would need to get those, since subrepos are only pulled on update.
In any case I'd prefer to leave that for a later patch.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > graphlog=
  > rebase=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a
  $ hg unbundle $TESTDIR/bundles/rebase.hg
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 7 changes to 7 files (+2 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up tip
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..


Rebasing
D onto H - simple rebase:

  $ hg clone -q -u . a a1
  $ cd a1

  $ hg tglog
  @  7: 'H'
  |
  | o  6: 'G'
  |/|
  o |  5: 'F'
  | |
  | o  4: 'E'
  |/
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  

  $ hg rebase -s 3 -d 7
  saved backup bundle to $TESTTMP/a1/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @    7: 'D'
  |\
  | o  6: 'H'
  | |
  | | o  5: 'G'
  | |/|
  | o |  4: 'F'
  | | |
  | | o  3: 'E'
  | |/
  o |  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


D onto F - intermediate point:

  $ hg clone -q -u . a a2
  $ cd a2

  $ hg rebase -s 3 -d 5
  saved backup bundle to $TESTTMP/a2/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @    7: 'D'
  |\
  | | o  6: 'H'
  | |/
  | | o  5: 'G'
  | |/|
  | o |  4: 'F'
  | | |
  | | o  3: 'E'
  | |/
  o |  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


E onto H - skip of G:

  $ hg clone -q -u . a a3
  $ cd a3

  $ hg rebase -s 4 -d 7
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @  6: 'E'
  |
  o  5: 'H'
  |
  o  4: 'F'
  |
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


F onto E - rebase of a branching point (skip G):

  $ hg clone -q -u . a a4
  $ cd a4

  $ hg rebase -s 5 -d 4
  saved backup bundle to $TESTTMP/a4/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @  6: 'H'
  |
  o  5: 'F'
  |
  o  4: 'E'
  |
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


G onto H - merged revision having a parent in ancestors of target:

  $ hg clone -q -u . a a5
  $ cd a5

  $ hg rebase -s 6 -d 7
  saved backup bundle to $TESTTMP/a5/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @    7: 'G'
  |\
  | o  6: 'H'
  | |
  | o  5: 'F'
  | |
  o |  4: 'E'
  |/
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


F onto B - G maintains E as parent:

  $ hg clone -q -u . a a6
  $ cd a6

  $ hg rebase -s 5 -d 1
  saved backup bundle to $TESTTMP/a6/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @  7: 'H'
  |
  | o  6: 'G'
  |/|
  o |  5: 'F'
  | |
  | o  4: 'E'
  | |
  | | o  3: 'D'
  | | |
  +---o  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


These will fail (using --source):

G onto F - rebase onto an ancestor:

  $ hg clone -q -u . a a7
  $ cd a7

  $ hg rebase -s 6 -d 5
  nothing to rebase
  [1]

F onto G - rebase onto a descendant:

  $ hg rebase -s 5 -d 6
  abort: source is ancestor of destination
  [255]

G onto B - merge revision with both parents not in ancestors of target:

  $ hg rebase -s 6 -d 1
  abort: cannot use revision 6 as base, result would have 3 parents
  [255]


These will abort gracefully (using --base):

G onto G - rebase onto same changeset:

  $ hg rebase -b 6 -d 6
  nothing to rebase
  [1]

G onto F - rebase onto an ancestor:

  $ hg rebase -b 6 -d 5
  nothing to rebase
  [1]

F onto G - rebase onto a descendant:

  $ hg rebase -b 5 -d 6
  nothing to rebase
  [1]

C onto A - rebase onto an ancestor:

  $ hg rebase -d 0 -s 2
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/5fddd98957c8-backup.hg (glob)
  $ hg tglog
  @  7: 'D'
  |
  o  6: 'C'
  |
  | o  5: 'H'
  | |
  | | o  4: 'G'
  | |/|
  | o |  3: 'F'
  |/ /
  | o  2: 'E'
  |/
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..

Test for revset

We need a bit different graph
All destination are B

  $ hg init ah
  $ cd ah
  $ hg unbundle $TESTDIR/bundles/rebase-revset.hg
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 9 changes to 9 files (+2 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg tglog
  o  8: 'I'
  |
  o  7: 'H'
  |
  o  6: 'G'
  |
  | o  5: 'F'
  | |
  | o  4: 'E'
  |/
  o  3: 'D'
  |
  o  2: 'C'
  |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Simple case with keep:

Source on have two descendant heads but ask for one

  $ hg clone -q -u . ah ah1
  $ cd ah1
  $ hg rebase -r '2::8' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '2::8' -d 1 --keep
  $ hg tglog
  @  13: 'I'
  |
  o  12: 'H'
  |
  o  11: 'G'
  |
  o  10: 'D'
  |
  o  9: 'C'
  |
  | o  8: 'I'
  | |
  | o  7: 'H'
  | |
  | o  6: 'G'
  | |
  | | o  5: 'F'
  | | |
  | | o  4: 'E'
  | |/
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  

  $ cd ..

Base on have one descendant heads we ask for but common ancestor have two

  $ hg clone -q -u . ah ah2
  $ cd ah2
  $ hg rebase -r '3::8' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '3::8' -d 1 --keep
  $ hg tglog
  @  12: 'I'
  |
  o  11: 'H'
  |
  o  10: 'G'
  |
  o    9: 'D'
  |\
  | | o  8: 'I'
  | | |
  | | o  7: 'H'
  | | |
  | | o  6: 'G'
  | | |
  | | | o  5: 'F'
  | | | |
  | | | o  4: 'E'
  | | |/
  | | o  3: 'D'
  | |/
  | o  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  

  $ cd ..

rebase subset

  $ hg clone -q -u . ah ah3
  $ cd ah3
  $ hg rebase -r '3::7' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '3::7' -d 1 --keep
  $ hg tglog
  @  11: 'H'
  |
  o  10: 'G'
  |
  o    9: 'D'
  |\
  | | o  8: 'I'
  | | |
  | | o  7: 'H'
  | | |
  | | o  6: 'G'
  | | |
  | | | o  5: 'F'
  | | | |
  | | | o  4: 'E'
  | | |/
  | | o  3: 'D'
  | |/
  | o  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  

  $ cd ..

rebase subset with multiple head

  $ hg clone -q -u . ah ah4
  $ cd ah4
  $ hg rebase -r '3::(7+5)' -d 1
  abort: can't remove original changesets with unrebased descendants
  (use --keep to keep original changesets)
  [255]
  $ hg rebase -r '3::(7+5)' -d 1 --keep
  $ hg tglog
  @  13: 'H'
  |
  o  12: 'G'
  |
  | o  11: 'F'
  | |
  | o  10: 'E'
  |/
  o    9: 'D'
  |\
  | | o  8: 'I'
  | | |
  | | o  7: 'H'
  | | |
  | | o  6: 'G'
  | | |
  | | | o  5: 'F'
  | | | |
  | | | o  4: 'E'
  | | |/
  | | o  3: 'D'
  | |/
  | o  2: 'C'
  | |
  o |  1: 'B'
  |/
  o  0: 'A'
  

  $ cd ..

More advanced tests

rebase on ancestor with revset

  $ hg clone -q -u . ah ah5
  $ cd ah5
  $ hg rebase -r '6::' -d 2
  saved backup bundle to $TESTTMP/ah5/.hg/strip-backup/3d8a618087a7-backup.hg (glob)
  $ hg tglog
  @  8: 'I'
  |
  o  7: 'H'
  |
  o  6: 'G'
  |
  | o  5: 'F'
  | |
  | o  4: 'E'
  | |
  | o  3: 'D'
  |/
  o  2: 'C'
  |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


rebase with multiple root.
We rebase E and G on B
We would expect heads are I, F if it was supported

  $ hg clone -q -u . ah ah6
  $ cd ah6
  $ hg rebase -r '(4+6)::' -d 1
  abort: can't rebase multiple roots
  [255]
  $ cd ..