view tests/test-narrow-share.t @ 49280:311fcc5a65f6

thirdparty: remove Python 2-specific selectors2 copy

The selectors module was added in Python 3.4. Because we require Python 3.6, it
will always be available. Therefore the selectors2 module is not imported.

I’ve verified that the selectors2-specific workaround in commandserver.py is not
necessary with the selectors module from the standard library. It returns an
empty list if timeout was exceeded.

The pytype directive was needed to silence the following error:

File "/tmp/mercurial-ci/mercurial/worker.py", line 299, in _posixworker: No attribute 'close' on int [attribute-error]
  In Union[_typeshed.HasFileno, int]
File "/tmp/mercurial-ci/mercurial/worker.py", line 299, in _posixworker: No attribute 'close' on _typeshed.HasFileno [attribute-error]
  In Union[_typeshed.HasFileno, int]

#testcases flat tree
#testcases safe normal

#if safe
  $ echo "[format]"         >> $HGRCPATH
  $ echo "exp-share-safe = True" >> $HGRCPATH
#endif

  $ . "$TESTDIR/narrow-library.sh"

#if tree
  $ cat << EOF >> $HGRCPATH
  > [experimental]
  > treemanifest = 1
  > EOF
#endif

  $ cat << EOF >> $HGRCPATH
  > [extensions]
  > share =
  > EOF

  $ hg init remote
  $ cd remote
  $ for x in `$TESTDIR/seq.py 0 10`
  > do
  >   mkdir d$x
  >   echo $x > d$x/f
  >   hg add d$x/f
  >   hg commit -m "add d$x/f"
  > done
  $ cd ..

  $ hg clone --narrow ssh://user@dummy/remote main -q \
  > --include d1 --include d3 --include d5 --include d7

Ignore file called "ignored"
  $ echo ignored > main/.hgignore

  $ hg share main share
  updating working directory
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R share tracked
  I path:d1
  I path:d3
  I path:d5
  I path:d7
  $ hg -R share files
  share/d1/f
  share/d3/f
  share/d5/f
  share/d7/f

Narrow the share and check that the main repo's working copy gets updated

# Make sure the files that are supposed to be known-clean get their timestamps set in the dirstate
  $ sleep 2
  $ hg -R main st
  $ hg -R main debugdirstate --no-dates
  n 644          2 set                 d1/f
  n 644          2 set                 d3/f
  n 644          2 set                 d5/f
  n 644          2 set                 d7/f
# Make d3/f dirty
  $ echo x >> main/d3/f
  $ echo y >> main/d3/g
  $ touch main/d3/ignored
  $ touch main/d3/untracked
  $ hg add main/d3/g
  $ hg -R main st
  M d3/f
  A d3/g
  ? d3/untracked
# Make d5/f not match the dirstate timestamp even though it's clean
  $ sleep 2
  $ hg -R main st
  M d3/f
  A d3/g
  ? d3/untracked
  $ hg -R main debugdirstate --no-dates
  n 644          2 set                 d1/f
  n 644          2 set                 d3/f
  a   0         -1 unset               d3/g
  n 644          2 set                 d5/f
  n 644          2 set                 d7/f
  $ touch main/d5/f
  $ hg -R share tracked --removeinclude d1 --removeinclude d3 --removeinclude d5
  comparing with ssh://user@dummy/remote
  searching for changes
  looking for local changes to affected paths
  deleting data/d1/f.i
  deleting data/d3/f.i
  deleting data/d5/f.i
  deleting meta/d1/00manifest.i (tree !)
  deleting meta/d3/00manifest.i (tree !)
  deleting meta/d5/00manifest.i (tree !)
  deleting unwanted files from working copy
  $ hg -R main tracked
  I path:d7
  $ hg -R main files
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [20]
  $ hg -R main tracked --update-working-copy
  not deleting possibly dirty file d3/f
  not deleting possibly dirty file d3/g
  not deleting possibly dirty file d5/f
  not deleting unknown file d3/untracked
  not deleting ignored file d3/ignored
# d1/f, d3/f, d3/g and d5/f should no longer be reported
  $ hg -R main files
  main/d7/f
# d1/f should no longer be there, d3/f should be since it was dirty, d3/g should be there since
# it was added, and d5/f should be since we couldn't be sure it was clean
  $ find main/d* -type f | sort
  main/d3/f
  main/d3/g
  main/d3/ignored
  main/d3/untracked
  main/d5/f
  main/d7/f

Widen the share and check that the main repo's working copy gets updated

  $ hg -R share tracked --addinclude d1 --addinclude d3 -q
  $ hg -R share tracked
  I path:d1
  I path:d3
  I path:d7
  $ hg -R share files
  share/d1/f
  share/d3/f
  share/d7/f
  $ hg -R main tracked
  I path:d1
  I path:d3
  I path:d7
  $ hg -R main files
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [20]
  $ hg -R main tracked --update-working-copy
# d1/f, d3/f should be back
  $ hg -R main files
  main/d1/f
  main/d3/f
  main/d7/f
# d3/f should be modified (not clobbered by the widening), and d3/g should be untracked
  $ hg -R main st --all
  M d3/f
  ? d3/g
  ? d3/untracked
  I d3/ignored
  C d1/f
  C d7/f

We should also be able to unshare without breaking everything:

  $ hg share main share-unshare
  updating working directory
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd share-unshare
  $ hg unshare
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 11 changesets with 3 changes to 3 files
  $ cd ..

Dirstate should be left alone when upgrading from version of hg that didn't support narrow+share

  $ hg share main share-upgrade
  updating working directory
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd share-upgrade
  $ echo x >> d1/f
  $ echo y >> d3/g
  $ hg add d3/g
  $ hg rm d7/f
  $ hg st
  M d1/f
  A d3/g
  R d7/f
Make it look like a repo from before narrow+share was supported
  $ rm .hg/narrowspec.dirstate
  $ hg ci -Am test
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [20]
  $ hg tracked --update-working-copy
  $ hg st
  M d1/f
  A d3/g
  R d7/f
  $ cd ..