view tests/test-conflict.t @ 52289:323e3626929a

sslutil: add support for clients to set TLSv1.3 as the minimum protocol

AFAICT, all of the TLS versions are supported by the server without doing any
explicit work, and there's only a `devel` config to specify an exact version on
the server side.  Clients would also use TLSv1.3 if available, but this prevents
the server from negotiating down.  This also causes "tls1.3" to be listed in
`hg debuginstall`, even though it was previously supported (if the Python
intepreter supported it- IDK if there's a good way to proactively test for and
show future protocols without requiring manual updates like this).

The v1.3 tests are nested inside the v1.2 tests for simplicity.  The v1.2 blocks
already assume v1.0 and v1.1 support, so this seems reasonable for now.  If/when
the older protocols start getting dropped, this will have to be reworked anyway.

  $ hg init repo
  $ cd repo
  $ cat << EOF > a
  > Small Mathematical Series.
  > One
  > Two
  > Three
  > Four
  > Five
  > Hop we are done.
  > EOF
  $ hg add a
  $ hg commit -m ancestor
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 5
  > Hop we are done.
  > EOF
  $ hg commit -m branch1
  $ hg co 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 6
  > 8
  > Hop we are done.
  > EOF
  $ hg commit -m branch2
  created new head

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ hg id
  618808747361+c0c68e4fe667+ tip

  $ echo "[commands]" >> $HGRCPATH
  $ echo "status.verbose=true" >> $HGRCPATH
  $ hg status
  M a
  ? a.orig
  # The repository is in an unfinished *merge* state.
  
  # Unresolved merge conflicts:
  # 
  #     a
  # 
  # To mark files as resolved:  hg resolve --mark FILE
  
  # To continue:    hg commit
  # To abort:       hg merge --abort
  
  $ hg status -Tjson
  [
   {
    "itemtype": "file",
    "path": "a",
    "status": "M",
    "unresolved": true
   },
   {
    "itemtype": "file",
    "path": "a.orig",
    "status": "?"
   },
   {
    "itemtype": "morestatus",
    "unfinished": "merge",
    "unfinishedmsg": "To continue:    hg commit\nTo abort:       hg merge --abort"
   }
  ]

  $ hg status -0
  M a\x00? a.orig\x00 (no-eol) (esc)
  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 618808747361 - test: branch2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    c0c68e4fe667 - test: branch1
  Hop we are done.

  $ hg status --config commands.status.verbose=0
  M a
  ? a.orig

Verify custom conflict markers

  $ hg up -q --clean .
  $ cat <<EOF >> .hg/hgrc
  > [command-templates]
  > mergemarker = '{author} {rev}'
  > EOF

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify custom conflict markers with legacy config name

  $ hg up -q --clean .
  $ cat <<EOF >> .hg/hgrc
  > [ui]
  > mergemarkertemplate = '{author} {rev}'
  > EOF

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line splitting of custom conflict marker which causes multiple lines

  $ hg up -q --clean .
  $ cat >> .hg/hgrc <<EOF
  > [command-templates]
  > mergemarker={author} {rev}\nfoo\nbar\nbaz
  > EOF

  $ hg -q merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line trimming of custom conflict marker using multi-byte characters

  $ hg up -q --clean .
  $ "$PYTHON" <<EOF
  > fp = open('logfile', 'wb')
  > fp.write(b'12345678901234567890123456789012345678901234567890' +
  >          b'1234567890') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ hg add logfile
  $ hg --encoding utf-8 commit --logfile logfile

  $ cat >> .hg/hgrc <<EOF
  > [command-templates]
  > mergemarker={desc|firstline}
  > EOF

  $ hg -q --encoding utf-8 merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    branch1
  Hop we are done.

Verify basic conflict markers

  $ hg up -q --clean 2
  $ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy
  6
  8
  =======
  4
  5
  >>>>>>> merge rev
  Hop we are done.

internal:merge3

  $ hg up -q --clean .

  $ hg merge 1 --tool internal:merge3
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat a
  Small Mathematical Series.
  <<<<<<< working copy
  1
  2
  3
  6
  8
  ||||||| common ancestor
  One
  Two
  Three
  Four
  Five
  =======
  1
  2
  3
  4
  5
  >>>>>>> merge rev
  Hop we are done.

internal:mergediff

  $ hg co -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 4.5
  > 5
  > Hop we are done.
  > EOF
  $ hg co -m 2 -t internal:mergediff
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  [1]
  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<<
  ------- working copy parent
  +++++++ working copy
   4
  +4.5
   5
  ======= destination
  6
  8
  >>>>>>>
  Hop we are done.
Test the same thing as above but modify a bit more so we instead get the working
copy in full and the diff from base to destination.
  $ hg co -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3.5
  > 4.5
  > 5.5
  > Hop we are done.
  > EOF
  $ hg co -m 2 -t internal:mergediff
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  [1]
  $ cat a
  Small Mathematical Series.
  1
  2
  <<<<<<<
  ======= working copy
  3.5
  4.5
  5.5
  ------- working copy parent
  +++++++ destination
   3
  -4
  -5
  +6
  +8
  >>>>>>>
  Hop we are done.

Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other

  $ hg up -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
  1 other heads for branch "default"
  $ printf "\n\nEnd of file\n" >> a
  $ hg ci -m "Add some stuff at the end"
  $ hg up -r 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ printf "Start of file\n\n\n" > tmp
  $ cat a >> tmp
  $ mv tmp a
  $ hg ci -m "Add some stuff at the beginning"

Now test :merge-other and :merge-local

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg resolve --tool :merge-other a
  merging a
  (no more unresolved files)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  6
  8
  Hop we are done.
  
  
  End of file

  $ hg up -C
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  updated to "18b51d585961: Add some stuff at the beginning"
  1 other heads for branch "default"
  $ hg merge --tool :merge-local
  merging a
  1 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  4
  5
  Hop we are done.
  
  
  End of file