view tests/test-convert-svn-encoding.t @ 52289:323e3626929a

sslutil: add support for clients to set TLSv1.3 as the minimum protocol

AFAICT, all of the TLS versions are supported by the server without doing any
explicit work, and there's only a `devel` config to specify an exact version on
the server side.  Clients would also use TLSv1.3 if available, but this prevents
the server from negotiating down.  This also causes "tls1.3" to be listed in
`hg debuginstall`, even though it was previously supported (if the Python
intepreter supported it- IDK if there's a good way to proactively test for and
show future protocols without requiring manual updates like this).

The v1.3 tests are nested inside the v1.2 tests for simplicity.  The v1.2 blocks
already assume v1.0 and v1.1 support, so this seems reasonable for now.  If/when
the older protocols start getting dropped, this will have to be reworked anyway.

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/encoding.svndump"

Convert while testing all possible outputs

  $ hg --debug convert svn-repo A-hg --config progress.debug=1
  initializing destination A-hg repository
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  run hg sink pre-conversion action
  scanning source...
  found trunk at 'trunk'
  found tags at 'tags'
  found branches at 'branches'
  found branch branch\xc3\xa9 at 5 (esc)
  found branch branch\xc3\xa9e at 6 (esc)
  scanning: 1/4 revisions (25.00%)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  fetching revision log for "/trunk" from 4 to 0
  parsing revision 4 (2 changes)
  parsing revision 3 (4 changes)
  parsing revision 2 (3 changes)
  parsing revision 1 (3 changes)
  no copyfrom path, don't know what to do.
  '/branches' is not under '/trunk', ignoring
  '/tags' is not under '/trunk', ignoring
  scanning: 2/4 revisions (50.00%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
  fetching revision log for "/branches/branch\xc3\xa9" from 5 to 0 (esc)
  parsing revision 5 (1 changes)
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
  found parent of branch /branches/branch\xc3\xa9 at 4: /trunk (esc)
  scanning: 3/4 revisions (75.00%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  fetching revision log for "/branches/branch\xc3\xa9e" from 6 to 0 (esc)
  parsing revision 6 (1 changes)
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  found parent of branch /branches/branch\xc3\xa9e at 5: /branches/branch\xc3\xa9 (esc)
  scanning: 4/4 revisions (100.00%)
  scanning: 5/4 revisions (125.00%)
  scanning: 6/4 revisions (150.00%)
  sorting...
  converting...
  5 init projA
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@1
  converting: 0/6 revisions (0.00%)
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  4 hello
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@2
  converting: 1/6 revisions (16.67%)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xa0 0/3 paths (0.00%) (esc)
  scanning paths: /trunk/\xc3\xa0/e\xcc\x81 1/3 paths (33.33%) (esc)
  scanning paths: /trunk/\xc3\xa9 2/3 paths (66.67%) (esc)
  committing files:
  \xc3\xa0/e\xcc\x81 (esc)
  getting files: \xc3\xa0/e\xcc\x81 1/2 files (50.00%) (esc)
  \xc3\xa9 (esc)
  getting files: \xc3\xa9 2/2 files (100.00%) (esc)
  committing manifest
  committing changelog
  updating the branch cache
  3 copy files
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@3
  converting: 2/6 revisions (33.33%)
  scanning paths: /trunk/\xc3\xa0 0/4 paths (0.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xa8 1/4 paths (25.00%) (esc)
  copied to \xc3\xa8 from \xc3\xa9@2 (esc)
  scanning paths: /trunk/\xc3\xa9 2/4 paths (50.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xb9 3/4 paths (75.00%) (esc)
  mark /trunk/\xc3\xb9 came from \xc3\xa0:2 (esc)
  getting files: \xc3\xa0/e\xcc\x81 1/4 files (25.00%) (esc)
  getting files: \xc3\xa9 2/4 files (50.00%) (esc)
  committing files:
  \xc3\xa8 (esc)
  getting files: \xc3\xa8 3/4 files (75.00%) (esc)
   \xc3\xa8: copy \xc3\xa9:6b67ccefd5ce6de77e7ead4f5292843a0255329f (esc)
  \xc3\xb9/e\xcc\x81 (esc)
  getting files: \xc3\xb9/e\xcc\x81 4/4 files (100.00%) (esc)
   \xc3\xb9/e\xcc\x81: copy \xc3\xa0/e\xcc\x81:a9092a3d84a37b9993b5c73576f6de29b7ea50f6 (esc)
  committing manifest
  committing changelog
  updating the branch cache
  2 remove files
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@4
  converting: 3/6 revisions (50.00%)
  scanning paths: /trunk/\xc3\xa8 0/2 paths (0.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xb9 1/2 paths (50.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  getting files: \xc3\xa8 1/2 files (50.00%) (esc)
  getting files: \xc3\xb9/e\xcc\x81 2/2 files (100.00%) (esc)
  committing files:
  committing manifest
  committing changelog
  updating the branch cache
  1 branch to branch?
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?@5
  converting: 4/6 revisions (66.67%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
  scanning paths: /branches/branch\xc3\xa9 0/1 paths (0.00%) (esc)
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  0 branch to branch?e
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?e@6
  converting: 5/6 revisions (83.33%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  scanning paths: /branches/branch\xc3\xa9e 0/1 paths (0.00%) (esc)
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  updating tags
  committing files:
  .hgtags
  committing manifest
  committing changelog
  updating the branch cache
  run hg sink post-conversion action
  $ cd A-hg
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check tags are in UTF-8

  $ cat .hgtags
  e94e4422020e715add80525e8f0f46c9968689f1 branch\xc3\xa9e (esc)
  f7e66f98380ed1e53a797c5c7a7a2616a7ab377d branch\xc3\xa9 (esc)

  $ cd ..

Subversion sources don't support non-ASCII characters in HTTP(S) URLs.

  $ XFF=$("$PYTHON" -c 'from mercurial.utils.procutil import stdout; stdout.write(b"\xff")')
  $ hg convert --source-type=svn http://localhost:$HGPORT/$XFF test
  initializing destination test repository
  Subversion sources don't support non-ASCII characters in HTTP(S) URLs. Please percent-encode them.
  http://localhost:$HGPORT/\xff does not look like a Subversion repository (esc)
  abort: http://localhost:$HGPORT/\xff: missing or unsupported repository (esc)
  [255]

In Subversion, paths are Unicode (encoded as UTF-8). Therefore paths that can't
be converted between UTF-8 and the locale encoding (which is always ASCII in
tests) don't work.

  $ cp -R svn-repo $XFF
  $ hg convert $XFF test
  initializing destination test repository
  Subversion requires that paths can be converted to Unicode using the current locale encoding (ascii)
  \xff does not look like a CVS checkout (glob) (esc)
  $TESTTMP/\xff does not look like a Git repository (esc)
  \xff does not look like a Subversion repository (glob) (esc)
  \xff is not a local Mercurial repository (glob) (esc)
  \xff does not look like a darcs repository (glob) (esc)
  \xff does not look like a monotone repository (glob) (esc)
  \xff does not look like a GNU Arch repository (glob) (esc)
  \xff does not look like a Bazaar repository (glob) (esc)
  cannot find required "p4" tool
  abort: \xff: missing or unsupported repository (glob) (esc)
  [255]
  $ hg convert file://$TESTTMP/$XFF test
  initializing destination test repository
  Subversion requires that file URLs can be converted to Unicode using the current locale encoding (ascii)
  file:/*/$TESTTMP/\xff does not look like a CVS checkout (glob) (esc)
  $TESTTMP/file:$TESTTMP/\xff does not look like a Git repository (esc)
  file:/*/$TESTTMP/\xff does not look like a Subversion repository (glob) (esc)
  file:/*/$TESTTMP/\xff is not a local Mercurial repository (glob) (esc)
  file:/*/$TESTTMP/\xff does not look like a darcs repository (glob) (esc)
  file:/*/$TESTTMP/\xff does not look like a monotone repository (glob) (esc)
  file:/*/$TESTTMP/\xff does not look like a GNU Arch repository (glob) (esc)
  file:/*/$TESTTMP/\xff does not look like a Bazaar repository (glob) (esc)
  file:/*/$TESTTMP/\xff does not look like a P4 repository (glob) (esc)
  abort: file:/*/$TESTTMP/\xff: missing or unsupported repository (glob) (esc)
  [255]

Subversion decodes percent-encoded bytes on the converted, UTF-8-encoded
string. Therefore, if the percent-encoded bytes aren't valid UTF-8, Subversion
would choke on them when converting them to the locale encoding.

  $ hg convert file://$TESTTMP/%FF test
  initializing destination test repository
  Subversion does not support non-UTF-8 percent-encoded bytes in file URLs
  file:/*/$TESTTMP/%FF does not look like a CVS checkout (glob)
  $TESTTMP/file:$TESTTMP/%FF does not look like a Git repository
  file:/*/$TESTTMP/%FF does not look like a Subversion repository (glob)
  file:/*/$TESTTMP/%FF is not a local Mercurial repository (glob)
  file:/*/$TESTTMP/%FF does not look like a darcs repository (glob)
  file:/*/$TESTTMP/%FF does not look like a monotone repository (glob)
  file:/*/$TESTTMP/%FF does not look like a GNU Arch repository (glob)
  file:/*/$TESTTMP/%FF does not look like a Bazaar repository (glob)
  file:/*/$TESTTMP/%FF does not look like a P4 repository (glob)
  abort: file:/*/$TESTTMP/%FF: missing or unsupported repository (glob)
  [255]