view tests/test-merge-exec.t @ 52289:323e3626929a

sslutil: add support for clients to set TLSv1.3 as the minimum protocol

AFAICT, all of the TLS versions are supported by the server without doing any
explicit work, and there's only a `devel` config to specify an exact version on
the server side.  Clients would also use TLSv1.3 if available, but this prevents
the server from negotiating down.  This also causes "tls1.3" to be listed in
`hg debuginstall`, even though it was previously supported (if the Python
intepreter supported it- IDK if there's a good way to proactively test for and
show future protocols without requiring manual updates like this).

The v1.3 tests are nested inside the v1.2 tests for simplicity.  The v1.2 blocks
already assume v1.0 and v1.1 support, so this seems reasonable for now.  If/when
the older protocols start getting dropped, this will have to be reworked anyway.

===============================================
Testing merge involving change to the exec flag
===============================================

#require execbit

Initial setup
==============


  $ hg init base-repo
  $ cd base-repo
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ touch b
  $ hg add a b
  $ hg commit -m "initial commit"
  $ cd ..

  $ hg init base-exec
  $ cd base-exec
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ chmod +x a
  $ touch b
  $ hg add a b
  $ hg commit -m "initial commit"
  $ cd ..

Testing merging mode change
===========================

Adding the flag
---------------

setup

Change on one side, executable bit on the other

  $ hg clone base-repo simple-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd simple-merge-repo
  $ chmod +x a
  $ hg ci -m "make a executable, no change"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg commit -m "edit end of file"
  created new head

merge them (from the update side)

  $ hg merge 'desc("make a executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 'desc("edit end of file")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] || echo "executable bit lost"


  $ cd ..


Removing the flag
-----------------

Change on one side, executable bit on the other

  $ hg clone base-exec simple-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd simple-merge-repo-removal
  $ chmod -x a
  $ hg ci -m "make a non-executable, no change"
  $ [ -x a ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg commit -m "edit end of file"
  created new head

merge them (from the update side)

  $ hg merge 'desc("make a non-executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 'desc("edit end of file")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] && echo "executable bit not removed"
  [1]


  $ cd ..

Testing merging mode change with rename
=======================================

Adding the flag
---------------

  $ hg clone base-repo rename-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename-merge-repo

make "a" executable on one side

  $ chmod +x a
  $ hg status
  M a
  $ hg ci -m "make a executable"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ hg ci -m "rename a to z"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a executable")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] || echo "executable bit lost"


  $ cd ..

Removing the flag
-----------------

  $ hg clone base-exec rename-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename-merge-repo-removal

make "a" non-executable on one side

  $ chmod -x a
  $ hg status
  M a
  $ hg ci -m "make a non-executable"
  $ [ -x a ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ hg ci -m "rename a to z"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a non-executable")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] && echo "executable bit not removed"
  [1]


  $ cd ..


Testing merging mode change with rename + modification on both side
===================================================================


Adding the flag
---------------

  $ hg clone base-repo rename+mod-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename+mod-merge-repo

make "a" executable on one side

  $ chmod +x a
  $ cat << EOF > a
  > 1
  > x
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ hg status
  M a
  $ hg ci -m "make a executable, and change start"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ cat << EOF > z
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg ci -m "rename a to z, and change end"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a executable")'
  merging z and a to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  merging a and z to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] || echo "executable bit lost"

  $ cd ..

Removing the flag
-----------------

  $ hg clone base-exec rename+mod-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename+mod-merge-repo-removal

make "a" non-executable on one side

  $ chmod -x a
  $ cat << EOF > a
  > 1
  > x
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ hg status
  M a
  $ hg ci -m "make a non-executable, and change start"
  $ [ -x z ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ cat << EOF > z
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg ci -m "rename a to z, and change end"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a non-executable")'
  merging z and a to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  merging a and z to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

  $ cd ..