Mercurial > hg
view tests/test-split-legacy-inline-changelog.t @ 52289:323e3626929a
sslutil: add support for clients to set TLSv1.3 as the minimum protocol
AFAICT, all of the TLS versions are supported by the server without doing any
explicit work, and there's only a `devel` config to specify an exact version on
the server side. Clients would also use TLSv1.3 if available, but this prevents
the server from negotiating down. This also causes "tls1.3" to be listed in
`hg debuginstall`, even though it was previously supported (if the Python
intepreter supported it- IDK if there's a good way to proactively test for and
show future protocols without requiring manual updates like this).
The v1.3 tests are nested inside the v1.2 tests for simplicity. The v1.2 blocks
already assume v1.0 and v1.1 support, so this seems reasonable for now. If/when
the older protocols start getting dropped, this will have to be reworked anyway.
| author | Matt Harbison <matt_harbison@yahoo.com> |
|---|---|
| date | Mon, 21 Dec 2020 20:21:46 -0500 |
| parents | 4b347e9429e7 |
| children |
line wrap: on
line source
====================================================== Test operation on repository with an inlined changelog ====================================================== Inlined revlog has been a bag of complexity for a long time and the combination with special transaction logic on the changelog was a long source of bugs poorly covered by the test suites. We stopped doing any usage of inlined-revlog for changelog in a93e52f0b6ff, upgrading legacy inlined version as soon as possible when we see them. However this Mercurial does not produce such inlined-changelog that case is very poorly covered in the test suites. This test file aims at covering these cases. Double checking test data ========================= We should have a repository around $ mkdir sanity-check $ cd sanity-check $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ cd inlined-changelog $ hg root $TESTTMP/sanity-check/inlined-changelog The repository should not be corrupted initially $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 1 changesets with 1 changes to 1 files The changelog of that repository MUST be inlined $ hg debugrevlog -c | grep -E '^flags\b' flags : inline Touching that repository MUST split that inlined changelog $ hg branch foo --quiet $ hg commit -m foo --quiet $ hg debugrevlog -c | grep -E '^flags\b' flags : (none) $ cd ../.. Test doing a simple commit ========================== Simple commit ------------- $ mkdir simple-commit $ cd simple-commit $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ cd inlined-changelog $ hg up --quiet $ hg log -GT '[{rev}] {desc}\n' @ [0] first commit $ echo b > b $ hg add b $ hg commit -m "second changeset" $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 2 changesets with 2 changes to 2 files $ hg log -GT '[{rev}] {desc}\n' @ [1] second changeset | o [0] first commit $ cd ../.. Simple commit with a pretxn hook configured ------------------------------------------- Before 6.7.3 this used to delete the changelog index $ mkdir pretxnclose-commit $ cd pretxnclose-commit $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ cat >> inlined-changelog/.hg/hgrc <<EOF > [hooks] > pretxnclose=hg log -r tip -T "pre-txn tip rev: {rev}\n" > EOF $ cd inlined-changelog $ hg up --quiet $ hg log -GT '[{rev}] {desc}\n' @ [0] first commit $ echo b > b $ hg add b $ hg commit -m "second changeset" pre-txn tip rev: 1 $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 2 changesets with 2 changes to 2 files $ hg log -GT '[{rev}] {desc}\n' @ [1] second changeset | o [0] first commit $ cd ../.. Test pushing to a repository with a repository revlog ===================================================== Simple local push ----------------- $ mkdir simple-local-push $ cd simple-local-push $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [0] first commit $ hg clone --pull inlined-changelog client requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 827f11bfd362 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd client $ echo b > b $ hg add b $ hg commit -m "second changeset" $ hg push pushing to $TESTTMP/*/inlined-changelog (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files $ cd .. $ hg verify -R inlined-changelog checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 2 changesets with 2 changes to 2 files $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [1] second changeset [0] first commit $ cd .. Simple local push with a pretxnchangegroup hook ----------------------------------------------- Before 6.7.3 this used to delete the server changelog $ mkdir pretxnchangegroup-local-push $ cd pretxnchangegroup-local-push $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ cat >> inlined-changelog/.hg/hgrc <<EOF > [hooks] > pretxnchangegroup=hg log -r tip -T "pre-txn tip rev: {rev}\n" > EOF $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [0] first commit $ hg clone --pull inlined-changelog client requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 827f11bfd362 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd client $ echo b > b $ hg add b $ hg commit -m "second changeset" $ hg push pushing to $TESTTMP/*/inlined-changelog (glob) searching for changes adding changesets adding manifests adding file changes pre-txn tip rev: 1 added 1 changesets with 1 changes to 1 files $ cd .. $ hg verify -R inlined-changelog checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 2 changesets with 2 changes to 2 files $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [1] second changeset [0] first commit $ cd .. Simple ssh push ----------------- $ mkdir simple-ssh-push $ cd simple-ssh-push $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [0] first commit $ hg clone ssh://user@dummy/"`pwd`"/inlined-changelog client requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 827f11bfd362 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd client $ echo b > b $ hg add b $ hg commit -m "second changeset" $ hg push pushing to ssh://user@dummy/$TESTTMP/simple-ssh-push/inlined-changelog searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ cd .. $ hg verify -R inlined-changelog checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 2 changesets with 2 changes to 2 files $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [1] second changeset [0] first commit $ cd .. Simple ssh push with a pretxnchangegroup hook ----------------------------------------------- Before 6.7.3 this used to delete the server changelog $ mkdir pretxnchangegroup-ssh-push $ cd pretxnchangegroup-ssh-push $ cat "$TESTDIR/bundles/inlined-changelog.tar" | tar xf - $ cat >> inlined-changelog/.hg/hgrc <<EOF > [hooks] > pretxnchangegroup=hg log -r tip -T "pre-txn tip rev: {rev}\n" > EOF $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [0] first commit $ hg clone ssh://user@dummy/"`pwd`"/inlined-changelog client requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 827f11bfd362 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd client $ echo b > b $ hg add b $ hg commit -m "second changeset" $ hg push pushing to ssh://user@dummy/$TESTTMP/pretxnchangegroup-ssh-push/inlined-changelog searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: pre-txn tip rev: 1 remote: added 1 changesets with 1 changes to 1 files $ cd .. $ hg verify -R inlined-changelog checking changesets checking manifests crosschecking files in changesets and manifests checking files checking dirstate checked 2 changesets with 2 changes to 2 files $ hg log -R inlined-changelog -T '[{rev}] {desc}\n' [1] second changeset [0] first commit $ cd ..