view tests/test-add.t @ 40056:324b4b10351e

revlog: rewrite censoring logic

I was able to corrupt a revlog relatively easily with the existing
censoring code. The underlying problem is that the existing code
doesn't fully take delta chains into account. When copying revisions
that occur after the censored revision, the delta base can refer
to a censored revision. Then at read time, things blow up due to the
revision data not being a compressed delta.

This commit rewrites the revlog censoring code to take a higher-level
approach. We now create a new revlog instance pointing at temp files.
We iterate through each revision in the source revlog and insert
those revisions into the new revlog, replacing the censored revision's
data along the way.

The new implementation isn't as efficient as the old one. This is
because it will fully engage delta computation on insertion. But I
don't think it matters.

The new implementation is a bit hacky because it attempts to reload
the revlog instance with a new revlog index/data file. This is fragile.
But this is needed because the index (which could be backed by C) would
have a cached copy of the old, possibly changed data and that could
lead to problems accessing index or revision data later.

One benefit of the new approach is that we integrate with the
transaction. The old revlog is backed up and if the transaction is
rolled back, the original revlog is restored.

As part of this, we had to teach the transaction about the store
vfs. I'm not super keen about this. But this was the easiest way
to hook things up to the transaction. We /could/ just ignore the
transaction like we were doing before. But any file mutation should
be governed by transaction semantics, including undo during rollback.

Differential Revision: https://phab.mercurial-scm.org/D4869

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg add -n
  adding a
  $ hg st
  ? a
  $ hg add
  adding a
  $ hg st
  A a
  $ hg forget a
  $ hg add
  adding a
  $ hg forget a
  $ hg add --color debug
  [addremove.added ui.status|adding a]
  $ hg st
  A a
  $ mkdir dir
  $ cd dir
  $ hg add ../a
  ../a already tracked!
  $ cd ..

  $ echo b > b
  $ hg add -n b
  $ hg st
  A a
  ? b
  $ hg add b
  $ hg st
  A a
  A b

should fail

  $ hg add b
  b already tracked!
  $ hg st
  A a
  A b

#if no-windows
  $ echo foo > con.xml
  $ hg --config ui.portablefilenames=jump add con.xml
  abort: ui.portablefilenames value is invalid ('jump')
  [255]
  $ hg --config ui.portablefilenames=abort add con.xml
  abort: filename contains 'con', which is reserved on Windows: con.xml
  [255]
  $ hg st
  A a
  A b
  ? con.xml
  $ hg add con.xml
  warning: filename contains 'con', which is reserved on Windows: con.xml
  $ hg st
  A a
  A b
  A con.xml
  $ hg forget con.xml
  $ rm con.xml
#endif

#if eol-in-paths
  $ echo bla > 'hello:world'
  $ hg --config ui.portablefilenames=abort add
  adding hello:world
  abort: filename contains ':', which is reserved on Windows: 'hello:world'
  [255]
  $ hg st
  A a
  A b
  ? hello:world
  $ hg --config ui.portablefilenames=ignore add
  adding hello:world
  $ hg st
  A a
  A b
  A hello:world
#endif

  $ hg ci -m 0 --traceback

  $ hg log -r "heads(. or wdir() & file('**'))"
  changeset:   0:* (glob)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     0
  
should fail

  $ hg add a
  a already tracked!

  $ echo aa > a
  $ hg ci -m 1
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aaa > a
  $ hg ci -m 2
  created new head

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg st
  M a
  ? a.orig

wdir doesn't cause a crash, and can be dynamically selected if dirty

  $ hg log -r "heads(. or wdir() & file('**'))"
  changeset:   2147483647:ffffffffffff
  parent:      2:* (glob)
  parent:      1:* (glob)
  user:        test
  date:        * (glob)
  
should fail

  $ hg add a
  a already tracked!
  $ hg st
  M a
  ? a.orig
  $ hg resolve -m a
  (no more unresolved files)
  $ hg ci -m merge

Issue683: peculiarity with hg revert of an removed then added file

  $ hg forget a
  $ hg add a
  $ hg st
  ? a.orig
  $ hg rm a
  $ hg st
  R a
  ? a.orig
  $ echo a > a
  $ hg add a
  $ hg st
  M a
  ? a.orig

excluded file shouldn't be added even if it is explicitly specified

  $ hg add a.orig -X '*.orig'
  $ hg st
  M a
  ? a.orig

Forgotten file can be added back (as either clean or modified)

  $ hg forget b
  $ hg add b
  $ hg st -A b
  C b
  $ hg forget b
  $ echo modified > b
  $ hg add b
  $ hg st -A b
  M b
  $ hg revert -qC b

  $ hg add c && echo "unexpected addition of missing file"
  c: * (glob)
  [1]
  $ echo c > c
  $ hg add d c && echo "unexpected addition of missing file"
  d: * (glob)
  [1]
  $ hg st
  M a
  A c
  ? a.orig
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

forget and get should have the right order: added but missing dir should be
forgotten before file with same name is added

  $ echo file d > d
  $ hg add d
  $ hg ci -md
  $ hg rm d
  $ mkdir d
  $ echo a > d/a
  $ hg add d/a
  $ rm -r d
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat d
  file d

Test that adding a directory doesn't require case matching (issue4578)
#if icasefs
  $ mkdir -p CapsDir1/CapsDir
  $ echo abc > CapsDir1/CapsDir/AbC.txt
  $ mkdir CapsDir1/CapsDir/SubDir
  $ echo def > CapsDir1/CapsDir/SubDir/Def.txt

  $ hg add capsdir1/capsdir
  adding CapsDir1/CapsDir/AbC.txt
  adding CapsDir1/CapsDir/SubDir/Def.txt

  $ hg forget capsdir1/capsdir/abc.txt

  $ hg forget capsdir1/capsdir
  removing CapsDir1/CapsDir/SubDir/Def.txt

  $ hg add capsdir1
  adding CapsDir1/CapsDir/AbC.txt
  adding CapsDir1/CapsDir/SubDir/Def.txt

  $ hg ci -m "AbCDef" capsdir1/capsdir

  $ hg status -A capsdir1/capsdir
  C CapsDir1/CapsDir/AbC.txt
  C CapsDir1/CapsDir/SubDir/Def.txt

  $ hg files capsdir1/capsdir
  CapsDir1/CapsDir/AbC.txt
  CapsDir1/CapsDir/SubDir/Def.txt

  $ echo xyz > CapsDir1/CapsDir/SubDir/Def.txt
  $ hg ci -m xyz capsdir1/capsdir/subdir/def.txt

  $ hg revert -r '.^' capsdir1/capsdir
  reverting CapsDir1/CapsDir/SubDir/Def.txt

The conditional tests above mean the hash on the diff line differs on Windows
and OS X
  $ hg diff capsdir1/capsdir
  diff -r * CapsDir1/CapsDir/SubDir/Def.txt (glob)
  --- a/CapsDir1/CapsDir/SubDir/Def.txt	Thu Jan 01 00:00:00 1970 +0000
  +++ b/CapsDir1/CapsDir/SubDir/Def.txt	* (glob)
  @@ -1,1 +1,1 @@
  -xyz
  +def

  $ hg mv CapsDir1/CapsDir/abc.txt CapsDir1/CapsDir/ABC.txt
  $ hg ci -m "case changing rename" CapsDir1/CapsDir/AbC.txt CapsDir1/CapsDir/ABC.txt

  $ hg status -A capsdir1/capsdir
  M CapsDir1/CapsDir/SubDir/Def.txt
  C CapsDir1/CapsDir/ABC.txt

  $ hg remove -f 'glob:**.txt' -X capsdir1/capsdir
  $ hg remove -f 'glob:**.txt' -I capsdir1/capsdir
  removing CapsDir1/CapsDir/ABC.txt
  removing CapsDir1/CapsDir/SubDir/Def.txt
#endif

  $ cd ..

test --dry-run mode in forget

  $ hg init testdir_forget
  $ cd testdir_forget
  $ echo foo > foo
  $ hg add foo
  $ hg commit -m "foo"
  $ hg forget foo --dry-run -v
  removing foo
  $ hg diff
  $ hg forget not_exist -n
  not_exist: $ENOENT$
  [1]

  $ cd ..

test --interactive mode in forget

  $ hg init interactiveforget
  $ cd interactiveforget
  $ echo foo > foo
  $ hg commit -qAm "foo"
  $ echo bar > bar
  $ hg commit -qAm "bar"
  $ hg forget foo --dry-run -i
  abort: cannot specify both --dry-run and --interactive
  [255]

  $ hg forget foo --config ui.interactive=True -i << EOF
  > ?
  > n
  > EOF
  forget foo [Ynsa?] ?
  y - yes, forget this file
  n - no, skip this file
  s - skip remaining files
  a - include all remaining files
  ? - ? (display help)
  forget foo [Ynsa?] n

  $ hg forget foo bar --config ui.interactive=True -i << EOF
  > y
  > n
  > EOF
  forget bar [Ynsa?] y
  forget foo [Ynsa?] n
  removing bar
  $ hg status
  R bar
  $ hg up -qC .

  $ hg forget foo bar --config ui.interactive=True -i << EOF
  > s
  > EOF
  forget bar [Ynsa?] s
  $ hg st
  $ hg up -qC .

  $ hg forget foo bar --config ui.interactive=True -i << EOF
  > a
  > EOF
  forget bar [Ynsa?] a
  removing bar
  removing foo
  $ hg status
  R bar
  R foo
  $ hg up -qC .

  $ cd ..