repoview: discard filtered changelog if index isn't shared with unfiltered
Before this patch, revisions rollbacked at failure of previous
transaction might be visible at subsequent operations unintentionally,
if repoview object is reused even after failure of transaction:
e.g. command server and HTTP server are typical cases.
'repoview' uses the tuple of values below of unfiltered changelog as
"the key" to examine validity of filtered changelog cache.
- length
- tip node
- filtered revisions (as hashed value)
- '_delayed' field
'repoview' compares between "the key" of unfiltered changelog at
previous caching and now, and reuses filtered changelog cache if no
change is detected.
But this comparison indicates only that there is no change between
unfiltered 'repo.changelog' at last caching and now, but not that
filtered changelog cache is valid for current unfiltered one.
'repoview' uses "shallow copy" of unfiltered changelog to create
filtered changelog cache. In this case, 'index' buffer of unfiltered
changelog is also referred by filtered changelog.
At failure of transaction, unfiltered changelog itself is invalidated
(= un-referred) on the 'repo' side (see
0a7610758c42 also). But
'index' of it still contains revisions to be rollbacked at this
failure, and is referred by filtered changelog.
Therefore, even if there is no change between unfiltered
'repo.changelog' at last caching and now, steps below makes rollbacked
revisions visible via filtered changelog unintentionally.
1. instantiate unfiltered changelog as 'repo.changelog'
(call it CL1)
2. make filtered (= shallow copy of) CL1
(call it FCL1)
3. cache FCL1 with "the key" of CL1
4. revisions are appended to 'index', which is shared by CL1 and FCL1
5. invalidate 'repo.changelog' (= CL1) at failure of transaction
6. instantiate 'repo.changelog' again at next operation
(call it CL2)
CL2 doesn't have revisions added at (4), because it is
instantiated from '00changelog.i', which isn't changed while
failed transaction.
7. compare between "the key" of CL1 and CL2
8. FCL1 cached at (3) is reused, because comparison at (7) doesn't
detect change between CL1 at (1) and CL2
9. revisions rollbacked at (5) are visible via FCL1 unintentionally,
because FCL1 still refers 'index' changed at (4)
The root cause of this issue is that there is no examination about
validity of filtered changelog cache against current unfiltered one.
This patch discards filtered changelog cache, if its 'index' object
isn't shared with unfiltered one.
BTW, at the time of this patch, redundant truncation of
'00changelog.i' at failure of transaction (see
0a7610758c42 for
detail) often prevents "hg serve" from making already rollbacked
revisions visible, because updating timestamps of '00changelog.i' by
truncation makes "hg serve" discard old repoview object with invalid
filtered changelog cache.
This is reason why this issue is overlooked before this patch, even
though test-bundle2-exchange.t has tests in similar situation: failure
of "hg push" via HTTP by pretxnclose hook on server side doesn't
prevent subsequent commands from looking up outgoing revisions
correctly.
But timestamp on the filesystem doesn't have enough resolution for
recent computation power, and it can't be assumed that this avoidance
always works as expected.
Therefore, without this patch, this issue might appear occasionally.
#require killdaemons
Test wire protocol argument passing
Setup repo:
$ hg init repo
Local:
$ hg debugwireargs repo eins zwei --three drei --four vier
eins zwei drei vier None
$ hg debugwireargs repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs repo eins zwei
eins zwei None None None
$ hg debugwireargs repo eins zwei --five fuenf
eins zwei None None fuenf
HTTP:
$ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid -E error.log -A access.log
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)
* - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)
HTTP without the httpheader capability:
$ HGRCPATH="`pwd`/repo/.hgrc"
$ export HGRCPATH
$ CAP=httpheader
$ . "$TESTDIR/notcapable"
$ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
$ cat hg2.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
eins zwei None None None
$ cat error2.log
$ cat access2.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
* - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
SSH (try to exercise the ssh functionality with a dummy script):
$ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo uno due tre quattro
uno due tre quattro None
$ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei
eins zwei None None None
$ hg debugwireargs --ssh "python $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
eins zwei None None None
Explicitly kill daemons to let the test exit on Windows
$ killdaemons.py