Set up repo
$ hg --config experimental.treemanifest=True init repo
$ cd repo
Requirements get set on init
$ hg debugrequires | grep treemanifest
treemanifest
Without directories, looks like any other repo
$ echo 0 > a
$ echo 0 > b
$ hg ci -Aqm initial
$ hg debugdata -m 0
a\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
b\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
Submanifest is stored in separate revlog
$ mkdir dir1
$ echo 1 > dir1/a
$ echo 1 > dir1/b
$ echo 1 > e
$ hg ci -Aqm 'add dir1'
$ hg debugdata -m 1
a\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
b\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
dir1\x008b3ffd73f901e83304c83d33132c8e774ceac44et (esc)
e\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
$ hg debugdata --dir dir1 0
a\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
b\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
Can add nested directories
$ mkdir dir1/dir1
$ echo 2 > dir1/dir1/a
$ echo 2 > dir1/dir1/b
$ mkdir dir1/dir2
$ echo 2 > dir1/dir2/a
$ echo 2 > dir1/dir2/b
$ hg ci -Aqm 'add dir1/dir1'
$ hg files -r .
a
b
dir1/a
dir1/b
dir1/dir1/a
dir1/dir1/b
dir1/dir2/a
dir1/dir2/b
e
The manifest command works
$ hg manifest
a
b
dir1/a
dir1/b
dir1/dir1/a
dir1/dir1/b
dir1/dir2/a
dir1/dir2/b
e
Revision is not created for unchanged directory
$ mkdir dir2
$ echo 3 > dir2/a
$ hg add dir2
adding dir2/a
$ hg debugindex --dir dir1 > before
$ hg ci -qm 'add dir2'
$ hg debugindex --dir dir1 > after
$ diff before after
$ rm before after
Removing directory does not create an revlog entry
$ hg rm dir1/dir1
removing dir1/dir1/a
removing dir1/dir1/b
$ hg debugindex --dir dir1/dir1 > before
$ hg ci -qm 'remove dir1/dir1'
$ hg debugindex --dir dir1/dir1 > after
$ diff before after
$ rm before after
Check that hg files (calls treemanifest.walk()) works
without loading all directory revlogs
$ hg co 'desc("add dir2")'
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ mv .hg/store/meta/dir2 .hg/store/meta/dir2-backup
$ hg files -r . dir1
dir1/a
dir1/b
dir1/dir1/a
dir1/dir1/b
dir1/dir2/a
dir1/dir2/b
Check that status between revisions works (calls treemanifest.matches())
without loading all directory revlogs
$ hg status --rev 'desc("add dir1")' --rev . dir1
A dir1/dir1/a
A dir1/dir1/b
A dir1/dir2/a
A dir1/dir2/b
$ mv .hg/store/meta/dir2-backup .hg/store/meta/dir2
Merge creates 2-parent revision of directory revlog
$ echo 5 > dir1/a
$ hg ci -Aqm 'modify dir1/a'
$ hg co '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 6 > dir1/b
$ hg ci -Aqm 'modify dir1/b'
$ hg merge 'desc("modify dir1/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m 'conflict-free merge involving dir1/'
$ cat dir1/a
5
$ cat dir1/b
6
$ hg debugindex --dir dir1
rev linkrev nodeid p1-nodeid p2-nodeid
0 1 8b3ffd73f901 000000000000 000000000000
1 2 68e9d057c5a8 8b3ffd73f901 000000000000
2 4 4698198d2624 68e9d057c5a8 000000000000
3 5 44844058ccce 68e9d057c5a8 000000000000
4 6 bf3d9b744927 68e9d057c5a8 000000000000
5 7 dde7c0af2a03 bf3d9b744927 44844058ccce
Merge keeping directory from parent 1 does not create revlog entry. (Note that
dir1's manifest does change, but only because dir1/a's filelog changes.)
$ hg co 'desc("add dir2")'
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 8 > dir2/a
$ hg ci -m 'modify dir2/a'
created new head
$ hg debugindex --dir dir2 > before
$ hg merge 'desc("modify dir1/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg revert -r 'desc("modify dir2/a")' .
reverting dir1/a
$ hg ci -m 'merge, keeping parent 1'
$ hg debugindex --dir dir2 > after
$ diff before after
$ rm before after
Merge keeping directory from parent 2 does not create revlog entry. (Note that
dir2's manifest does change, but only because dir2/a's filelog changes.)
$ hg co 'desc("modify dir2/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugindex --dir dir1 > before
$ hg merge 'desc("modify dir1/a")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg revert -r 'desc("modify dir1/a")' .
reverting dir2/a
$ hg ci -m 'merge, keeping parent 2'
created new head
$ hg debugindex --dir dir1 > after
$ diff before after
$ rm before after
Create flat source repo for tests with mixed flat/tree manifests
$ cd ..
$ hg init repo-flat
$ cd repo-flat
Create a few commits with flat manifest
$ echo 0 > a
$ echo 0 > b
$ echo 0 > e
$ for d in dir1 dir1/dir1 dir1/dir2 dir2
> do
> mkdir $d
> echo 0 > $d/a
> echo 0 > $d/b
> done
$ hg ci -Aqm initial
$ echo 1 > a
$ echo 1 > dir1/a
$ echo 1 > dir1/dir1/a
$ hg ci -Aqm 'modify on branch 1'
$ hg co 0
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 2 > b
$ echo 2 > dir1/b
$ echo 2 > dir1/dir1/b
$ hg ci -Aqm 'modify on branch 2'
$ hg merge 1
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m 'merge of flat manifests to new flat manifest'
$ cd ..
$ hg -R repo-flat serve -p $HGPORT -d \
> --pid-file=port-0-hg.pid \
> --errorlog=port-0-errors.log
$ cat port-0-hg.pid >> $DAEMON_PIDS
Create clone with tree manifests enabled
$ hg clone --config experimental.treemanifest=1 \
> http://localhost:$HGPORT repo-mixed -r 1
adding changesets
adding manifests
adding file changes
added 2 changesets with 14 changes to 11 files
new changesets 5b02a3e8db7e:581ef6037d8b
updating to branch default
11 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat port-0-errors.log
$ cd repo-mixed
$ test -d .hg/store/meta
[1]
$ hg debugrequires | grep treemanifest
treemanifest
Should be possible to push updates from flat to tree manifest repo
$ hg -R ../repo-flat push ssh://user@dummy/repo-mixed
pushing to ssh://user@dummy/repo-mixed
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 3 changes to 3 files
Commit should store revlog per directory
$ hg co 1
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 3 > a
$ echo 3 > dir1/a
$ echo 3 > dir1/dir1/a
$ hg ci -m 'first tree'
created new head
$ find .hg/store/meta | sort
.hg/store/meta
.hg/store/meta/dir1
.hg/store/meta/dir1/00manifest.i
.hg/store/meta/dir1/dir1
.hg/store/meta/dir1/dir1/00manifest.i
.hg/store/meta/dir1/dir2
.hg/store/meta/dir1/dir2/00manifest.i
.hg/store/meta/dir2
.hg/store/meta/dir2/00manifest.i
Merge of two trees
$ hg co 2
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 1
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m 'merge of flat manifests to new tree manifest'
created new head
$ hg diff -r 3
Parent of tree root manifest should be flat manifest, and two for merge
$ hg debugindex -m
rev linkrev nodeid p1-nodeid p2-nodeid
0 0 40536115ed9e 000000000000 000000000000
1 1 f3376063c255 40536115ed9e 000000000000
2 2 5d9b9da231a2 40536115ed9e 000000000000
3 3 d17d663cbd8a 5d9b9da231a2 f3376063c255
4 4 51e32a8c60ee f3376063c255 000000000000
5 5 cc5baa78b230 5d9b9da231a2 f3376063c255
Status across flat/tree boundary should work
$ hg status --rev '.^' --rev .
M a
M dir1/a
M dir1/dir1/a
Turning off treemanifest config has no effect
$ hg debugindex --dir dir1
rev linkrev nodeid p1-nodeid p2-nodeid
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
$ echo 2 > dir1/a
$ hg --config experimental.treemanifest=False ci -qm 'modify dir1/a'
$ hg debugindex --dir dir1
rev linkrev nodeid p1-nodeid p2-nodeid
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
2 6 5b16163a30c6 25ecb8cb8618 000000000000
Stripping and recovering changes should work
$ hg st --change tip
M dir1/a
$ hg --config extensions.strip= strip tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/repo-mixed/.hg/strip-backup/51cfd7b1e13b-78a2f3ed-backup.hg
$ hg debugindex --dir dir1
rev linkrev nodeid p1-nodeid p2-nodeid
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
#if repobundlerepo
$ hg incoming .hg/strip-backup/*
comparing with .hg/strip-backup/*-backup.hg (glob)
searching for changes
changeset: 6:51cfd7b1e13b
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify dir1/a
#endif
$ hg unbundle .hg/strip-backup/*
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 51cfd7b1e13b (1 drafts)
(run 'hg update' to get a working copy)
$ hg --config extensions.strip= strip tip
saved backup bundle to $TESTTMP/repo-mixed/.hg/strip-backup/*-backup.hg (glob)
$ hg unbundle -q .hg/strip-backup/*
$ hg debugindex --dir dir1
rev linkrev nodeid p1-nodeid p2-nodeid
0 4 064927a0648a 000000000000 000000000000
1 5 25ecb8cb8618 000000000000 000000000000
2 6 5b16163a30c6 25ecb8cb8618 000000000000
$ hg st --change tip
M dir1/a
Shelving and unshelving should work
$ echo foo >> dir1/a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg unshelve
unshelving change 'default'
$ hg diff --nodates
diff -r 708a273da119 dir1/a
--- a/dir1/a
+++ b/dir1/a
@@ -1,1 +1,2 @@
1
+foo
Pushing from treemanifest repo to an empty repo makes that a treemanifest repo
$ cd ..
$ hg init empty-repo
$ cat << EOF >> empty-repo/.hg/hgrc
> [experimental]
> changegroup3=yes
> EOF
$ hg debugrequires -R empty-repo | grep treemanifest
[1]
$ hg push -R repo -r 0 empty-repo
pushing to empty-repo
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
$ hg debugrequires -R empty-repo | grep treemanifest
treemanifest
Pushing to an empty repo works
$ hg --config experimental.treemanifest=1 init clone
$ hg debugrequires -R clone | grep treemanifest
treemanifest
$ hg push -R repo clone
pushing to clone
searching for changes
adding changesets
adding manifests
adding file changes
added 11 changesets with 15 changes to 10 files (+3 heads)
$ hg debugrequires -R clone | grep treemanifest
treemanifest
$ hg -R clone verify -q
Create deeper repo with tree manifests.
$ hg --config experimental.treemanifest=True init deeprepo
$ cd deeprepo
$ mkdir .A
$ mkdir b
$ mkdir b/bar
$ mkdir b/bar/orange
$ mkdir b/bar/orange/fly
$ mkdir b/foo
$ mkdir b/foo/apple
$ mkdir b/foo/apple/bees
$ touch .A/one.txt
$ touch .A/two.txt
$ touch b/bar/fruits.txt
$ touch b/bar/orange/fly/gnat.py
$ touch b/bar/orange/fly/housefly.txt
$ touch b/foo/apple/bees/flower.py
$ touch c.txt
$ touch d.py
$ hg ci -Aqm 'initial'
$ echo >> .A/one.txt
$ echo >> .A/two.txt
$ echo >> b/bar/fruits.txt
$ echo >> b/bar/orange/fly/gnat.py
$ echo >> b/bar/orange/fly/housefly.txt
$ echo >> b/foo/apple/bees/flower.py
$ echo >> c.txt
$ echo >> d.py
$ hg ci -Aqm 'second'
We'll see that visitdir works by removing some treemanifest revlogs and running
the files command with various parameters.
Test files from the root.
$ hg files -r .
.A/one.txt
.A/two.txt
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
b/foo/apple/bees/flower.py
c.txt
d.py
Excludes with a glob should not exclude everything from the glob's root
$ hg files -r . -X 'b/fo?' b
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
$ cp -R .hg/store .hg/store-copy
Test files for a subdirectory.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ hg files -r . b
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
b/foo/apple/bees/flower.py
$ hg diff -r '.^' -r . --stat b
b/bar/fruits.txt | 1 +
b/bar/orange/fly/gnat.py | 1 +
b/bar/orange/fly/housefly.txt | 1 +
b/foo/apple/bees/flower.py | 1 +
4 files changed, 4 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files with just includes and excludes.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/bar/orange/fly
$ rm -r .hg/store/meta/b/foo/apple/bees
$ hg files -r . -I path:b/bar -X path:b/bar/orange/fly -I path:b/foo -X path:b/foo/apple/bees
b/bar/fruits.txt
$ hg diff -r '.^' -r . --stat -I path:b/bar -X path:b/bar/orange/fly -I path:b/foo -X path:b/foo/apple/bees
b/bar/fruits.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files for a subdirectory, excluding a directory within it.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/foo
$ hg files -r . -X path:b/foo b
b/bar/fruits.txt
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
$ hg diff -r '.^' -r . --stat -X path:b/foo b
b/bar/fruits.txt | 1 +
b/bar/orange/fly/gnat.py | 1 +
b/bar/orange/fly/housefly.txt | 1 +
3 files changed, 3 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files for a sub directory, including only a directory within it, and
including an unrelated directory.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/foo
$ hg files -r . -I path:b/bar/orange -I path:a b
b/bar/orange/fly/gnat.py
b/bar/orange/fly/housefly.txt
$ hg diff -r '.^' -r . --stat -I path:b/bar/orange -I path:a b
b/bar/orange/fly/gnat.py | 1 +
b/bar/orange/fly/housefly.txt | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Test files for a pattern, including a directory, and excluding a directory
within that.
#if reporevlogstore
$ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
$ rm -r .hg/store/meta/._a
#endif
$ rm -r .hg/store/meta/b/foo
$ rm -r .hg/store/meta/b/bar/orange
$ hg files -r . glob:**.txt -I path:b/bar -X path:b/bar/orange
b/bar/fruits.txt
$ hg diff -r '.^' -r . --stat glob:**.txt -I path:b/bar -X path:b/bar/orange
b/bar/fruits.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ cp -R .hg/store-copy/. .hg/store
Add some more changes to the deep repo
$ echo narf >> b/bar/fruits.txt
$ hg ci -m narf
$ echo troz >> b/bar/orange/fly/gnat.py
$ hg ci -m troz
Verify works
$ hg verify -q
#if repofncache
Dirlogs are included in fncache
$ grep meta/.A/00manifest.i .hg/store/fncache
meta/.A/00manifest.i
Rebuilt fncache includes dirlogs
$ rm .hg/store/fncache
$ hg debugrebuildfncache
adding data/.A/one.txt.i
adding data/.A/two.txt.i
adding data/b/bar/fruits.txt.i
adding data/b/bar/orange/fly/gnat.py.i
adding data/b/bar/orange/fly/housefly.txt.i
adding data/b/foo/apple/bees/flower.py.i
adding data/c.txt.i
adding data/d.py.i
adding meta/.A/00manifest.i
adding meta/b/00manifest.i
adding meta/b/bar/00manifest.i
adding meta/b/bar/orange/00manifest.i
adding meta/b/bar/orange/fly/00manifest.i
adding meta/b/foo/00manifest.i
adding meta/b/foo/apple/00manifest.i
adding meta/b/foo/apple/bees/00manifest.i
16 items added, 0 removed from fncache
#endif
Finish first server
$ killdaemons.py
Back up the recently added revlogs
$ cp -R .hg/store .hg/store-newcopy
Verify reports missing dirlog
$ rm .hg/store/meta/b/00manifest.*
$ hg verify
checking changesets
checking manifests
checking directory manifests
0: empty or missing b/
b/@0: parent-directory manifest refers to unknown revision 67688a370455
b/@1: parent-directory manifest refers to unknown revision f065da70369e
b/@2: parent-directory manifest refers to unknown revision ac0d30948e0b
b/@3: parent-directory manifest refers to unknown revision 367152e6af28
warning: orphan data file 'meta/b/bar/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/bar/orange/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/bar/orange/fly/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/foo/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/foo/apple/00manifest.i' (reporevlogstore !)
warning: orphan data file 'meta/b/foo/apple/bees/00manifest.i' (reporevlogstore !)
crosschecking files in changesets and manifests
b/bar/fruits.txt@0: in changeset but not in manifest
b/bar/orange/fly/gnat.py@0: in changeset but not in manifest
b/bar/orange/fly/housefly.txt@0: in changeset but not in manifest
b/foo/apple/bees/flower.py@0: in changeset but not in manifest
checking files
not checking dirstate because of previous errors
checked 4 changesets with 18 changes to 8 files
6 warnings encountered! (reporevlogstore !)
9 integrity errors encountered!
(first damaged changeset appears to be 0)
[1]
$ cp -R .hg/store-newcopy/. .hg/store
Verify reports missing dirlog entry
$ mv -f .hg/store-copy/meta/b/00manifest.* .hg/store/meta/b/
$ hg verify
checking changesets
checking manifests
checking directory manifests
b/@2: parent-directory manifest refers to unknown revision ac0d30948e0b
b/@3: parent-directory manifest refers to unknown revision 367152e6af28
b/bar/@?: rev 2 points to unexpected changeset 2
b/bar/@?: 44d7e1146e0d not in parent-directory manifest
b/bar/@?: rev 3 points to unexpected changeset 3
b/bar/@?: 70b10c6b17b7 not in parent-directory manifest
b/bar/orange/@?: rev 2 points to unexpected changeset 3
(expected None)
b/bar/orange/fly/@?: rev 2 points to unexpected changeset 3
(expected None)
crosschecking files in changesets and manifests
checking files
not checking dirstate because of previous errors
checked 4 changesets with 18 changes to 8 files
2 warnings encountered!
8 integrity errors encountered!
(first damaged changeset appears to be 2)
[1]
$ cp -R .hg/store-newcopy/. .hg/store
Test cloning a treemanifest repo over http.
$ cd ..
$ hg -R deeprepo serve -p $HGPORT -d \
> --pid-file=port-0-hg.pid \
> --errorlog=port-0-errors.log
$ cat port-0-hg.pid >> $DAEMON_PIDS
We can clone even with the knob turned off and we'll get a treemanifest repo.
$ hg clone --config experimental.treemanifest=False \
> --config experimental.changegroup3=True \
> http://localhost:$HGPORT deepclone
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 18 changes to 8 files
new changesets 775704be6f52:523e5c631710
updating to branch default
8 files updated, 0 files merged, 0 files removed, 0 files unresolved
No server errors.
$ cat port-0-errors.log
requires got updated to include treemanifest
$ hg debugrequires -R deepclone | grep treemanifest
treemanifest
Tree manifest revlogs exist.
$ find deepclone/.hg/store/meta | sort
deepclone/.hg/store/meta
deepclone/.hg/store/meta/._a (reposimplestore !)
deepclone/.hg/store/meta/._a/00manifest.i (reposimplestore !)
deepclone/.hg/store/meta/b
deepclone/.hg/store/meta/b/00manifest.i
deepclone/.hg/store/meta/b/bar
deepclone/.hg/store/meta/b/bar/00manifest.i
deepclone/.hg/store/meta/b/bar/orange
deepclone/.hg/store/meta/b/bar/orange/00manifest.i
deepclone/.hg/store/meta/b/bar/orange/fly
deepclone/.hg/store/meta/b/bar/orange/fly/00manifest.i
deepclone/.hg/store/meta/b/foo
deepclone/.hg/store/meta/b/foo/00manifest.i
deepclone/.hg/store/meta/b/foo/apple
deepclone/.hg/store/meta/b/foo/apple/00manifest.i
deepclone/.hg/store/meta/b/foo/apple/bees
deepclone/.hg/store/meta/b/foo/apple/bees/00manifest.i
deepclone/.hg/store/meta/~2e_a (reporevlogstore !)
deepclone/.hg/store/meta/~2e_a/00manifest.i (reporevlogstore !)
Verify passes.
$ cd deepclone
$ hg verify -q
$ cd ..
#if reporevlogstore
Create clones using old repo formats to use in later tests
$ hg clone --config format.usestore=False \
> --config experimental.changegroup3=True \
> http://localhost:$HGPORT deeprepo-basicstore
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 18 changes to 8 files
new changesets 775704be6f52:523e5c631710
updating to branch default
8 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R deeprepo-basicstore debugrequires | grep store
[1]
$ hg -R deeprepo-basicstore serve -p $HGPORT1 -d \
> --pid-file=port-1-hg.pid \
> --errorlog=port-1-errors.log
$ cat port-1-hg.pid >> $DAEMON_PIDS
$ hg clone --config format.usefncache=False \
> --config experimental.changegroup3=True \
> http://localhost:$HGPORT deeprepo-encodedstore
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 18 changes to 8 files
new changesets 775704be6f52:523e5c631710
updating to branch default
8 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R deeprepo-encodedstore debugrequires | grep fncache
[1]
$ hg -R deeprepo-encodedstore serve -p $HGPORT2 -d \
> --pid-file=port-2-hg.pid \
> --errorlog=port-2-errors.log
$ cat port-2-hg.pid >> $DAEMON_PIDS
Local clone with basicstore
$ hg clone -U deeprepo-basicstore local-clone-basicstore
$ hg -R local-clone-basicstore verify -q
Local clone with encodedstore
$ hg clone -U deeprepo-encodedstore local-clone-encodedstore
$ hg -R local-clone-encodedstore verify -q
Local clone with fncachestore
$ hg clone -U deeprepo local-clone-fncachestore
$ hg -R local-clone-fncachestore verify -q
Stream clone with basicstore
$ hg clone --config experimental.changegroup3=True --stream -U \
> http://localhost:$HGPORT1 stream-clone-basicstore
streaming all changes
24 files to transfer, * of data (glob) (no-rust !)
26 files to transfer, * of data (glob) (rust !)
transferred * in * seconds (*) (glob)
$ hg -R stream-clone-basicstore verify -q
$ cat port-1-errors.log
Stream clone with encodedstore
$ hg clone --config experimental.changegroup3=True --stream -U \
> http://localhost:$HGPORT2 stream-clone-encodedstore
streaming all changes
24 files to transfer, * of data (glob) (no-rust !)
26 files to transfer, * of data (glob) (rust !)
transferred * in * seconds (*) (glob)
$ hg -R stream-clone-encodedstore verify -q
$ cat port-2-errors.log
Stream clone with fncachestore
$ hg clone --config experimental.changegroup3=True --stream -U \
> http://localhost:$HGPORT stream-clone-fncachestore
streaming all changes
23 files to transfer, * of data (glob) (no-rust !)
25 files to transfer, * of data (glob) (rust !)
transferred * in * seconds (*) (glob)
$ hg -R stream-clone-fncachestore verify -q
$ cat port-0-errors.log
Packed bundle
$ hg -R deeprepo debugcreatestreamclonebundle repo-packed.hg
writing 5330 bytes for 19 files (no-zstd !)
writing 5400 bytes for 19 files (zstd no-rust !)
writing 5654 bytes for 21 files (zstd rust !)
bundle requirements:.* treemanifest(,.*)? (re)
$ hg debugbundle --spec repo-packed.hg
none-packed1;requirements%3D(.*%2C)?treemanifest(%2C.*)? (re)
#endif
Bundle with changegroup2 is not supported
$ hg -R deeprepo bundle --all -t v2 deeprepo.bundle
abort: repository does not support bundle version 02
[255]
Pull does not include changegroup for manifest the client already has from
other branch
$ mkdir grafted-dir-repo
$ cd grafted-dir-repo
$ hg --config experimental.treemanifest=1 init
$ mkdir dir
$ echo a > dir/file
$ echo a > file
$ hg ci -Am initial
adding dir/file
adding file
$ echo b > dir/file
$ hg ci -m updated
$ hg co '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg revert -r tip dir/
reverting dir/file
$ echo b > file # to make sure root manifest is sent
$ hg ci -m grafted
created new head
$ cd ..
$ hg --config experimental.treemanifest=1 clone --pull -r 1 \
> grafted-dir-repo grafted-dir-repo-clone
adding changesets
adding manifests
adding file changes
added 2 changesets with 3 changes to 2 files
new changesets d84f4c419457:09ab742f3b0f
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd grafted-dir-repo-clone
$ hg pull -r 2
pulling from $TESTTMP/grafted-dir-repo
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets 73699489fb7c
(run 'hg heads' to see heads, 'hg merge' to merge)
Committing a empty commit does not duplicate root treemanifest
$ echo z >> z
$ hg commit -Aqm 'pre-empty commit'
$ hg rm z
$ hg commit --amend -m 'empty commit'
saved backup bundle to $TESTTMP/grafted-dir-repo-clone/.hg/strip-backup/cb99d5717cea-9e3b6b02-amend.hg
$ hg log -r 'tip + tip^' -T '{manifest}\n'
1:678d3574b88c
1:678d3574b88c
$ hg --config extensions.strip= strip -r . -q
Testing repository upgrade
--------------------------
$ for x in 1 2 3 4 5 6 7 8 9; do
> echo $x > file-$x # make sure we have interresting compression
> echo $x > dir/foo-$x # make sure we have interresting compression
> hg add file-$x
> hg add dir/foo-$x
> done
$ hg ci -m 'have some content'
$ f -s .hg/store/00manifest.*
.hg/store/00manifest.i: size=798 (no-pure no-rust !)
.hg/store/00manifest.i: size=800 (rust !)
.hg/store/00manifest.i: size=784 (pure no-rust !)
$ f -s .hg/store/meta/dir/00manifest*
.hg/store/meta/dir/00manifest.i: size=556 (no-pure no-rust !)
.hg/store/meta/dir/00manifest.i: size=557 (rust !)
.hg/store/meta/dir/00manifest.i: size=544 (pure no-rust !)
$ hg debugupgraderepo --config format.revlog-compression=none --config experimental.treemanifest=yes --run --quiet --no-backup
upgrade will perform the following actions:
requirements
preserved: * (glob)
removed: revlog-compression-zstd (no-pure !)
added: exp-compression-none
processed revlogs:
- all-filelogs
- changelog
- manifest
$ hg verify
checking changesets
checking manifests
checking directory manifests
crosschecking files in changesets and manifests
checking files
checking dirstate
checked 4 changesets with 22 changes to 20 files
$ f -s .hg/store/00manifest.*
.hg/store/00manifest.i: size=1002
$ f -s .hg/store/meta/dir/00manifest*
.hg/store/meta/dir/00manifest.i: size=721
$ hg files --rev tip | wc -l
\s*20 (re)
testing cache update warming persistent nodemaps
------------------------------------------------
$ hg debugupdatecache