view tests/test-http-api-httpv2.t @ 45761:341e014fe0fb stable

repoview: only pin obsolete wdir parents while there are unresolved conflicts

I noticed after doing an update from an obsolete revision with a dirty wdir that
the obsolete commit stayed visible for no obvious reason.  It was decided in
85b03b1e4715 not to clear mergestate once all of the conflicts were resolved, in
order to allow re-resolving.  Since the point of pinning the obsolete parents
was to allow resolving in the first place (aaeccdb6e654), it makes sense to also
gate it on whether or not there are any remaining files to resolve.  This might
result in pinning again if files are marked unresolved again, but that seems
reasonable, given that it still solves the original issue.

Note that this isn't purely cosmetic- pushing with a pinned obsolete revision is
likely to cause complaints about pushing multiple heads or other unexpected
errors.  So the faster it comes out of that state, the better.

Differential Revision: https://phab.mercurial-scm.org/D9248

#require no-chg

  $ . $TESTDIR/wireprotohelpers.sh
  $ enabledummycommands

  $ hg init server
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > EOF
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

HTTP v2 protocol not enabled by default

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003 HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 33\r\n
  s>     \r\n
  s>     API exp-http-v2-0003 not enabled\n

Restart server with support for HTTP v2 API

  $ killdaemons.py
  $ enablehttpv2 server
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

Request to unknown command yields 404

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

GET to read-only command yields a 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Missing Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: invalid
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: invalid\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Content-Type header results in 415

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     user-agent: test
  >     content-type: badmedia
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: badmedia\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 415 Unsupported Media Type\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 88\r\n
  s>     \r\n
  s>     client MUST send Content-Type header with value: application/mercurial-exp-framing-0006\n

Request to read-only command works out of the box

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

  $ sendhttpv2peerverbose << EOF
  > command customreadonly
  > EOF
  creating http peer for wire protocol version 2
  sending customreadonly command
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 65\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x15\x00\x00\x01\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041
  s>     X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: gen[
    b'customreadonly bytes response'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

Request to read-write command fails because server is read-only by default

GET to read-write request yields 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Even for unknown commands

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

SSL required by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 403 ssl required\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Length: 17\r\n
  s>     \r\n
  s>     permission denied

Restart server to allow non-ssl read-write operations

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Authorized request for valid read-write command works

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Authorized request for unknown command is rejected

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/badcommand
  >     user-agent: test
  >     accept: $MEDIATYPE
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

debugreflect isn't enabled by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 34\r\n
  s>     \r\n
  s>     debugreflect service not available

Restart server to get debugreflect endpoint

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Command frames can be reflected via debugreflect

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'command1', b'args': {b'foo': b'val1', b'bar1': b'val'}}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 47\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \'\x00\x00\x01\x00\x01\x01\x11\xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 223\r\n
  s>     \r\n
  s>     received: 1 1 1 \xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1\n
  s>     ["runcommand", {"args": {"bar1": "val", "foo": "val1"}, "command": "command1", "data": null, "redirect": null, "requestid": 1}]\n
  s>     received: <no frame>\n
  s>     {"action": "noop"}

Multiple requests to regular command URL are not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Multiple requests to "multirequest" URL are allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  >     frame 3 1 0 command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     *\r\n (glob)
  s>     user-agent: test\r\n
  s>     content-length: 58\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly\x15\x00\x00\x03\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x03\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Interleaved requests to "multirequest" are processed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request continuation JnamespacesDnameHlistkeys
  >     frame 1 1 0 command-request continuation IbookmarksDnameHlistkeys
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 115\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x11\x00\x00\x01\x00\x01\x01\x15\xa2Dargs\xa1Inamespace\x11\x00\x00\x03\x00\x01\x00\x15\xa2Dargs\xa1Inamespace\x19\x00\x00\x03\x00\x01\x00\x12JnamespacesDnameHlistkeys\x18\x00\x00\x01\x00\x01\x00\x12IbookmarksDnameHlistkeys
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x03\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     28\r\n
  s>      \x00\x00\x03\x00\x02\x041\xa3Ibookmarks@Jnamespaces@Fphases@
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     9\r\n
  s>     \x01\x00\x00\x01\x00\x02\x041\xa0
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Restart server to disable read-write access

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Attempting to run a read-write command via multirequest on read-only URL is not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'pushkey'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 22\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x0e\x00\x00\x01\x00\x01\x01\x11\xa1DnameGpushkey
  s> makefile('rb', None)
  s>     HTTP/1.1 403 Forbidden\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 52\r\n
  s>     \r\n
  s>     insufficient permissions to execute command: pushkey

Defining an invalid content encoding results in warning

  $ hg --config experimental.httppeer.v2-encoder-order=identity,badencoder --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  wire protocol version 2 encoder referenced in config (badencoder) is not known; ignoring
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 56\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  s>     1e\r\n
  s>     \x16\x00\x00\x01\x00\x02\x041
  s>     \x81T\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#if zstd

  $ hg --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 70\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     *\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x83Hzstd-8mbDzlibHidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hzstd-8mb
  s>     \r\n
  s>     25\r\n
  s>     \x1d\x00\x00\x01\x00\x02\x042
  s>     (\xb5/\xfd\x00X\xa4\x00\x00p\xa1FstatusBok\x81T\x00\x01\x00\tP\x02
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#endif

  $ cat error.log