view tests/test-merge-exec.t @ 45761:341e014fe0fb stable

repoview: only pin obsolete wdir parents while there are unresolved conflicts

I noticed after doing an update from an obsolete revision with a dirty wdir that
the obsolete commit stayed visible for no obvious reason.  It was decided in
85b03b1e4715 not to clear mergestate once all of the conflicts were resolved, in
order to allow re-resolving.  Since the point of pinning the obsolete parents
was to allow resolving in the first place (aaeccdb6e654), it makes sense to also
gate it on whether or not there are any remaining files to resolve.  This might
result in pinning again if files are marked unresolved again, but that seems
reasonable, given that it still solves the original issue.

Note that this isn't purely cosmetic- pushing with a pinned obsolete revision is
likely to cause complaints about pushing multiple heads or other unexpected
errors.  So the faster it comes out of that state, the better.

Differential Revision: https://phab.mercurial-scm.org/D9248

===============================================
Testing merge involving change to the exec flag
===============================================

#require execbit


Initial setup
==============


  $ hg init base-repo
  $ cd base-repo
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ touch b
  $ hg add a b
  $ hg commit -m "initial commit"
  $ cd ..

  $ hg init base-exec
  $ cd base-exec
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ chmod +x a
  $ touch b
  $ hg add a b
  $ hg commit -m "initial commit"
  $ cd ..

Testing merging mode change
===========================

Adding the flag
---------------

setup

Change on one side, executable bit on the other

  $ hg clone base-repo simple-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd simple-merge-repo
  $ chmod +x a
  $ hg ci -m "make a executable, no change"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg commit -m "edit end of file"
  created new head

merge them (from the update side)

  $ hg merge 'desc("make a executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 'desc("edit end of file")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] || echo "executable bit lost"


  $ cd ..


Removing the flag
-----------------

Change on one side, executable bit on the other

  $ hg clone base-exec simple-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd simple-merge-repo-removal
  $ chmod -x a
  $ hg ci -m "make a non-executable, no change"
  $ [ -x a ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg commit -m "edit end of file"
  created new head

merge them (from the update side)

  $ hg merge 'desc("make a non-executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 'desc("edit end of file")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] && echo "executable bit not removed"
  [1]


  $ cd ..

Testing merging mode change with rename
=======================================

Adding the flag
---------------

  $ hg clone base-repo rename-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename-merge-repo

make "a" executable on one side

  $ chmod +x a
  $ hg status
  M a
  $ hg ci -m "make a executable"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ hg ci -m "rename a to z"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a executable")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] || echo "executable bit lost"


  $ cd ..

Removing the flag
-----------------

  $ hg clone base-exec rename-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename-merge-repo-removal

make "a" non-executable on one side

  $ chmod -x a
  $ hg status
  M a
  $ hg ci -m "make a non-executable"
  $ [ -x a ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ hg ci -m "rename a to z"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a non-executable")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] && echo "executable bit not removed"
  [1]


  $ cd ..


Testing merging mode change with rename + modification on both side
===================================================================


Adding the flag
---------------

  $ hg clone base-repo rename+mod-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename+mod-merge-repo

make "a" executable on one side

  $ chmod +x a
  $ cat << EOF > a
  > 1
  > x
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ hg status
  M a
  $ hg ci -m "make a executable, and change start"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ cat << EOF > z
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg ci -m "rename a to z, and change end"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a executable")'
  merging z and a to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  merging a and z to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] || echo "executable bit lost"

  $ cd ..

Removing the flag
-----------------

  $ hg clone base-exec rename+mod-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename+mod-merge-repo-removal

make "a" non-executable on one side

  $ chmod -x a
  $ cat << EOF > a
  > 1
  > x
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ hg status
  M a
  $ hg ci -m "make a non-executable, and change start"
  $ [ -x z ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ cat << EOF > z
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg ci -m "rename a to z, and change end"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a non-executable")'
  merging z and a to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  merging a and z to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

  $ cd ..