view tests/test-narrow-share.t @ 45761:341e014fe0fb stable

repoview: only pin obsolete wdir parents while there are unresolved conflicts

I noticed after doing an update from an obsolete revision with a dirty wdir that
the obsolete commit stayed visible for no obvious reason.  It was decided in
85b03b1e4715 not to clear mergestate once all of the conflicts were resolved, in
order to allow re-resolving.  Since the point of pinning the obsolete parents
was to allow resolving in the first place (aaeccdb6e654), it makes sense to also
gate it on whether or not there are any remaining files to resolve.  This might
result in pinning again if files are marked unresolved again, but that seems
reasonable, given that it still solves the original issue.

Note that this isn't purely cosmetic- pushing with a pinned obsolete revision is
likely to cause complaints about pushing multiple heads or other unexpected
errors.  So the faster it comes out of that state, the better.

Differential Revision: https://phab.mercurial-scm.org/D9248

#testcases flat tree
#testcases safe normal

#if safe
  $ echo "[format]"         >> $HGRCPATH
  $ echo "exp-share-safe = True" >> $HGRCPATH
#endif

  $ . "$TESTDIR/narrow-library.sh"

#if tree
  $ cat << EOF >> $HGRCPATH
  > [experimental]
  > treemanifest = 1
  > EOF
#endif

  $ cat << EOF >> $HGRCPATH
  > [extensions]
  > share =
  > EOF

  $ hg init remote
  $ cd remote
  $ for x in `$TESTDIR/seq.py 0 10`
  > do
  >   mkdir d$x
  >   echo $x > d$x/f
  >   hg add d$x/f
  >   hg commit -m "add d$x/f"
  > done
  $ cd ..

  $ hg clone --narrow ssh://user@dummy/remote main -q \
  > --include d1 --include d3 --include d5 --include d7

Ignore file called "ignored"
  $ echo ignored > main/.hgignore

  $ hg share main share
  updating working directory
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R share tracked
  I path:d1
  I path:d3
  I path:d5
  I path:d7
  $ hg -R share files
  share/d1/f
  share/d3/f
  share/d5/f
  share/d7/f

Narrow the share and check that the main repo's working copy gets updated

# Make sure the files that are supposed to be known-clean get their timestamps set in the dirstate
  $ sleep 2
  $ hg -R main st
  $ hg -R main debugdirstate --no-dates
  n 644          2 set                 d1/f
  n 644          2 set                 d3/f
  n 644          2 set                 d5/f
  n 644          2 set                 d7/f
# Make d3/f dirty
  $ echo x >> main/d3/f
  $ echo y >> main/d3/g
  $ touch main/d3/ignored
  $ touch main/d3/untracked
  $ hg add main/d3/g
  $ hg -R main st
  M d3/f
  A d3/g
  ? d3/untracked
# Make d5/f not match the dirstate timestamp even though it's clean
  $ sleep 2
  $ hg -R main st
  M d3/f
  A d3/g
  ? d3/untracked
  $ hg -R main debugdirstate --no-dates
  n 644          2 set                 d1/f
  n 644          2 set                 d3/f
  a   0         -1 unset               d3/g
  n 644          2 set                 d5/f
  n 644          2 set                 d7/f
  $ touch main/d5/f
  $ hg -R share tracked --removeinclude d1 --removeinclude d3 --removeinclude d5
  comparing with ssh://user@dummy/remote
  searching for changes
  looking for local changes to affected paths
  deleting data/d1/f.i
  deleting data/d3/f.i
  deleting data/d5/f.i
  deleting meta/d1/00manifest.i (tree !)
  deleting meta/d3/00manifest.i (tree !)
  deleting meta/d5/00manifest.i (tree !)
  $ hg -R main tracked
  I path:d7
  $ hg -R main files
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [255]
  $ hg -R main tracked --update-working-copy
  not deleting possibly dirty file d3/f
  not deleting possibly dirty file d3/g
  not deleting possibly dirty file d5/f
  not deleting unknown file d3/untracked
  not deleting ignored file d3/ignored
# d1/f, d3/f, d3/g and d5/f should no longer be reported
  $ hg -R main files
  main/d7/f
# d1/f should no longer be there, d3/f should be since it was dirty, d3/g should be there since
# it was added, and d5/f should be since we couldn't be sure it was clean
  $ find main/d* -type f | sort
  main/d3/f
  main/d3/g
  main/d3/ignored
  main/d3/untracked
  main/d5/f
  main/d7/f

Widen the share and check that the main repo's working copy gets updated

  $ hg -R share tracked --addinclude d1 --addinclude d3 -q
  $ hg -R share tracked
  I path:d1
  I path:d3
  I path:d7
  $ hg -R share files
  share/d1/f
  share/d3/f
  share/d7/f
  $ hg -R main tracked
  I path:d1
  I path:d3
  I path:d7
  $ hg -R main files
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [255]
  $ hg -R main tracked --update-working-copy
# d1/f, d3/f should be back
  $ hg -R main files
  main/d1/f
  main/d3/f
  main/d7/f
# d3/f should be modified (not clobbered by the widening), and d3/g should be untracked
  $ hg -R main st --all
  M d3/f
  ? d3/g
  ? d3/untracked
  I d3/ignored
  C d1/f
  C d7/f

We should also be able to unshare without breaking everything:

  $ hg share main share-unshare
  updating working directory
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd share-unshare
  $ hg unshare
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 11 changesets with 3 changes to 3 files
  $ cd ..

Dirstate should be left alone when upgrading from version of hg that didn't support narrow+share

  $ hg share main share-upgrade
  updating working directory
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd share-upgrade
  $ echo x >> d1/f
  $ echo y >> d3/g
  $ hg add d3/g
  $ hg rm d7/f
  $ hg st
  M d1/f
  A d3/g
  R d7/f
Make it look like a repo from before narrow+share was supported
  $ rm .hg/narrowspec.dirstate
  $ hg ci -Am test
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [255]
  $ hg tracked --update-working-copy
  $ hg st
  M d1/f
  A d3/g
  R d7/f
  $ cd ..