view tests/test-sparse-profiles.t @ 45761:341e014fe0fb stable

repoview: only pin obsolete wdir parents while there are unresolved conflicts

I noticed after doing an update from an obsolete revision with a dirty wdir that
the obsolete commit stayed visible for no obvious reason.  It was decided in
85b03b1e4715 not to clear mergestate once all of the conflicts were resolved, in
order to allow re-resolving.  Since the point of pinning the obsolete parents
was to allow resolving in the first place (aaeccdb6e654), it makes sense to also
gate it on whether or not there are any remaining files to resolve.  This might
result in pinning again if files are marked unresolved again, but that seems
reasonable, given that it still solves the original issue.

Note that this isn't purely cosmetic- pushing with a pinned obsolete revision is
likely to cause complaints about pushing multiple heads or other unexpected
errors.  So the faster it comes out of that state, the better.

Differential Revision: https://phab.mercurial-scm.org/D9248

test sparse

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > purge=
  > strip=
  > rebase=
  > EOF

Config file without [section] is rejected

  $ cat > bad.sparse <<EOF
  > *.html
  > EOF

  $ hg debugsparse --import-rules bad.sparse
  abort: sparse config entry outside of section: *.html
  (add an [include] or [exclude] line to declare the entry type)
  [255]
  $ rm bad.sparse

  $ echo a > index.html
  $ echo x > data.py
  $ echo z > readme.txt
  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > EOF
  $ hg ci -Aqm 'initial'

  $ hg debugsparse --include '*.sparse'

Verify enabling a single profile works

  $ hg debugsparse --enable-profile webpage.sparse
  $ ls -A
  .hg
  backend.sparse
  index.html
  webpage.sparse

Verify enabling two profiles works

  $ hg debugsparse --enable-profile backend.sparse
  $ ls -A
  .hg
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify disabling a profile works

  $ hg debugsparse --disable-profile webpage.sparse
  $ ls -A
  .hg
  backend.sparse
  data.py
  webpage.sparse

Verify that a profile is updated across multiple commits

  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > *.txt
  > EOF

  $ echo foo >> data.py

  $ hg ci -m 'edit profile'
  $ ls -A
  .hg
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg up -q 0
  $ ls -A
  .hg
  backend.sparse
  data.py
  webpage.sparse

  $ hg up -q 1
  $ ls -A
  .hg
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

Introduce a conflicting .hgsparse change

  $ hg up -q 0
  $ cat > backend.sparse <<EOF
  > # Different backend sparse profile
  > [include]
  > *.html
  > EOF
  $ echo bar >> data.py

  $ hg ci -qAm "edit profile other"
  $ ls -A
  .hg
  backend.sparse
  index.html
  webpage.sparse

Verify conflicting merge pulls in the conflicting changes

  $ hg merge 1
  temporarily included 2 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 2 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ rm *.orig
  $ ls -A
  .hg
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving the merge removes the temporarily unioned files

  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)

  $ hg ci -qAm "merge profiles"
  $ ls -A
  .hg
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Verify stripping refreshes dirstate

  $ hg strip -q -r .
  $ ls -A
  .hg
  backend.sparse
  index.html
  webpage.sparse

Verify rebase conflicts pulls in the conflicting changes

  $ hg up -q 1
  $ ls -A
  .hg
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg rebase -d 2
  rebasing 1:a2b1de640a62 "edit profile"
  temporarily included 2 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see 'hg resolve', then 'hg rebase --continue')
  [1]
  $ rm *.orig
  $ ls -A
  .hg
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving conflict removes the temporary files

  $ cat > backend.sparse <<EOF
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)
  continue: hg rebase --continue

  $ hg rebase -q --continue
  $ ls -A
  .hg
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Test checking out a commit that does not contain the sparse profile. The
warning message can be suppressed by setting missingwarning = false in
[sparse] section of your config:

  $ hg debugsparse --reset
  $ hg rm *.sparse
  $ hg commit -m "delete profiles"
  $ hg up -q ".^"
  $ hg debugsparse --enable-profile backend.sparse
  $ ls -A
  .hg
  index.html
  readme.txt
  $ hg up tip | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ ls -A
  .hg
  data.py
  index.html
  readme.txt
  $ hg debugsparse --disable-profile backend.sparse | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ cat >> .hg/hgrc <<EOF
  > [sparse]
  > missingwarning = false
  > EOF
  $ hg debugsparse --enable-profile backend.sparse

  $ cd ..

#if unix-permissions

Test file permissions changing across a sparse profile change
  $ hg init sparseperm
  $ cd sparseperm
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF
  $ touch a b
  $ cat > .hgsparse <<EOF
  > [include]
  > a
  > EOF
  $ hg commit -Aqm 'initial'
  $ chmod a+x b
  $ hg commit -qm 'make executable'
  $ cat >> .hgsparse <<EOF
  > b
  > EOF
  $ hg commit -qm 'update profile'
  $ hg up -q 0
  $ hg debugsparse --enable-profile .hgsparse
  $ hg up -q 2
  $ ls -l b
  -rwxr-xr-x* b (glob)

#endif