view tests/test-mq-qrefresh-replace-log-message.t @ 23976:344939126579 stable

largefiles: don't interfere with logging normal files

The previous code was adding standin files to the matcher's file list when
neither the standin file nor the original existed in the context.  Somehow, this
was confusing the logging code into behaving differently from when the extension
wasn't loaded.

It seems that this was an attempt to support naming a directory that only
contains largefiles, as a test fails if the else clause is dropped entirely.
Therefore, only append the "standin" if it is a directory.  This was found by
running the test suite with --config extensions.largefiles=.

The first added test used to log an additional cset that wasn't logged normally.
The only relation it had to file 'a' is that 'a' was the source of a move, but
it isn't clear why having '.hglf/a' in the list causes this change:

    @@ -47,6 +47,11 @@

     Make sure largefiles doesn't interfere with logging a regular file
       $ hg log a --config extensions.largefiles=
    +  changeset:   3:2ca5ba701980
    +  user:        test
    +  date:        Thu Jan 01 00:00:04 1970 +0000
    +  summary:     d
    +
       changeset:   0:9161b9aeaf16
       user:        test
       date:        Thu Jan 01 00:00:01 1970 +0000

The second added test used to complain about a file not being in the parent
revision:

    @@ -1638,10 +1643,8 @@

     Ensure that largefiles doesn't intefere with following a normal file
       $ hg  --config extensions.largefiles= log -f d -T '{desc}' -G
    -  @  c
    -  |
    -  o  a
    -
    +  abort: cannot follow file not in parent revision: ".hglf/d"
    +  [255]
       $ hg log -f d/a -T '{desc}' -G
       @  c
       |

Note that there is still something fishy with the largefiles code, because when
using a glob pattern like this:

    $ hg log 'glob:sub/*'

the pattern list would contain '.hglf/glob:sub/*'.  None of the tests show this
(this test lives in test-largefiles.t at 1349), it was just something that I
noticed when the code was loaded up with print statements.

Environment setup for MQ

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ hg init
  $ hg qinit

Should fail if no patches applied
(this tests also that editor is not invoked if '--edit' is not
specified)

  $ hg qrefresh
  no patches applied
  [1]
  $ hg qrefresh -e
  no patches applied
  [1]
  $ hg qnew -m "First commit message" first-patch
  $ echo aaaa > file
  $ hg add file
  $ HGEDITOR=cat hg qrefresh

Should display 'First commit message'

  $ hg log -l1 --template "{desc}\n"
  First commit message

Testing changing message with -m
(this tests also that '--edit' can be used with '--message', and
that '[committemplate] changeset' definition and commit log specific
template keyword 'extramsg' work well)

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > listupfiles = {file_adds %
  >    "HG: added {file}\n"     }{file_mods %
  >    "HG: changed {file}\n"   }{file_dels %
  >    "HG: removed {file}\n"   }{if(files, "",
  >    "HG: no files changed\n")}
  > 
  > changeset = HG: this is customized commit template
  >     {desc}\n\n
  >     HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  >     HG: {extramsg}
  >     HG: --
  >     HG: user: {author}
  >     HG: branch '{branch}'\n{listupfiles}
  > EOF

  $ echo bbbb > file
  $ HGEDITOR=cat hg qrefresh -m "Second commit message" -e
  HG: this is customized commit template
  Second commit message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file

  $ cat >> .hg/hgrc <<EOF
  > # disable customizing for subsequent tests
  > [committemplate]
  > changeset =
  > EOF

Should display 'Second commit message'

  $ hg log -l1 --template "{desc}\n"
  Second commit message

Testing changing message with -l

  $ echo "Third commit message" > logfile
  $ echo " This is the 3rd log message" >> logfile
  $ echo bbbb > file
  $ hg qrefresh -l logfile

Should display 'Third commit message\\\n This is the 3rd log message'

  $ hg log -l1 --template "{desc}\n"
  Third commit message
   This is the 3rd log message

Testing changing message with -l-

  $ hg qnew -m "First commit message" second-patch
  $ echo aaaa > file2
  $ hg add file2
  $ echo bbbb > file2
  $ (echo "Fifth commit message"; echo " This is the 5th log message") | hg qrefresh -l-

Should display 'Fifth commit message\\\n This is the 5th log message'

  $ hg log -l1 --template "{desc}\n"
  Fifth commit message
   This is the 5th log message

Test saving last-message.txt:

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > (echo; echo "test saving last-message.txt") >> \$1
  > EOF

  $ cat > $TESTTMP/commitfailure.py <<EOF
  > from mercurial import util
  > def reposetup(ui, repo):
  >     class commitfailure(repo.__class__):
  >         def commit(self, *args, **kwargs):
  >             raise util.Abort('emulating unexpected abort')
  >     repo.__class__ = commitfailure
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs before editor invocation
  > commitfailure = $TESTTMP/commitfailure.py
  > EOF

  $ hg qapplied
  first-patch
  second-patch
  $ hg tip --template "{files}\n"
  file2

(test that editor is not invoked before transaction starting)

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  refresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: emulating unexpected abort
  [255]
  $ test -f .hg/last-message.txt
  [1]

(reset applied patches and directory status)

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > commitfailure = !
  > EOF

  $ hg qapplied
  first-patch
  $ hg status -A file2
  ? file2
  $ rm file2
  $ hg qpush -q second-patch
  now at: second-patch

(test that editor is invoked and commit message is saved into
"last-message.txt")

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > # this failure occurs after editor invocation
  > pretxncommit.unexpectedabort = false
  > EOF

  $ rm -f .hg/last-message.txt
  $ hg status --rev "second-patch^1" -arm
  A file2
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  ==== before editing
  Fifth commit message
   This is the 5th log message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file2
  ====
  transaction abort!
  rollback completed
  note: commit message saved in .hg/last-message.txt
  refresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]
  $ cat .hg/last-message.txt
  Fifth commit message
   This is the 5th log message
  
  
  
  test saving last-message.txt