Mercurial > hg
view tests/test-pull-branch.t @ 23976:344939126579 stable
largefiles: don't interfere with logging normal files
The previous code was adding standin files to the matcher's file list when
neither the standin file nor the original existed in the context. Somehow, this
was confusing the logging code into behaving differently from when the extension
wasn't loaded.
It seems that this was an attempt to support naming a directory that only
contains largefiles, as a test fails if the else clause is dropped entirely.
Therefore, only append the "standin" if it is a directory. This was found by
running the test suite with --config extensions.largefiles=.
The first added test used to log an additional cset that wasn't logged normally.
The only relation it had to file 'a' is that 'a' was the source of a move, but
it isn't clear why having '.hglf/a' in the list causes this change:
@@ -47,6 +47,11 @@
Make sure largefiles doesn't interfere with logging a regular file
$ hg log a --config extensions.largefiles=
+ changeset: 3:2ca5ba701980
+ user: test
+ date: Thu Jan 01 00:00:04 1970 +0000
+ summary: d
+
changeset: 0:9161b9aeaf16
user: test
date: Thu Jan 01 00:00:01 1970 +0000
The second added test used to complain about a file not being in the parent
revision:
@@ -1638,10 +1643,8 @@
Ensure that largefiles doesn't intefere with following a normal file
$ hg --config extensions.largefiles= log -f d -T '{desc}' -G
- @ c
- |
- o a
-
+ abort: cannot follow file not in parent revision: ".hglf/d"
+ [255]
$ hg log -f d/a -T '{desc}' -G
@ c
|
Note that there is still something fishy with the largefiles code, because when
using a glob pattern like this:
$ hg log 'glob:sub/*'
the pattern list would contain '.hglf/glob:sub/*'. None of the tests show this
(this test lives in test-largefiles.t at 1349), it was just something that I
noticed when the code was loaded up with print statements.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Fri, 30 Jan 2015 20:44:11 -0500 |
parents | 4f8054d3171b |
children | 701df761aa94 |
line wrap: on
line source
$ hg init t $ cd t $ echo 1 > foo $ hg ci -Am1 # 0 adding foo $ hg branch branchA marked working directory as branch branchA (branches are permanent and global, did you want a bookmark?) $ echo a1 > foo $ hg ci -ma1 # 1 $ cd .. $ hg init tt $ cd tt $ hg pull ../t pulling from ../t requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files (run 'hg update' to get a working copy) $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd ../t $ echo a2 > foo $ hg ci -ma2 # 2 Create branch B: $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branchB marked working directory as branch branchB (branches are permanent and global, did you want a bookmark?) $ echo b1 > foo $ hg ci -mb1 # 3 $ cd ../tt A new branch is there $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files (+1 heads) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Develop both branches: $ cd ../t $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a3 > foo $ hg ci -ma3 # 4 $ hg up branchB 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b2 > foo $ hg ci -mb2 # 5 $ cd ../tt Should succeed, no new heads: $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Add a head on other branch: $ cd ../t $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a4 > foo $ hg ci -ma4 # 6 $ hg up branchB 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b3.1 > foo $ hg ci -m b3.1 # 7 $ hg up 5 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b3.2 > foo $ hg ci -m b3.2 # 8 created new head $ cd ../tt Should succeed because there is only one head on our branch: $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 1 files (+1 heads) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd ../t $ hg up -C branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a5.1 > foo $ hg ci -ma5.1 # 9 $ hg up 6 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a5.2 > foo $ hg ci -ma5.2 # 10 created new head $ hg up 7 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b4.1 > foo $ hg ci -m b4.1 # 11 $ hg up -C 8 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b4.2 > foo $ hg ci -m b4.2 # 12 $ cd ../tt $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 4 changesets with 4 changes to 1 files (+1 heads) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Make changes on new branch on tt $ hg up 6 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branchC marked working directory as branch branchC (branches are permanent and global, did you want a bookmark?) $ echo b1 > bar $ hg ci -Am "commit on branchC on tt" adding bar Make changes on default branch on t $ cd ../t $ hg up -C default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar $ hg ci -Am "commit on default on t" adding bar Pull branchC from tt $ hg pull ../tt pulling from ../tt searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) (run 'hg heads' to see heads) Make changes on default and branchC on tt $ cd ../tt $ hg pull ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) (run 'hg heads' to see heads) $ hg up -C default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar1 $ hg ci -Am "commit on default on tt" adding bar1 $ hg up branchC 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo a1 > bar2 $ hg ci -Am "commit on branchC on tt" adding bar2 Make changes on default and branchC on t $ cd ../t $ hg up default 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar3 $ hg ci -Am "commit on default on t" adding bar3 $ hg up branchC 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo a1 > bar4 $ hg ci -Am "commit on branchC on tt" adding bar4 Pull from tt $ hg pull ../tt pulling from ../tt searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+2 heads) (run 'hg heads .' to see heads, 'hg merge' to merge) $ cd ..