view tests/test-remove.t @ 23976:344939126579 stable

largefiles: don't interfere with logging normal files

The previous code was adding standin files to the matcher's file list when
neither the standin file nor the original existed in the context.  Somehow, this
was confusing the logging code into behaving differently from when the extension
wasn't loaded.

It seems that this was an attempt to support naming a directory that only
contains largefiles, as a test fails if the else clause is dropped entirely.
Therefore, only append the "standin" if it is a directory.  This was found by
running the test suite with --config extensions.largefiles=.

The first added test used to log an additional cset that wasn't logged normally.
The only relation it had to file 'a' is that 'a' was the source of a move, but
it isn't clear why having '.hglf/a' in the list causes this change:

    @@ -47,6 +47,11 @@

     Make sure largefiles doesn't interfere with logging a regular file
       $ hg log a --config extensions.largefiles=
    +  changeset:   3:2ca5ba701980
    +  user:        test
    +  date:        Thu Jan 01 00:00:04 1970 +0000
    +  summary:     d
    +
       changeset:   0:9161b9aeaf16
       user:        test
       date:        Thu Jan 01 00:00:01 1970 +0000

The second added test used to complain about a file not being in the parent
revision:

    @@ -1638,10 +1643,8 @@

     Ensure that largefiles doesn't intefere with following a normal file
       $ hg  --config extensions.largefiles= log -f d -T '{desc}' -G
    -  @  c
    -  |
    -  o  a
    -
    +  abort: cannot follow file not in parent revision: ".hglf/d"
    +  [255]
       $ hg log -f d/a -T '{desc}' -G
       @  c
       |

Note that there is still something fishy with the largefiles code, because when
using a glob pattern like this:

    $ hg log 'glob:sub/*'

the pattern list would contain '.hglf/glob:sub/*'.  None of the tests show this
(this test lives in test-largefiles.t at 1349), it was just something that I
noticed when the code was loaded up with print statements.

  $ remove() {
  >     hg rm $@
  >     echo "exit code: $?"
  >     hg st
  >     # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
  >     find . -name .hg -prune -o -type f -print | sort
  >     hg up -C
  > }

  $ hg init a
  $ cd a
  $ echo a > foo

file not managed

  $ remove foo
  not removing foo: file is untracked
  exit code: 1
  ? foo
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg add foo
  $ hg commit -m1

the table cases
00 state added, options none

  $ echo b > bar
  $ hg add bar
  $ remove bar
  not removing bar: file has been marked for add (use forget to undo)
  exit code: 1
  A bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

01 state clean, options none

  $ remove foo
  exit code: 0
  R foo
  ? bar
  ./bar
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

02 state modified, options none

  $ echo b >> foo
  $ remove foo
  not removing foo: file is modified (use -f to force removal)
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

03 state missing, options none

  $ rm foo
  $ remove foo
  exit code: 0
  R foo
  ? bar
  ./bar
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

10 state added, options -f

  $ echo b > bar
  $ hg add bar
  $ remove -f bar
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

11 state clean, options -f

  $ remove -f foo
  exit code: 0
  R foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

12 state modified, options -f

  $ echo b >> foo
  $ remove -f foo
  exit code: 0
  R foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

13 state missing, options -f

  $ rm foo
  $ remove -f foo
  exit code: 0
  R foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

20 state added, options -A

  $ echo b > bar
  $ hg add bar
  $ remove -A bar
  not removing bar: file still exists
  exit code: 1
  A bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

21 state clean, options -A

  $ remove -A foo
  not removing foo: file still exists
  exit code: 1
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

22 state modified, options -A

  $ echo b >> foo
  $ remove -A foo
  not removing foo: file still exists
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

23 state missing, options -A

  $ rm foo
  $ remove -A foo
  exit code: 0
  R foo
  ? bar
  ./bar
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

30 state added, options -Af

  $ echo b > bar
  $ hg add bar
  $ remove -Af bar
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

31 state clean, options -Af

  $ remove -Af foo
  exit code: 0
  R foo
  ./foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

32 state modified, options -Af

  $ echo b >> foo
  $ remove -Af foo
  exit code: 0
  R foo
  ./foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

33 state missing, options -Af

  $ rm foo
  $ remove -Af foo
  exit code: 0
  R foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

test some directory stuff

  $ mkdir test
  $ echo a > test/foo
  $ echo b > test/bar
  $ hg ci -Am2
  adding test/bar
  adding test/foo

dir, options none

  $ rm test/bar
  $ remove test
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -f

  $ rm test/bar
  $ remove -f test
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -A

  $ rm test/bar
  $ remove -A test
  not removing test/foo: file still exists (glob)
  removing test/bar (glob)
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Af

  $ rm test/bar
  $ remove -Af test
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  ./test/foo
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

test remove dropping empty trees (issue1861)

  $ mkdir -p issue1861/b/c
  $ echo x > issue1861/x
  $ echo y > issue1861/b/c/y
  $ hg ci -Am add
  adding issue1861/b/c/y
  adding issue1861/x
  $ hg rm issue1861/b
  removing issue1861/b/c/y (glob)
  $ hg ci -m remove
  $ ls issue1861
  x

test that commit does not crash if the user removes a newly added file

  $ touch f1
  $ hg add f1
  $ rm f1
  $ hg ci -A -mx
  removing f1
  nothing changed
  [1]

handling of untracked directories and missing files

  $ mkdir d1
  $ echo a > d1/a
  $ hg rm --after d1
  not removing d1: no tracked files
  [1]
  $ hg add d1/a
  $ rm d1/a
  $ hg rm --after d1
  removing d1/a (glob)
#if windows
  $ hg rm --after nosuch
  nosuch: * (glob)
  [1]
#else
  $ hg rm --after nosuch
  nosuch: No such file or directory
  [1]
#endif