view tests/test-treediscovery-legacy.t @ 23976:344939126579 stable

largefiles: don't interfere with logging normal files

The previous code was adding standin files to the matcher's file list when
neither the standin file nor the original existed in the context.  Somehow, this
was confusing the logging code into behaving differently from when the extension
wasn't loaded.

It seems that this was an attempt to support naming a directory that only
contains largefiles, as a test fails if the else clause is dropped entirely.
Therefore, only append the "standin" if it is a directory.  This was found by
running the test suite with --config extensions.largefiles=.

The first added test used to log an additional cset that wasn't logged normally.
The only relation it had to file 'a' is that 'a' was the source of a move, but
it isn't clear why having '.hglf/a' in the list causes this change:

    @@ -47,6 +47,11 @@

     Make sure largefiles doesn't interfere with logging a regular file
       $ hg log a --config extensions.largefiles=
    +  changeset:   3:2ca5ba701980
    +  user:        test
    +  date:        Thu Jan 01 00:00:04 1970 +0000
    +  summary:     d
    +
       changeset:   0:9161b9aeaf16
       user:        test
       date:        Thu Jan 01 00:00:01 1970 +0000

The second added test used to complain about a file not being in the parent
revision:

    @@ -1638,10 +1643,8 @@

     Ensure that largefiles doesn't intefere with following a normal file
       $ hg  --config extensions.largefiles= log -f d -T '{desc}' -G
    -  @  c
    -  |
    -  o  a
    -
    +  abort: cannot follow file not in parent revision: ".hglf/d"
    +  [255]
       $ hg log -f d/a -T '{desc}' -G
       @  c
       |

Note that there is still something fishy with the largefiles code, because when
using a glob pattern like this:

    $ hg log 'glob:sub/*'

the pattern list would contain '.hglf/glob:sub/*'.  None of the tests show this
(this test lives in test-largefiles.t at 1349), it was just something that I
noticed when the code was loaded up with print statements.

#require killdaemons

Tests discovery against servers without getbundle support:

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > logtemplate="{rev} {node|short}: {desc} {branches}\n"
  > EOF
  $ cp $HGRCPATH $HGRCPATH-withcap

  $ CAP="getbundle known changegroupsubset"
  $ . "$TESTDIR/notcapable"
  $ cp $HGRCPATH $HGRCPATH-nocap
  $ cp $HGRCPATH-withcap $HGRCPATH

Prep for test server without branchmap support

  $ CAP="branchmap"
  $ . "$TESTDIR/notcapable"
  $ cp $HGRCPATH $HGRCPATH-nocap-branchmap
  $ cp $HGRCPATH-withcap $HGRCPATH

Setup HTTP server control:

  $ remote=http://localhost:$HGPORT/
  $ export remote
  $ tstart() {
  >   echo '[web]' > $1/.hg/hgrc
  >   echo 'push_ssl = false' >> $1/.hg/hgrc
  >   echo 'allow_push = *' >> $1/.hg/hgrc
  >   cp $HGRCPATH-nocap $HGRCPATH
  >   hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log
  >   cat hg.pid >> $DAEMON_PIDS
  > }
  $ tstop() {
  >   "$TESTDIR/killdaemons.py" $DAEMON_PIDS
  >   cp $HGRCPATH-withcap $HGRCPATH
  > }

Both are empty:

  $ hg init empty1
  $ hg init empty2
  $ tstart empty2
  $ hg incoming -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg outgoing -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull -R empty1 $remote
  pulling from http://localhost:$HGPORT/
  no changes found
  $ hg push -R empty1 $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ tstop

Base repo:

  $ hg init main
  $ cd main
  $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
  $ hg log -G
  o  11 a19bfa7e7328: r11 both
  |
  o  10 8b6bad1512e1: r10 both
  |
  o    9 025829e08038: r9 both
  |\
  | o  8 d8f638ac69e9: r8 name2
  | |
  | o  7 b6b4d315a2ac: r7 name2
  | |
  | o  6 6c6f5d5f3c11: r6 name2
  | |
  | o  5 70314b29987d: r5 name2
  | |
  o |  4 e71dbbc70e03: r4 name1
  | |
  o |  3 2c8d5d5ec612: r3 name1
  | |
  o |  2 a7892891da29: r2 name1
  |/
  o  1 0019a3b924fd: r1
  |
  o  0 d57206cc072a: r0
  
  $ cd ..
  $ tstart main

Full clone:

  $ hg clone main full
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd full
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is empty:

  $ cd empty1
  $ hg incoming $remote --rev name1
  comparing with http://localhost:$HGPORT/
  abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
  [255]
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 12 changesets with 24 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is subset:

  $ cp $HGRCPATH-withcap $HGRCPATH
  $ hg clone main subset --rev name2 ; cd subset
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cp $HGRCPATH-nocap $HGRCPATH
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Remote is empty:

  $ tstop ; tstart empty2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 12 changesets with 24 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is superset:

  $ tstop
  $ hg clone main subset2 --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ tstart subset2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: push creates new remote branches: both, name1!
  (use 'hg push --new-branch' to create new remote branches)
  [255]
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 6 changesets with 12 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Partial pull:

  $ tstop ; tstart main
  $ hg clone $remote partial --rev name2
  abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
  [255]
  $ hg init partial; cd partial
  $ hg incoming $remote --rev name2
  comparing with http://localhost:$HGPORT/
  abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
  [255]
  $ hg pull $remote --rev name2
  pulling from http://localhost:$HGPORT/
  abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
  [255]
  $ cd ..

  $ tstop

Exercise pushing to server without branchmap capability

  $ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap
  $ hg init rlocal
  $ cd rlocal
  $ echo A > A
  $ hg ci -Am A
  adding A
  $ cd ..
  $ hg clone rlocal rremote
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rlocal
  $ echo B > B
  $ hg ci -Am B
  adding B
  $ cd ..
  $ tstart rremote

  $ cd rlocal
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  1 27547f69f254: B 
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

  $ tstop