Mercurial > hg
view tests/test-treediscovery.t @ 23976:344939126579 stable
largefiles: don't interfere with logging normal files
The previous code was adding standin files to the matcher's file list when
neither the standin file nor the original existed in the context. Somehow, this
was confusing the logging code into behaving differently from when the extension
wasn't loaded.
It seems that this was an attempt to support naming a directory that only
contains largefiles, as a test fails if the else clause is dropped entirely.
Therefore, only append the "standin" if it is a directory. This was found by
running the test suite with --config extensions.largefiles=.
The first added test used to log an additional cset that wasn't logged normally.
The only relation it had to file 'a' is that 'a' was the source of a move, but
it isn't clear why having '.hglf/a' in the list causes this change:
@@ -47,6 +47,11 @@
Make sure largefiles doesn't interfere with logging a regular file
$ hg log a --config extensions.largefiles=
+ changeset: 3:2ca5ba701980
+ user: test
+ date: Thu Jan 01 00:00:04 1970 +0000
+ summary: d
+
changeset: 0:9161b9aeaf16
user: test
date: Thu Jan 01 00:00:01 1970 +0000
The second added test used to complain about a file not being in the parent
revision:
@@ -1638,10 +1643,8 @@
Ensure that largefiles doesn't intefere with following a normal file
$ hg --config extensions.largefiles= log -f d -T '{desc}' -G
- @ c
- |
- o a
-
+ abort: cannot follow file not in parent revision: ".hglf/d"
+ [255]
$ hg log -f d/a -T '{desc}' -G
@ c
|
Note that there is still something fishy with the largefiles code, because when
using a glob pattern like this:
$ hg log 'glob:sub/*'
the pattern list would contain '.hglf/glob:sub/*'. None of the tests show this
(this test lives in test-largefiles.t at 1349), it was just something that I
noticed when the code was loaded up with print statements.
| author | Matt Harbison <matt_harbison@yahoo.com> |
|---|---|
| date | Fri, 30 Jan 2015 20:44:11 -0500 |
| parents | 3b7088a5c64c |
| children | 249c7e922d1a |
line wrap: on
line source
#require killdaemons Tests discovery against servers without getbundle support: $ CAP=getbundle $ . "$TESTDIR/notcapable" $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > "$TESTDIR/killdaemons.py" $DAEMON_PIDS > [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log > rm access.log errors.log > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Remote is empty: $ tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Local is superset: $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Partial pull: $ tstart main $ hg clone $remote partial --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg pull $remote --rev name1 pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ cd .. $ tstop Both have new stuff in new named branches: $ hg clone main repo1a --rev name1 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev name2 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop $ tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Both have new stuff in existing named branches: $ rm -r repo1a repo1b repo2a repo2b $ hg clone main repo1a --rev 3 --rev 8 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev 4 --rev 7 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop $ tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files (run 'hg update' to get a working copy) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop show "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 -