Mercurial > hg
view Makefile @ 27568:34b01a51bd42
parents: correct help revset replacements
Implementing `hg parents -r REV FILE` correctly is hard.
The output can be 0, 1, or 2 revs.
First, you can't use parents(), because it sorts its output...
Consider:
echo $a
echo par@rev: `hg log -r "parents($a)" -q`
echo p12@rev: `hg log -r "p1($a)+p2($a)" -q`
echo parents: `hg parents -q -r $a`
(Merge 1 into 0)
3
par@rev: 0:d9612eafe8ec 1:070fe4290d06
p12@rev: 0:d9612eafe8ec 1:070fe4290d06
parents: 0:d9612eafe8ec 1:070fe4290d06
(Merge 4 into 5)
6
par@rev: 4:db73392995c3 5:c26e7dd67644
p12@rev: 5:c26e7dd67644 4:db73392995c3
parents: 5:c26e7dd67644 4:db73392995c3
(Merge 7 into 8)
9
par@rev: 7:d84f47462f70 8:9597bcab36e0
p12@rev: 8:9597bcab36e0 7:d84f47462f70
parents: 8:9597bcab36e0 7:d84f47462f70
You also can't use parents or/p1/p2 alone with a set, as in:
-r "parents(::REV and file(FILE))"
-r "parents(::REV - REV and file(FILE))"
... because each will return all parents for each candidate revision,
and the :: gives too many candidates.
Thus, we need a max and a p1/p2.
Also, anything of this form:
max(::REV - REV and file(FILE))
... is wrong, because max will return only one revision, and for
a proper parents, you need to return two occasionally.
Lastly, it doesn't help that `hg parents -r REV FILE` is buggy
due to a quirk in filelogs.
Here's a repository to consider when evaluating whether your
revset is correct:
$ hg log -G --template '{rev} {files}\n';
@ 10 a
|
o 9 a b
|\
| o 8 a
| |
o | 7 a
| |
+---o 6 b
| |/
| o 5 b
| |
o | 4 b
| |
+---o 3
| |/
+---o 2
| |/
| o 1 b
|
o 0 a
revs 4 and 5 create a conflict.
The conflict is resolved in the same way by both 6 and 9.
You would hope that parents around 9/10 would point to 9,
but `hg parents` will point to 6 due to the aforementioned bug.
Here's the winning solution test script and its output.
echo $a;
echo rp12-max: `hg log -r "max(::p1($a) and file(b)) + max(::p2($a) and file(b))" -q` 2> /dev/null;
echo expected: `hg parents -q -r $a b` 2> /dev/null;
Note that for 10, the output differs, but again, this is because
of the aforementioned bug. The rp12-max output is "correct",
whereas "expected" is just an unfortunate bug. The abort output
is due to something else. I'm not sure why someone thought it
was important to abort to stdio instead of stderr, but that's
really not my problem here.
10
rp12-max: 9:184ebefc2fce
expected: 6:dd558142b03f
9
rp12-max: 5:c26e7dd67644 4:db73392995c3
expected: 5:c26e7dd67644 4:db73392995c3
8
rp12-max: 5:c26e7dd67644
expected: 5:c26e7dd67644
7
rp12-max: 4:db73392995c3
expected: 4:db73392995c3
6
rp12-max: 5:c26e7dd67644 4:db73392995c3
expected: 5:c26e7dd67644 4:db73392995c3
5
rp12-max: 1:070fe4290d06
expected: 1:070fe4290d06
4
rp12-max:
abort: 'b' not found in manifest!
expected:
3
rp12-max: 1:070fe4290d06
expected: 1:070fe4290d06
2
rp12-max: 1:070fe4290d06
expected: 1:070fe4290d06
1
rp12-max:
abort: 'b' not found in manifest!
expected:
0
rp12-max:
abort: 'b' not found in manifest!
expected:
author | timeless <timeless@mozdev.org> |
---|---|
date | Wed, 23 Dec 2015 19:07:34 +0000 |
parents | ef9301ce6046 |
children | 17b85d739b62 |
line wrap: on
line source
# If you want to change PREFIX, do not just edit it below. The changed # value wont get passed on to recursive make calls. You should instead # override the variable on the command like: # # % make PREFIX=/opt/ install PREFIX=/usr/local export PREFIX PYTHON=python $(eval HGROOT := $(shell pwd)) HGPYTHONS ?= $(HGROOT)/build/pythons PURE= PYFILES:=$(shell find mercurial hgext doc -name '*.py') DOCFILES=mercurial/help/*.txt export LANGUAGE=C export LC_ALL=C TESTFLAGS ?= $(shell echo $$HGTESTFLAGS) # Set this to e.g. "mingw32" to use a non-default compiler. COMPILER= help: @echo 'Commonly used make targets:' @echo ' all - build program and documentation' @echo ' install - install program and man pages to $$PREFIX ($(PREFIX))' @echo ' install-home - install with setup.py install --home=$$HOME ($(HOME))' @echo ' local - build for inplace usage' @echo ' tests - run all tests in the automatic test suite' @echo ' test-foo - run only specified tests (e.g. test-merge1.t)' @echo ' dist - run all tests and create a source tarball in dist/' @echo ' clean - remove files created by other targets' @echo ' (except installed files or dist source tarball)' @echo ' update-pot - update i18n/hg.pot' @echo @echo 'Example for a system-wide installation under /usr/local:' @echo ' make all && su -c "make install" && hg version' @echo @echo 'Example for a local installation (usable in this directory):' @echo ' make local && ./hg version' all: build doc local: $(PYTHON) setup.py $(PURE) \ build_py -c -d . \ build_ext $(COMPILER:%=-c %) -i \ build_hgexe $(COMPILER:%=-c %) -i \ build_mo env HGRCPATH= $(PYTHON) hg version build: $(PYTHON) setup.py $(PURE) build $(COMPILER:%=-c %) wheel: FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILER:%=-c %) doc: $(MAKE) -C doc clean: -$(PYTHON) setup.py clean --all # ignore errors from this command find contrib doc hgext i18n mercurial tests \ \( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';' rm -f $(addprefix mercurial/,$(notdir $(wildcard mercurial/pure/[a-z]*.py))) rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err if test -d .hg; then rm -f mercurial/__version__.py; fi rm -rf build mercurial/locale $(MAKE) -C doc clean install: install-bin install-doc install-bin: build $(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force install-doc: doc cd doc && $(MAKE) $(MFLAGS) install install-home: install-home-bin install-home-doc install-home-bin: build $(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force install-home-doc: doc cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install MANIFEST-doc: $(MAKE) -C doc MANIFEST MANIFEST.in: MANIFEST-doc hg manifest | sed -e 's/^/include /' > MANIFEST.in echo include mercurial/__version__.py >> MANIFEST.in sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in dist: tests dist-notests dist-notests: doc MANIFEST.in TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist check: tests tests: cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) test-%: cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@ testpy-%: @echo Looking for Python $* in $(HGPYTHONS) [ -e $(HGPYTHONS)/$*/bin/python ] || ( \ cd $$(mktemp --directory --tmpdir) && \ $(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python ) cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS) check-code: hg manifest | xargs python contrib/check-code.py update-pot: i18n/hg.pot i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext $(PYTHON) i18n/hggettext mercurial/commands.py \ hgext/*.py hgext/*/__init__.py \ mercurial/fileset.py mercurial/revset.py \ mercurial/templatefilters.py mercurial/templatekw.py \ mercurial/templater.py \ mercurial/filemerge.py \ mercurial/hgweb/webcommands.py \ $(DOCFILES) > i18n/hg.pot.tmp # All strings marked for translation in Mercurial contain # ASCII characters only. But some files contain string # literals like this '\037\213'. xgettext thinks it has to # parse them even though they are not marked for translation. # Extracting with an explicit encoding of ISO-8859-1 will make # xgettext "parse" and ignore them. echo $(PYFILES) | xargs \ xgettext --package-name "Mercurial" \ --msgid-bugs-address "<mercurial-devel@selenic.com>" \ --copyright-holder "Matt Mackall <mpm@selenic.com> and others" \ --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \ -d hg -p i18n -o hg.pot.tmp $(PYTHON) i18n/posplit i18n/hg.pot.tmp # The target file is not created before the last step. So it never is in # an intermediate state. mv -f i18n/hg.pot.tmp i18n/hg.pot %.po: i18n/hg.pot # work on a temporary copy for never having a half completed target cp $@ $@.tmp msgmerge --no-location --update $@.tmp $^ mv -f $@.tmp $@ # Packaging targets osx: python -c 'import bdist_mpkg.script_bdist_mpkg' || \ (echo "Missing bdist_mpkg (easy_install bdist_mpkg)"; false) rm -rf dist/mercurial-*.mpkg python -m bdist_mpkg.script_bdist_mpkg setup.py -- python contrib/fixpax.py dist/mercurial-*.mpkg/Contents/Packages/*.pkg/Contents/Archive.pax.gz mkdir -p packages/osx N=`cd dist && echo mercurial-*.mpkg | sed 's,\.mpkg$$,,'` && hdiutil create -srcfolder dist/$$N.mpkg/ -scrub -volname "$$N" -ov packages/osx/$$N.dmg rm -rf dist/mercurial-*.mpkg deb: contrib/builddeb docker-debian-jessie: mkdir -p packages/debian-jessie contrib/dockerdeb debian jessie fedora20: mkdir -p packages/fedora20 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/fedora20 cp rpmbuild/SRPMS/* packages/fedora20 rm -rf rpmbuild docker-fedora20: mkdir -p packages/fedora20 contrib/dockerrpm fedora20 fedora21: mkdir -p packages/fedora21 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/fedora21 cp rpmbuild/SRPMS/* packages/fedora21 rm -rf rpmbuild docker-fedora21: mkdir -p packages/fedora21 contrib/dockerrpm fedora21 centos5: mkdir -p packages/centos5 contrib/buildrpm --withpython cp rpmbuild/RPMS/*/* packages/centos5 cp rpmbuild/SRPMS/* packages/centos5 docker-centos5: mkdir -p packages/centos5 contrib/dockerrpm centos5 --withpython centos6: mkdir -p packages/centos6 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/centos6 cp rpmbuild/SRPMS/* packages/centos6 docker-centos6: mkdir -p packages/centos6 contrib/dockerrpm centos6 centos7: mkdir -p packages/centos7 contrib/buildrpm cp rpmbuild/RPMS/*/* packages/centos7 cp rpmbuild/SRPMS/* packages/centos7 docker-centos7: mkdir -p packages/centos7 contrib/dockerrpm centos7 .PHONY: help all local build doc clean install install-bin install-doc \ install-home install-home-bin install-home-doc \ dist dist-notests check tests check-code update-pot \ osx fedora20 docker-fedora20 fedora21 docker-fedora21 \ centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7