view tests/test-narrow-exchange.t @ 42486:35d674a3d5db

copies: don't filter out copy targets created on other side of merge commit

If file X is copied to Y on one side of merge and the other side
creates Y (no copy), we would not mark that as copy. In the
changeset-centric pathcopies() version, that was done by checking if
the copy target existed on the other branch. Even though merge commits
are pretty uncommon, it still turned out to be too expensive to load
the manifest of the parents of merge commits. In a repo of
mozilla-unified converted to storing copies in changesets, about 2m30s
of `hg debugpathcopies FIREFOX_BETA_59_END FIREFOX_BETA_60_BASE` is
spent on this check of merge commits.

I tried to think of a way of storing more information in the
changesets in order to cheaply detect these cases, but I couldn't
think of a solution. So this patch simply removes those checks.

For reference, these extra copies are reported from the aforementioned
command after this patch:

  browser/base/content/sanitize.js -> browser/modules/Sanitizer.jsm
  testing/mozbase/mozprocess/tests/process_normal_finish_python.ini -> testing/mozbase/mozprocess/tests/process_normal_finish.ini
  testing/mozbase/mozprocess/tests/process_waittimeout_python.ini -> testing/mozbase/mozprocess/tests/process_waittimeout.ini
  testing/mozbase/mozprocess/tests/process_waittimeout_10s_python.ini -> testing/mozbase/mozprocess/tests/process_waittimeout_10s.ini

Since these copies were created on one side of some merge, it still
seems reasonable to include them, so I'm not even sure it's worse than
filelog pathcopies(), just different.

Differential Revision: https://phab.mercurial-scm.org/D6420

#testcases lfs-on lfs-off

#if lfs-on
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs =
  > EOF
#endif

  $ . "$TESTDIR/narrow-library.sh"

create full repo

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 1 > inside/f
  $ mkdir inside2
  $ echo 1 > inside2/f
  $ mkdir outside
  $ echo 1 > outside/f
  $ hg ci -Aqm 'initial'

  $ echo 2 > inside/f
  $ hg ci -qm 'inside 2'

  $ echo 2 > inside2/f
  $ hg ci -qm 'inside2 2'

  $ echo 2 > outside/f
  $ hg ci -qm 'outside 2'

  $ cd ..

  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone --narrow ssh://user@dummy/master narrow2 --include inside --include inside2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Can push to wider repo if change does not affect paths in wider repo that are
not also in narrower repo

  $ cd narrow
  $ echo 3 > inside/f
  $ hg ci -m 'inside 3'
  $ hg push ssh://user@dummy/narrow2
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrower repo if change affects only paths within remote's
narrow spec

  $ cd ../narrow2
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ hg co -r 'desc("inside 3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 4 > inside/f
  $ hg ci -m 'inside 4'
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrow repo if change affects only paths outside remote's
narrow spec

  $ echo 3 > inside2/f
  $ hg ci -m 'inside2 3'
TODO: this should be successful
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: transaction abort!
  remote: rollback completed
  remote: abort: data/inside2/f.i@4a1aa07735e6: unknown parent! (reporevlogstore !)
  remote: abort: data/inside2/f/index@4a1aa07735e6: no node! (reposimplestore !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4)
  [255]

Can pull from wider repo if change affects only paths outside remote's
narrow spec
  $ echo 4 > inside2/f
  $ hg ci -m 'inside2 4'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg log -G -T '{rev} {node|short} {files}\n'
  o  4 ba3480e2f9de inside/f
  |
  @  3 4e5edd526618 inside/f
  |
  o  2 81e7e07b7ab0 outside/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ hg pull ssh://user@dummy/narrow2
  pulling from ssh://user@dummy/narrow2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets d78a96df731d
  (run 'hg update' to get a working copy)

Check that the resulting history is valid in the full repo

  $ cd ../narrow2
  $ hg push ssh://user@dummy/master
  pushing to ssh://user@dummy/master
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 4 changes to 2 files
  $ cd ../master
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 8 changesets with 10 changes to 3 files

Can not push to wider repo if change affects paths in wider repo that are
not also in narrower repo
  $ cd ../master
  $ hg co -r 'desc("inside2 4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 5 > inside2/f
  $ hg ci -m 'inside2 5'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  8 5970befb64ba inside2/f
  |
  o  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets * (glob)
  (run 'hg update' to get a working copy)
TODO: this should tell the user that their narrow clone does not have the
necessary content to be able to push to the target

TODO: lfs shouldn't abort like this
  $ hg push ssh://user@dummy/narrow2 || true
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 0 changes to 0 files
  remote: error: pretxnchangegroup.lfs hook raised an exception: data/inside2/f.i@f59b4e021835: no match found (lfs-on !)
  remote: transaction abort! (lfs-on !)
  remote: rollback completed (lfs-on !)
  remote: abort: data/inside2/f.i@f59b4e021835: no match found! (lfs-on !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4) (lfs-on !)