view hgext/pager.py @ 24636:36872036169b

treemanifest: further optimize treemanifest.matches()

The matches function was previously traversing all submanifests to look for
matching files, even though it was possible to know if a submanifest won't
contain any matches.

This change adds a visitdir function on the match object to decide quickly if
a directory should be visited when traversing. The function also decides if
_all_ subdirectories should be traversed.

Adding this logic as methods on the match object also makes the logic
modifiable by extensions, such as largefiles.

An example of a command this speeds up is running
  hg status --rev .^ python/
on the Mozilla repo with the treemanifest experiment enabled.
It goes from 2.03s to 1.85s.

More improvements to speed from this change will happen when treemanifests are
lazily loaded. Because a flat manifest is still loaded and then converted
into treemanifests, speed improvements are limited.

This change has no negative effect on speed. For a worst-case example, this
command is not negatively impacted:
  hg status --rev .^ 'relglob:*.js'
on the Mozilla repo. It goes from 2.83s to 2.82s.

# pager.py - display output using a pager
#
# Copyright 2008 David Soria Parra <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
#
# To load the extension, add it to your configuration file:
#
#   [extension]
#   pager =
#
# Run "hg help pager" to get info on configuration.

'''browse command output with an external pager

To set the pager that should be used, set the application variable::

  [pager]
  pager = less -FRX

If no pager is set, the pager extensions uses the environment variable
$PAGER. If neither pager.pager, nor $PAGER is set, no pager is used.

You can disable the pager for certain commands by adding them to the
pager.ignore list::

  [pager]
  ignore = version, help, update

You can also enable the pager only for certain commands using
pager.attend. Below is the default list of commands to be paged::

  [pager]
  attend = annotate, cat, diff, export, glog, log, qdiff

Setting pager.attend to an empty value will cause all commands to be
paged.

If pager.attend is present, pager.ignore will be ignored.

Lastly, you can enable and disable paging for individual commands with
the attend-<command> option. This setting takes precedence over
existing attend and ignore options and defaults::

  [pager]
  attend-cat = false

To ignore global commands like :hg:`version` or :hg:`help`, you have
to specify them in your user configuration file.

The --pager=... option can also be used to control when the pager is
used. Use a boolean value like yes, no, on, off, or use auto for
normal behavior.

'''

import atexit, sys, os, signal, subprocess, errno, shlex
from mercurial import commands, dispatch, util, extensions, cmdutil
from mercurial.i18n import _

testedwith = 'internal'

def _pagerfork(ui, p):
    if not util.safehasattr(os, 'fork'):
        sys.stdout = util.popen(p, 'wb')
        if ui._isatty(sys.stderr):
            sys.stderr = sys.stdout
        return
    fdin, fdout = os.pipe()
    pid = os.fork()
    if pid == 0:
        os.close(fdin)
        os.dup2(fdout, sys.stdout.fileno())
        if ui._isatty(sys.stderr):
            os.dup2(fdout, sys.stderr.fileno())
        os.close(fdout)
        return
    os.dup2(fdin, sys.stdin.fileno())
    os.close(fdin)
    os.close(fdout)
    try:
        os.execvp('/bin/sh', ['/bin/sh', '-c', p])
    except OSError, e:
        if e.errno == errno.ENOENT:
            # no /bin/sh, try executing the pager directly
            args = shlex.split(p)
            os.execvp(args[0], args)
        else:
            raise

def _pagersubprocess(ui, p):
    pager = subprocess.Popen(p, shell=True, bufsize=-1,
                             close_fds=util.closefds, stdin=subprocess.PIPE,
                             stdout=sys.stdout, stderr=sys.stderr)

    stdout = os.dup(sys.stdout.fileno())
    stderr = os.dup(sys.stderr.fileno())
    os.dup2(pager.stdin.fileno(), sys.stdout.fileno())
    if ui._isatty(sys.stderr):
        os.dup2(pager.stdin.fileno(), sys.stderr.fileno())

    @atexit.register
    def killpager():
        if util.safehasattr(signal, "SIGINT"):
            signal.signal(signal.SIGINT, signal.SIG_IGN)
        pager.stdin.close()
        os.dup2(stdout, sys.stdout.fileno())
        os.dup2(stderr, sys.stderr.fileno())
        pager.wait()

def _runpager(ui, p):
    # The subprocess module shipped with Python <= 2.4 is buggy (issue3533).
    # The compat version is buggy on Windows (issue3225), but has been shipping
    # with hg for a long time.  Preserve existing functionality.
    if sys.version_info >= (2, 5):
        _pagersubprocess(ui, p)
    else:
        _pagerfork(ui, p)

def uisetup(ui):
    if '--debugger' in sys.argv or not ui.formatted():
        return

    def pagecmd(orig, ui, options, cmd, cmdfunc):
        p = ui.config("pager", "pager", os.environ.get("PAGER"))
        usepager = False
        always = util.parsebool(options['pager'])
        auto = options['pager'] == 'auto'

        if not p:
            pass
        elif always:
            usepager = True
        elif not auto:
            usepager = False
        else:
            attend = ui.configlist('pager', 'attend', attended)
            ignore = ui.configlist('pager', 'ignore')
            cmds, _ = cmdutil.findcmd(cmd, commands.table)

            for cmd in cmds:
                var = 'attend-%s' % cmd
                if ui.config('pager', var):
                    usepager = ui.configbool('pager', var)
                    break
                if (cmd in attend or
                     (cmd not in ignore and not attend)):
                    usepager = True
                    break

        setattr(ui, 'pageractive', usepager)

        if usepager:
            ui.setconfig('ui', 'formatted', ui.formatted(), 'pager')
            ui.setconfig('ui', 'interactive', False, 'pager')
            if util.safehasattr(signal, "SIGPIPE"):
                signal.signal(signal.SIGPIPE, signal.SIG_DFL)
            _runpager(ui, p)
        return orig(ui, options, cmd, cmdfunc)

    # Wrap dispatch._runcommand after color is loaded so color can see
    # ui.pageractive. Otherwise, if we loaded first, color's wrapped
    # dispatch._runcommand would run without having access to ui.pageractive.
    def afterloaded(loaded):
        extensions.wrapfunction(dispatch, '_runcommand', pagecmd)
    extensions.afterloaded('color', afterloaded)

def extsetup(ui):
    commands.globalopts.append(
        ('', 'pager', 'auto',
         _("when to paginate (boolean, always, auto, or never)"),
         _('TYPE')))

attended = ['annotate', 'cat', 'diff', 'export', 'glog', 'log', 'qdiff']