view hgext/censor.py @ 33649:377e8ddaebef stable

pathauditor: disable cache of audited paths by default (issue5628)

The initial attempt was to discard cache when appropriate, but it appears
to be error prone. We had to carefully inspect all places where audit() is
called e.g. without actually updating filesystem, before removing files and
directories, etc.

So, this patch disables the cache of audited paths by default, and enables
it only for the following cases:

 - short-lived auditor objects
 - repo.vfs, repo.svfs, and repo.cachevfs, which are managed directories
   and considered sort of append-only (a file/directory would never be
   replaced with a symlink)

There would be more cacheable vfs objects (e.g. mq.queue.opener), but I
decided not to inspect all of them in this patch. We can make them cached
later.

Benchmark result:

- using old clone of http://selenic.com/repo/linux-2.6/ (38319 files)
- on tmpfs
- run HGRCPATH=/dev/null hg up -q --time tip && hg up -q null
- try 4 times and take the last three results

original:
real 7.480 secs (user 1.140+22.760 sys 0.150+1.690)
real 8.010 secs (user 1.070+22.280 sys 0.170+2.120)
real 7.470 secs (user 1.120+22.390 sys 0.120+1.910)

clearcache (the other series):
real 7.680 secs (user 1.120+23.420 sys 0.140+1.970)
real 7.670 secs (user 1.110+23.620 sys 0.130+1.810)
real 7.740 secs (user 1.090+23.510 sys 0.160+1.940)

enable cache only for vfs and svfs (this series):
real 8.730 secs (user 1.500+25.190 sys 0.260+2.260)
real 8.750 secs (user 1.490+25.170 sys 0.250+2.340)
real 9.010 secs (user 1.680+25.340 sys 0.280+2.540)

remove cache function at all (for reference):
real 9.620 secs (user 1.440+27.120 sys 0.250+2.980)
real 9.420 secs (user 1.400+26.940 sys 0.320+3.130)
real 9.760 secs (user 1.530+27.270 sys 0.250+2.970)

# Copyright (C) 2015 - Mike Edgar <[e-mail]>
#
# This extension enables removal of file content at a given revision,
# rewriting the data/metadata of successive revisions to preserve revision log
# integrity.

"""erase file content at a given revision

The censor command instructs Mercurial to erase all content of a file at a given
revision *without updating the changeset hash.* This allows existing history to
remain valid while preventing future clones/pulls from receiving the erased
data.

Typical uses for censor are due to security or legal requirements, including::

 * Passwords, private keys, cryptographic material
 * Licensed data/code/libraries for which the license has expired
 * Personally Identifiable Information or other private data

Censored nodes can interrupt mercurial's typical operation whenever the excised
data needs to be materialized. Some commands, like ``hg cat``/``hg revert``,
simply fail when asked to produce censored data. Others, like ``hg verify`` and
``hg update``, must be capable of tolerating censored data to continue to
function in a meaningful way. Such commands only tolerate censored file
revisions if they are allowed by the "censor.policy=ignore" config option.
"""

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import short

from mercurial import (
    error,
    filelog,
    lock as lockmod,
    registrar,
    revlog,
    scmutil,
    util,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('censor',
    [('r', 'rev', '', _('censor file from specified revision'), _('REV')),
     ('t', 'tombstone', '', _('replacement tombstone data'), _('TEXT'))],
    _('-r REV [-t TEXT] [FILE]'))
def censor(ui, repo, path, rev='', tombstone='', **opts):
    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()
        return _docensor(ui, repo, path, rev, tombstone, **opts)
    finally:
        lockmod.release(lock, wlock)

def _docensor(ui, repo, path, rev='', tombstone='', **opts):
    if not path:
        raise error.Abort(_('must specify file path to censor'))
    if not rev:
        raise error.Abort(_('must specify revision to censor'))

    wctx = repo[None]

    m = scmutil.match(wctx, (path,))
    if m.anypats() or len(m.files()) != 1:
        raise error.Abort(_('can only specify an explicit filename'))
    path = m.files()[0]
    flog = repo.file(path)
    if not len(flog):
        raise error.Abort(_('cannot censor file with no history'))

    rev = scmutil.revsingle(repo, rev, rev).rev()
    try:
        ctx = repo[rev]
    except KeyError:
        raise error.Abort(_('invalid revision identifier %s') % rev)

    try:
        fctx = ctx.filectx(path)
    except error.LookupError:
        raise error.Abort(_('file does not exist at revision %s') % rev)

    fnode = fctx.filenode()
    headctxs = [repo[c] for c in repo.heads()]
    heads = [c for c in headctxs if path in c and c.filenode(path) == fnode]
    if heads:
        headlist = ', '.join([short(c.node()) for c in heads])
        raise error.Abort(_('cannot censor file in heads (%s)') % headlist,
            hint=_('clean/delete and commit first'))

    wp = wctx.parents()
    if ctx.node() in [p.node() for p in wp]:
        raise error.Abort(_('cannot censor working directory'),
            hint=_('clean/delete/update first'))

    flogv = flog.version & 0xFFFF
    if flogv != revlog.REVLOGV1:
        raise error.Abort(
            _('censor does not support revlog version %d') % (flogv,))

    tombstone = filelog.packmeta({"censored": tombstone}, "")

    crev = fctx.filerev()

    if len(tombstone) > flog.rawsize(crev):
        raise error.Abort(_(
            'censor tombstone must be no longer than censored data'))

    # Using two files instead of one makes it easy to rewrite entry-by-entry
    idxread = repo.svfs(flog.indexfile, 'r')
    idxwrite = repo.svfs(flog.indexfile, 'wb', atomictemp=True)
    if flog.version & revlog.FLAG_INLINE_DATA:
        dataread, datawrite = idxread, idxwrite
    else:
        dataread = repo.svfs(flog.datafile, 'r')
        datawrite = repo.svfs(flog.datafile, 'wb', atomictemp=True)

    # Copy all revlog data up to the entry to be censored.
    rio = revlog.revlogio()
    offset = flog.start(crev)

    for chunk in util.filechunkiter(idxread, limit=crev * rio.size):
        idxwrite.write(chunk)
    for chunk in util.filechunkiter(dataread, limit=offset):
        datawrite.write(chunk)

    def rewriteindex(r, newoffs, newdata=None):
        """Rewrite the index entry with a new data offset and optional new data.

        The newdata argument, if given, is a tuple of three positive integers:
        (new compressed, new uncompressed, added flag bits).
        """
        offlags, comp, uncomp, base, link, p1, p2, nodeid = flog.index[r]
        flags = revlog.gettype(offlags)
        if newdata:
            comp, uncomp, nflags = newdata
            flags |= nflags
        offlags = revlog.offset_type(newoffs, flags)
        e = (offlags, comp, uncomp, r, link, p1, p2, nodeid)
        idxwrite.write(rio.packentry(e, None, flog.version, r))
        idxread.seek(rio.size, 1)

    def rewrite(r, offs, data, nflags=revlog.REVIDX_DEFAULT_FLAGS):
        """Write the given full text to the filelog with the given data offset.

        Returns:
            The integer number of data bytes written, for tracking data offsets.
        """
        flag, compdata = flog.compress(data)
        newcomp = len(flag) + len(compdata)
        rewriteindex(r, offs, (newcomp, len(data), nflags))
        datawrite.write(flag)
        datawrite.write(compdata)
        dataread.seek(flog.length(r), 1)
        return newcomp

    # Rewrite censored revlog entry with (padded) tombstone data.
    pad = ' ' * (flog.rawsize(crev) - len(tombstone))
    offset += rewrite(crev, offset, tombstone + pad, revlog.REVIDX_ISCENSORED)

    # Rewrite all following filelog revisions fixing up offsets and deltas.
    for srev in xrange(crev + 1, len(flog)):
        if crev in flog.parentrevs(srev):
            # Immediate children of censored node must be re-added as fulltext.
            try:
                revdata = flog.revision(srev)
            except error.CensoredNodeError as e:
                revdata = e.tombstone
            dlen = rewrite(srev, offset, revdata)
        else:
            # Copy any other revision data verbatim after fixing up the offset.
            rewriteindex(srev, offset)
            dlen = flog.length(srev)
            for chunk in util.filechunkiter(dataread, limit=dlen):
                datawrite.write(chunk)
        offset += dlen

    idxread.close()
    idxwrite.close()
    if dataread is not idxread:
        dataread.close()
        datawrite.close()