view hgext/fetch.py @ 33649:377e8ddaebef stable

pathauditor: disable cache of audited paths by default (issue5628)

The initial attempt was to discard cache when appropriate, but it appears
to be error prone. We had to carefully inspect all places where audit() is
called e.g. without actually updating filesystem, before removing files and
directories, etc.

So, this patch disables the cache of audited paths by default, and enables
it only for the following cases:

 - short-lived auditor objects
 - repo.vfs, repo.svfs, and repo.cachevfs, which are managed directories
   and considered sort of append-only (a file/directory would never be
   replaced with a symlink)

There would be more cacheable vfs objects (e.g. mq.queue.opener), but I
decided not to inspect all of them in this patch. We can make them cached
later.

Benchmark result:

- using old clone of http://selenic.com/repo/linux-2.6/ (38319 files)
- on tmpfs
- run HGRCPATH=/dev/null hg up -q --time tip && hg up -q null
- try 4 times and take the last three results

original:
real 7.480 secs (user 1.140+22.760 sys 0.150+1.690)
real 8.010 secs (user 1.070+22.280 sys 0.170+2.120)
real 7.470 secs (user 1.120+22.390 sys 0.120+1.910)

clearcache (the other series):
real 7.680 secs (user 1.120+23.420 sys 0.140+1.970)
real 7.670 secs (user 1.110+23.620 sys 0.130+1.810)
real 7.740 secs (user 1.090+23.510 sys 0.160+1.940)

enable cache only for vfs and svfs (this series):
real 8.730 secs (user 1.500+25.190 sys 0.260+2.260)
real 8.750 secs (user 1.490+25.170 sys 0.250+2.340)
real 9.010 secs (user 1.680+25.340 sys 0.280+2.540)

remove cache function at all (for reference):
real 9.620 secs (user 1.440+27.120 sys 0.250+2.980)
real 9.420 secs (user 1.400+26.940 sys 0.320+3.130)
real 9.760 secs (user 1.530+27.270 sys 0.250+2.970)

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import (
    short,
)
from mercurial import (
    cmdutil,
    error,
    exchange,
    hg,
    lock,
    registrar,
    util,
)

release = lock.release
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('fetch',
    [('r', 'rev', [],
     _('a specific revision you would like to pull'), _('REV')),
    ('', 'edit', None, _('invoke editor on commit messages')),
    ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
    ('', 'switch-parent', None, _('switch parents when merging')),
    ] + cmdutil.commitopts + cmdutil.commitopts2 + cmdutil.remoteopts,
    _('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, _p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise error.Abort(_('working directory not at branch tip'),
                         hint=_("use 'hg update' to check out branch tip"))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()

        cmdutil.bailifchanged(repo)

        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise error.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise error.Abort(err)

        # Are there any changes at all?
        modheads = exchange.pull(repo, other, heads=revs).cgresult
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editopt = opts.get('edit') or opts.get('force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)