view hgext/hgk.py @ 33649:377e8ddaebef stable

pathauditor: disable cache of audited paths by default (issue5628)

The initial attempt was to discard cache when appropriate, but it appears
to be error prone. We had to carefully inspect all places where audit() is
called e.g. without actually updating filesystem, before removing files and
directories, etc.

So, this patch disables the cache of audited paths by default, and enables
it only for the following cases:

 - short-lived auditor objects
 - repo.vfs, repo.svfs, and repo.cachevfs, which are managed directories
   and considered sort of append-only (a file/directory would never be
   replaced with a symlink)

There would be more cacheable vfs objects (e.g. mq.queue.opener), but I
decided not to inspect all of them in this patch. We can make them cached
later.

Benchmark result:

- using old clone of http://selenic.com/repo/linux-2.6/ (38319 files)
- on tmpfs
- run HGRCPATH=/dev/null hg up -q --time tip && hg up -q null
- try 4 times and take the last three results

original:
real 7.480 secs (user 1.140+22.760 sys 0.150+1.690)
real 8.010 secs (user 1.070+22.280 sys 0.170+2.120)
real 7.470 secs (user 1.120+22.390 sys 0.120+1.910)

clearcache (the other series):
real 7.680 secs (user 1.120+23.420 sys 0.140+1.970)
real 7.670 secs (user 1.110+23.620 sys 0.130+1.810)
real 7.740 secs (user 1.090+23.510 sys 0.160+1.940)

enable cache only for vfs and svfs (this series):
real 8.730 secs (user 1.500+25.190 sys 0.260+2.260)
real 8.750 secs (user 1.490+25.170 sys 0.250+2.340)
real 9.010 secs (user 1.680+25.340 sys 0.280+2.540)

remove cache function at all (for reference):
real 9.620 secs (user 1.440+27.120 sys 0.250+2.980)
real 9.420 secs (user 1.400+26.940 sys 0.320+3.130)
real 9.760 secs (user 1.530+27.270 sys 0.250+2.970)

# Minimal support for git commands on an hg repository
#
# Copyright 2005, 2006 Chris Mason <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''browse the repository in a graphical way

The hgk extension allows browsing the history of a repository in a
graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is not
distributed with Mercurial.)

hgk consists of two parts: a Tcl script that does the displaying and
querying of information, and an extension to Mercurial named hgk.py,
which provides hooks for hgk to get information. hgk can be found in
the contrib directory, and the extension is shipped in the hgext
repository, and needs to be enabled.

The :hg:`view` command will launch the hgk Tcl script. For this command
to work, hgk must be in your search path. Alternately, you can specify
the path to hgk in your configuration file::

  [hgk]
  path = /location/of/hgk

hgk can make use of the extdiff extension to visualize revisions.
Assuming you had already configured extdiff vdiff command, just add::

  [hgk]
  vdiff=vdiff

Revisions context menu will now display additional entries to fire
vdiff on hovered and selected revisions.
'''

from __future__ import absolute_import

import os

from mercurial.i18n import _
from mercurial.node import (
    nullid,
    nullrev,
    short,
)
from mercurial import (
    commands,
    obsolete,
    patch,
    registrar,
    scmutil,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('debug-diff-tree',
    [('p', 'patch', None, _('generate patch')),
    ('r', 'recursive', None, _('recursive')),
    ('P', 'pretty', None, _('pretty')),
    ('s', 'stdin', None, _('stdin')),
    ('C', 'copy', None, _('detect copies')),
    ('S', 'search', "", _('search'))],
    ('[OPTION]... NODE1 NODE2 [FILE]...'),
    inferrepo=True)
def difftree(ui, repo, node1=None, node2=None, *files, **opts):
    """diff trees from two commits"""
    def __difftree(repo, node1, node2, files=None):
        assert node2 is not None
        if files is None:
            files = []
        mmap = repo[node1].manifest()
        mmap2 = repo[node2].manifest()
        m = scmutil.match(repo[node1], files)
        modified, added, removed  = repo.status(node1, node2, m)[:3]
        empty = short(nullid)

        for f in modified:
            # TODO get file permissions
            ui.write((":100664 100664 %s %s M\t%s\t%s\n") %
                     (short(mmap[f]), short(mmap2[f]), f, f))
        for f in added:
            ui.write((":000000 100664 %s %s N\t%s\t%s\n") %
                     (empty, short(mmap2[f]), f, f))
        for f in removed:
            ui.write((":100664 000000 %s %s D\t%s\t%s\n") %
                     (short(mmap[f]), empty, f, f))
    ##

    while True:
        if opts['stdin']:
            try:
                line = raw_input().split(' ')
                node1 = line[0]
                if len(line) > 1:
                    node2 = line[1]
                else:
                    node2 = None
            except EOFError:
                break
        node1 = repo.lookup(node1)
        if node2:
            node2 = repo.lookup(node2)
        else:
            node2 = node1
            node1 = repo.changelog.parents(node1)[0]
        if opts['patch']:
            if opts['pretty']:
                catcommit(ui, repo, node2, "")
            m = scmutil.match(repo[node1], files)
            diffopts = patch.difffeatureopts(ui)
            diffopts.git = True
            chunks = patch.diff(repo, node1, node2, match=m,
                                opts=diffopts)
            for chunk in chunks:
                ui.write(chunk)
        else:
            __difftree(repo, node1, node2, files=files)
        if not opts['stdin']:
            break

def catcommit(ui, repo, n, prefix, ctx=None):
    nlprefix = '\n' + prefix
    if ctx is None:
        ctx = repo[n]
    # use ctx.node() instead ??
    ui.write(("tree %s\n" % short(ctx.changeset()[0])))
    for p in ctx.parents():
        ui.write(("parent %s\n" % p))

    date = ctx.date()
    description = ctx.description().replace("\0", "")
    ui.write(("author %s %s %s\n" % (ctx.user(), int(date[0]), date[1])))

    if 'committer' in ctx.extra():
        ui.write(("committer %s\n" % ctx.extra()['committer']))

    ui.write(("revision %d\n" % ctx.rev()))
    ui.write(("branch %s\n" % ctx.branch()))
    if obsolete.isenabled(repo, obsolete.createmarkersopt):
        if ctx.obsolete():
            ui.write(("obsolete\n"))
    ui.write(("phase %s\n\n" % ctx.phasestr()))

    if prefix != "":
        ui.write("%s%s\n" % (prefix,
                             description.replace('\n', nlprefix).strip()))
    else:
        ui.write(description + "\n")
    if prefix:
        ui.write('\0')

@command('debug-merge-base', [], _('REV REV'))
def base(ui, repo, node1, node2):
    """output common ancestor information"""
    node1 = repo.lookup(node1)
    node2 = repo.lookup(node2)
    n = repo.changelog.ancestor(node1, node2)
    ui.write(short(n) + "\n")

@command('debug-cat-file',
    [('s', 'stdin', None, _('stdin'))],
    _('[OPTION]... TYPE FILE'),
    inferrepo=True)
def catfile(ui, repo, type=None, r=None, **opts):
    """cat a specific revision"""
    # in stdin mode, every line except the commit is prefixed with two
    # spaces.  This way the our caller can find the commit without magic
    # strings
    #
    prefix = ""
    if opts['stdin']:
        try:
            (type, r) = raw_input().split(' ')
            prefix = "    "
        except EOFError:
            return

    else:
        if not type or not r:
            ui.warn(_("cat-file: type or revision not supplied\n"))
            commands.help_(ui, 'cat-file')

    while r:
        if type != "commit":
            ui.warn(_("aborting hg cat-file only understands commits\n"))
            return 1
        n = repo.lookup(r)
        catcommit(ui, repo, n, prefix)
        if opts['stdin']:
            try:
                (type, r) = raw_input().split(' ')
            except EOFError:
                break
        else:
            break

# git rev-tree is a confusing thing.  You can supply a number of
# commit sha1s on the command line, and it walks the commit history
# telling you which commits are reachable from the supplied ones via
# a bitmask based on arg position.
# you can specify a commit to stop at by starting the sha1 with ^
def revtree(ui, args, repo, full="tree", maxnr=0, parents=False):
    def chlogwalk():
        count = len(repo)
        i = count
        l = [0] * 100
        chunk = 100
        while True:
            if chunk > i:
                chunk = i
                i = 0
            else:
                i -= chunk

            for x in xrange(chunk):
                if i + x >= count:
                    l[chunk - x:] = [0] * (chunk - x)
                    break
                if full is not None:
                    if (i + x) in repo:
                        l[x] = repo[i + x]
                        l[x].changeset() # force reading
                else:
                    if (i + x) in repo:
                        l[x] = 1
            for x in xrange(chunk - 1, -1, -1):
                if l[x] != 0:
                    yield (i + x, full is not None and l[x] or None)
            if i == 0:
                break

    # calculate and return the reachability bitmask for sha
    def is_reachable(ar, reachable, sha):
        if len(ar) == 0:
            return 1
        mask = 0
        for i in xrange(len(ar)):
            if sha in reachable[i]:
                mask |= 1 << i

        return mask

    reachable = []
    stop_sha1 = []
    want_sha1 = []
    count = 0

    # figure out which commits they are asking for and which ones they
    # want us to stop on
    for i, arg in enumerate(args):
        if arg.startswith('^'):
            s = repo.lookup(arg[1:])
            stop_sha1.append(s)
            want_sha1.append(s)
        elif arg != 'HEAD':
            want_sha1.append(repo.lookup(arg))

    # calculate the graph for the supplied commits
    for i, n in enumerate(want_sha1):
        reachable.append(set())
        visit = [n]
        reachable[i].add(n)
        while visit:
            n = visit.pop(0)
            if n in stop_sha1:
                continue
            for p in repo.changelog.parents(n):
                if p not in reachable[i]:
                    reachable[i].add(p)
                    visit.append(p)
                if p in stop_sha1:
                    continue

    # walk the repository looking for commits that are in our
    # reachability graph
    for i, ctx in chlogwalk():
        if i not in repo:
            continue
        n = repo.changelog.node(i)
        mask = is_reachable(want_sha1, reachable, n)
        if mask:
            parentstr = ""
            if parents:
                pp = repo.changelog.parents(n)
                if pp[0] != nullid:
                    parentstr += " " + short(pp[0])
                if pp[1] != nullid:
                    parentstr += " " + short(pp[1])
            if not full:
                ui.write("%s%s\n" % (short(n), parentstr))
            elif full == "commit":
                ui.write("%s%s\n" % (short(n), parentstr))
                catcommit(ui, repo, n, '    ', ctx)
            else:
                (p1, p2) = repo.changelog.parents(n)
                (h, h1, h2) = map(short, (n, p1, p2))
                (i1, i2) = map(repo.changelog.rev, (p1, p2))

                date = ctx.date()[0]
                ui.write("%s %s:%s" % (date, h, mask))
                mask = is_reachable(want_sha1, reachable, p1)
                if i1 != nullrev and mask > 0:
                    ui.write("%s:%s " % (h1, mask)),
                mask = is_reachable(want_sha1, reachable, p2)
                if i2 != nullrev and mask > 0:
                    ui.write("%s:%s " % (h2, mask))
                ui.write("\n")
            if maxnr and count >= maxnr:
                break
            count += 1

# git rev-list tries to order things by date, and has the ability to stop
# at a given commit without walking the whole repo.  TODO add the stop
# parameter
@command('debug-rev-list',
    [('H', 'header', None, _('header')),
    ('t', 'topo-order', None, _('topo-order')),
    ('p', 'parents', None, _('parents')),
    ('n', 'max-count', 0, _('max-count'))],
    ('[OPTION]... REV...'))
def revlist(ui, repo, *revs, **opts):
    """print revisions"""
    if opts['header']:
        full = "commit"
    else:
        full = None
    copy = [x for x in revs]
    revtree(ui, copy, repo, full, opts['max_count'], opts['parents'])

@command('view',
    [('l', 'limit', '',
     _('limit number of changes displayed'), _('NUM'))],
    _('[-l LIMIT] [REVRANGE]'))
def view(ui, repo, *etc, **opts):
    "start interactive history viewer"
    os.chdir(repo.root)
    optstr = ' '.join(['--%s %s' % (k, v) for k, v in opts.iteritems() if v])
    if repo.filtername is None:
        optstr += '--hidden'

    cmd = ui.config("hgk", "path", "hgk") + " %s %s" % (optstr, " ".join(etc))
    ui.debug("running %s\n" % cmd)
    ui.system(cmd, blockedtag='hgk_view')