view tests/test-exchange-obsmarkers-case-B6.t @ 41722:37b33c34bf4f

templatekw: add a {negrev} keyword

Revision numbers are getting much maligned for two reasons: they are
too long in large repos and users get confused by their local-only
nature. It just occurred to me that negative revision numbers avoid
both of those problems. Since negative revision numbers change
whenever the repo changes, it's much more obvious that they are a
local-only convenience. Additionally, for the recent commits that we
usually care about the most, negative revision numbers are always near
zero.

This commit adds a negrev templatekw to more easily expose negative
revision numbers. It's not easy to reliably produce this output with
existing keywords due to hidden commits while at the same time
ensuring good performance.

============================================
Testing obsolescence markers push: Cases B.6
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 6: Pruned changeset with precursors not in pushed set

B.6 Pruned changeset with precursors not in pushed set
======================================================

.. {{{
..   B ø⇠⊗ B'
..     | |
..   A ○ |
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `B ø⇠⊗ B'`
..  * B' prune
..
.. Command run:
..
..  * hg push -r O
..
.. Expected exchange:
..
..  * `B ø⇠⊗ B'`
..  * B' prune

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Initial

  $ setuprepos B.6
  creating test repo for test case B.6
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B0
  $ hg up --quiet 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  obsoleted 1 changesets
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  f6298a8ac3a4 (draft): B1
  |
  | x  962ecf6b1afc (draft): B0
  | |
  | o  f5bc6836db60 (draft): A
  |/
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-------------------------------------

  $ dotest B.6 O
  ## Running testcase B.6
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  2 new obsolescence markers
  ## post pull state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}