view mercurial/pathencode.c @ 30779:38aa1ca97b6a

repair: migrate revlogs during upgrade

Our next step for in-place upgrade is to migrate store data. Revlogs
are the biggest source of data within the store and a store is useless
without them, so we implement their migration first.

Our strategy for migrating revlogs is to walk the store and call
`revlog.clone()` on each revlog. There are some minor complications.

Because revlogs have different storage options (e.g. changelog has
generaldelta and delta chains disabled), we need to obtain the
correct class of revlog so inserted data is encoded properly for its
type.

Various attempts at implementing progress indicators that didn't lead
to frustration from false "it's almost done" indicators were made.

I initially used a single progress bar based on number of revlogs.
However, this quickly churned through all filelogs, got to 99% then
effectively froze at 99.99% when it got to the manifest.

So I converted the progress bar to total revision count. This was a
little bit better. But the manifest was still significantly slower
than filelogs and it took forever to process the last few percent.

I then tried both revision/chunk bytes and raw bytes as the
denominator. This had the opposite effect: because so much data is in
manifests, it would churn through filelogs without showing much
progress. When it got to manifests, it would fill in 90+% of the
progress bar.

I finally gave up having a unified progress bar and instead implemented
3 progress bars: 1 for filelog revisions, 1 for manifest revisions, and
1 for changelog revisions. I added extra messages indicating the total
number of revisions of each so users know there are more progress bars
coming.

I also added extra messages before and after each stage to give extra
details about what is happening. Strictly speaking, this isn't
necessary. But the numbers are impressive. For example, when converting
a non-generaldelta mozilla-central repository, the messages you see are:

   migrating 2475593 total revisions (1833043 in filelogs, 321156 in manifests, 321394 in changelog)
   migrating 1.67 GB in store; 2508 GB tracked data
   migrating 267868 filelogs containing 1833043 revisions (1.09 GB in store; 57.3 GB tracked data)
   finished migrating 1833043 filelog revisions across 267868 filelogs; change in size: -415776 bytes
   migrating 1 manifests containing 321156 revisions (518 MB in store; 2451 GB tracked data)

That "2508 GB" figure really blew me away. I had no clue that the raw
tracked data in mozilla-central was that large. Granted, 2451 GB is in
the manifest and "only" 57.3 GB is in filelogs. But still.

It's worth noting that gratuitous loading of source revlogs in order
to display numbers and progress bars does serve a purpose: it ensures
we can open all source revlogs. We don't want to spend several minutes
copying revlogs only to encounter a permissions error or similar later.

As part of this commit, we also add swapping of the store directory
to the upgrade function. After revlogs are converted, we move the
old store into the backup directory then move the temporary repo's
store into the old store's location. On well-behaved systems, this
should be 2 atomic operations and the window of inconsistency show be
very narrow.

There are still a few improvements to be made to store copying and
upgrading. But this commit gets the bulk of the work out of the way.

/*
 pathencode.c - efficient path name encoding

 Copyright 2012 Facebook

 This software may be used and distributed according to the terms of
 the GNU General Public License, incorporated herein by reference.
*/

/*
 * An implementation of the name encoding scheme used by the fncache
 * store.  The common case is of a path < 120 bytes long, which is
 * handled either in a single pass with no allocations or two passes
 * with a single allocation.  For longer paths, multiple passes are
 * required.
 */

#define PY_SSIZE_T_CLEAN
#include <Python.h>
#include <assert.h>
#include <ctype.h>
#include <stdlib.h>
#include <string.h>

#include "util.h"

/* state machine for the fast path */
enum path_state {
	START,   /* first byte of a path component */
	A,       /* "AUX" */
	AU,
	THIRD,   /* third of a 3-byte sequence, e.g. "AUX", "NUL" */
	C,       /* "CON" or "COMn" */
	CO,
	COMLPT,  /* "COM" or "LPT" */
	COMLPTn,
	L,
	LP,
	N,
	NU,
	P,       /* "PRN" */
	PR,
	LDOT,    /* leading '.' */
	DOT,     /* '.' in a non-leading position */
	H,       /* ".h" */
	HGDI,    /* ".hg", ".d", or ".i" */
	SPACE,
	DEFAULT  /* byte of a path component after the first */
};

/* state machine for dir-encoding */
enum dir_state {
	DDOT,
	DH,
	DHGDI,
	DDEFAULT
};

static inline int inset(const uint32_t bitset[], char c)
{
	return bitset[((uint8_t)c) >> 5] & (1 << (((uint8_t)c) & 31));
}

static inline void charcopy(char *dest, Py_ssize_t *destlen, size_t destsize,
                            char c)
{
	if (dest) {
		assert(*destlen < destsize);
		dest[*destlen] = c;
	}
	(*destlen)++;
}

static inline void memcopy(char *dest, Py_ssize_t *destlen, size_t destsize,
                           const void *src, Py_ssize_t len)
{
	if (dest) {
		assert(*destlen + len < destsize);
		memcpy((void *)&dest[*destlen], src, len);
	}
	*destlen += len;
}

static inline void hexencode(char *dest, Py_ssize_t *destlen, size_t destsize,
			     uint8_t c)
{
	static const char hexdigit[] = "0123456789abcdef";

	charcopy(dest, destlen, destsize, hexdigit[c >> 4]);
	charcopy(dest, destlen, destsize, hexdigit[c & 15]);
}

/* 3-byte escape: tilde followed by two hex digits */
static inline void escape3(char *dest, Py_ssize_t *destlen, size_t destsize,
			   char c)
{
	charcopy(dest, destlen, destsize, '~');
	hexencode(dest, destlen, destsize, c);
}

static Py_ssize_t _encodedir(char *dest, size_t destsize,
                             const char *src, Py_ssize_t len)
{
	enum dir_state state = DDEFAULT;
	Py_ssize_t i = 0, destlen = 0;

	while (i < len) {
		switch (state) {
		case DDOT:
			switch (src[i]) {
			case 'd':
			case 'i':
				state = DHGDI;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'h':
				state = DH;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			default:
				state = DDEFAULT;
				break;
			}
			break;
		case DH:
			if (src[i] == 'g') {
				state = DHGDI;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DDEFAULT;
			break;
		case DHGDI:
			if (src[i] == '/') {
				memcopy(dest, &destlen, destsize, ".hg", 3);
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			state = DDEFAULT;
			break;
		case DDEFAULT:
			if (src[i] == '.')
				state = DDOT;
			charcopy(dest, &destlen, destsize, src[i++]);
			break;
		}
	}

	return destlen;
}

PyObject *encodedir(PyObject *self, PyObject *args)
{
	Py_ssize_t len, newlen;
	PyObject *pathobj, *newobj;
	char *path;

	if (!PyArg_ParseTuple(args, "O:encodedir", &pathobj))
		return NULL;

	if (PyBytes_AsStringAndSize(pathobj, &path, &len) == -1) {
		PyErr_SetString(PyExc_TypeError, "expected a string");
		return NULL;
	}

	newlen = len ? _encodedir(NULL, 0, path, len + 1) : 1;

	if (newlen == len + 1) {
		Py_INCREF(pathobj);
		return pathobj;
	}

	newobj = PyBytes_FromStringAndSize(NULL, newlen);

	if (newobj) {
		assert(PyBytes_Check(newobj));
		Py_SIZE(newobj)--;
		_encodedir(PyBytes_AS_STRING(newobj), newlen, path,
			   len + 1);
	}

	return newobj;
}

static Py_ssize_t _encode(const uint32_t twobytes[8], const uint32_t onebyte[8],
			  char *dest, Py_ssize_t destlen, size_t destsize,
			  const char *src, Py_ssize_t len,
			  int encodedir)
{
	enum path_state state = START;
	Py_ssize_t i = 0;

	/*
	 * Python strings end with a zero byte, which we use as a
	 * terminal token as they are not valid inside path names.
	 */

	while (i < len) {
		switch (state) {
		case START:
			switch (src[i]) {
			case '/':
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case '.':
				state = LDOT;
				escape3(dest, &destlen, destsize, src[i++]);
				break;
			case ' ':
				state = DEFAULT;
				escape3(dest, &destlen, destsize, src[i++]);
				break;
			case 'a':
				state = A;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'c':
				state = C;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'l':
				state = L;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'n':
				state = N;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'p':
				state = P;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			default:
				state = DEFAULT;
				break;
			}
			break;
		case A:
			if (src[i] == 'u') {
				state = AU;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case AU:
			if (src[i] == 'x') {
				state = THIRD;
				i++;
			}
			else state = DEFAULT;
			break;
		case THIRD:
			state = DEFAULT;
			switch (src[i]) {
			case '.':
			case '/':
			case '\0':
				escape3(dest, &destlen, destsize, src[i - 1]);
				break;
			default:
				i--;
				break;
			}
			break;
		case C:
			if (src[i] == 'o') {
				state = CO;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case CO:
			if (src[i] == 'm') {
				state = COMLPT;
				i++;
			}
			else if (src[i] == 'n') {
				state = THIRD;
				i++;
			}
			else state = DEFAULT;
			break;
		case COMLPT:
			switch (src[i]) {
			case '1': case '2': case '3': case '4': case '5':
			case '6': case '7': case '8': case '9':
				state = COMLPTn;
				i++;
				break;
			default:
				state = DEFAULT;
				charcopy(dest, &destlen, destsize, src[i - 1]);
				break;
			}
			break;
		case COMLPTn:
			state = DEFAULT;
			switch (src[i]) {
			case '.':
			case '/':
			case '\0':
				escape3(dest, &destlen, destsize, src[i - 2]);
				charcopy(dest, &destlen, destsize, src[i - 1]);
				break;
			default:
				memcopy(dest, &destlen, destsize,
					&src[i - 2], 2);
				break;
			}
			break;
		case L:
			if (src[i] == 'p') {
				state = LP;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case LP:
			if (src[i] == 't') {
				state = COMLPT;
				i++;
			}
			else state = DEFAULT;
			break;
		case N:
			if (src[i] == 'u') {
				state = NU;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case NU:
			if (src[i] == 'l') {
				state = THIRD;
				i++;
			}
			else state = DEFAULT;
			break;
		case P:
			if (src[i] == 'r') {
				state = PR;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case PR:
			if (src[i] == 'n') {
				state = THIRD;
				i++;
			}
			else state = DEFAULT;
			break;
		case LDOT:
			switch (src[i]) {
			case 'd':
			case 'i':
				state = HGDI;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'h':
				state = H;
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			default:
				state = DEFAULT;
				break;
			}
			break;
		case DOT:
			switch (src[i]) {
			case '/':
			case '\0':
				state = START;
				memcopy(dest, &destlen, destsize, "~2e", 3);
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'd':
			case 'i':
				state = HGDI;
				charcopy(dest, &destlen, destsize, '.');
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			case 'h':
				state = H;
				memcopy(dest, &destlen, destsize, ".h", 2);
				i++;
				break;
			default:
				state = DEFAULT;
				charcopy(dest, &destlen, destsize, '.');
				break;
			}
			break;
		case H:
			if (src[i] == 'g') {
				state = HGDI;
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case HGDI:
			if (src[i] == '/') {
				state = START;
				if (encodedir)
					memcopy(dest, &destlen, destsize, ".hg",
						3);
				charcopy(dest, &destlen, destsize, src[i++]);
			}
			else state = DEFAULT;
			break;
		case SPACE:
			switch (src[i]) {
			case '/':
			case '\0':
				state = START;
				memcopy(dest, &destlen, destsize, "~20", 3);
				charcopy(dest, &destlen, destsize, src[i++]);
				break;
			default:
				state = DEFAULT;
				charcopy(dest, &destlen, destsize, ' ');
				break;
			}
			break;
		case DEFAULT:
			while (inset(onebyte, src[i])) {
				charcopy(dest, &destlen, destsize, src[i++]);
				if (i == len)
					goto done;
			}
			switch (src[i]) {
			case '.':
				state = DOT;
				i++;
				break;
			case ' ':
				state = SPACE;
				i++;
				break;
			case '/':
				state = START;
				charcopy(dest, &destlen, destsize, '/');
				i++;
				break;
			default:
				if (inset(onebyte, src[i])) {
					do {
						charcopy(dest, &destlen,
							 destsize, src[i++]);
					} while (i < len &&
						 inset(onebyte, src[i]));
				}
				else if (inset(twobytes, src[i])) {
					char c = src[i++];
					charcopy(dest, &destlen, destsize, '_');
					charcopy(dest, &destlen, destsize,
						 c == '_' ? '_' : c + 32);
				}
				else
					escape3(dest, &destlen, destsize,
						src[i++]);
				break;
			}
			break;
		}
	}
done:
	return destlen;
}

static Py_ssize_t basicencode(char *dest, size_t destsize,
			      const char *src, Py_ssize_t len)
{
	static const uint32_t twobytes[8] = { 0, 0, 0x87fffffe };

	static const uint32_t onebyte[8] = {
		1, 0x2bff3bfa, 0x68000001, 0x2fffffff,
	};

	Py_ssize_t destlen = 0;

	return _encode(twobytes, onebyte, dest, destlen, destsize,
		       src, len, 1);
}

static const Py_ssize_t maxstorepathlen = 120;

static Py_ssize_t _lowerencode(char *dest, size_t destsize,
			       const char *src, Py_ssize_t len)
{
	static const uint32_t onebyte[8] = {
		1, 0x2bfffbfb, 0xe8000001, 0x2fffffff
	};

	static const uint32_t lower[8] = { 0, 0, 0x7fffffe };

	Py_ssize_t i, destlen = 0;

	for (i = 0; i < len; i++) {
		if (inset(onebyte, src[i]))
			charcopy(dest, &destlen, destsize, src[i]);
		else if (inset(lower, src[i]))
			charcopy(dest, &destlen, destsize, src[i] + 32);
		else
			escape3(dest, &destlen, destsize, src[i]);
	}

	return destlen;
}

PyObject *lowerencode(PyObject *self, PyObject *args)
{
	char *path;
	Py_ssize_t len, newlen;
	PyObject *ret;

	if (!PyArg_ParseTuple(args, "s#:lowerencode", &path, &len))
		return NULL;

	newlen = _lowerencode(NULL, 0, path, len);
	ret = PyBytes_FromStringAndSize(NULL, newlen);
	if (ret)
		_lowerencode(PyBytes_AS_STRING(ret), newlen, path, len);

	return ret;
}

/* See store.py:_auxencode for a description. */
static Py_ssize_t auxencode(char *dest, size_t destsize,
			    const char *src, Py_ssize_t len)
{
	static const uint32_t twobytes[8];

	static const uint32_t onebyte[8] = {
		~0U, 0xffff3ffe, ~0U, ~0U, ~0U, ~0U, ~0U, ~0U,
	};

	return _encode(twobytes, onebyte, dest, 0, destsize, src, len, 0);
}

static PyObject *hashmangle(const char *src, Py_ssize_t len, const char sha[20])
{
	static const Py_ssize_t dirprefixlen = 8;
	static const Py_ssize_t maxshortdirslen = 68;
	char *dest;
	PyObject *ret;

	Py_ssize_t i, d, p, lastslash = len - 1, lastdot = -1;
	Py_ssize_t destsize, destlen = 0, slop, used;

	while (lastslash >= 0 && src[lastslash] != '/') {
		if (src[lastslash] == '.' && lastdot == -1)
			lastdot = lastslash;
		lastslash--;
	}

#if 0
	/* All paths should end in a suffix of ".i" or ".d".
           Unfortunately, the file names in test-hybridencode.py
           violate this rule.  */
	if (lastdot != len - 3) {
		PyErr_SetString(PyExc_ValueError,
				"suffix missing or wrong length");
		return NULL;
	}
#endif

	/* If src contains a suffix, we will append it to the end of
	   the new string, so make room. */
	destsize = 120;
	if (lastdot >= 0)
		destsize += len - lastdot - 1;

	ret = PyBytes_FromStringAndSize(NULL, destsize);
	if (ret == NULL)
		return NULL;

	dest = PyBytes_AS_STRING(ret);
	memcopy(dest, &destlen, destsize, "dh/", 3);

	/* Copy up to dirprefixlen bytes of each path component, up to
	   a limit of maxshortdirslen bytes. */
	for (i = d = p = 0; i < lastslash; i++, p++) {
		if (src[i] == '/') {
			char d = dest[destlen - 1];
			/* After truncation, a directory name may end
			   in a space or dot, which are unportable. */
			if (d == '.' || d == ' ')
				dest[destlen - 1] = '_';
			/* The + 3 is to account for "dh/" in the beginning */
			if (destlen > maxshortdirslen + 3)
				break;
			charcopy(dest, &destlen, destsize, src[i]);
			p = -1;
		}
		else if (p < dirprefixlen)
			charcopy(dest, &destlen, destsize, src[i]);
	}

	/* Rewind to just before the last slash copied. */
	if (destlen > maxshortdirslen + 3)
		do {
			destlen--;
		} while (destlen > 0 && dest[destlen] != '/');

	if (destlen > 3) {
		if (lastslash > 0) {
			char d = dest[destlen - 1];
			/* The last directory component may be
			   truncated, so make it safe. */
			if (d == '.' || d == ' ')
				dest[destlen - 1] = '_';
		}

		charcopy(dest, &destlen, destsize, '/');
	}

	/* Add a prefix of the original file's name. Its length
	   depends on the number of bytes left after accounting for
	   hash and suffix. */
	used = destlen + 40;
	if (lastdot >= 0)
		used += len - lastdot - 1;
	slop = maxstorepathlen - used;
	if (slop > 0) {
		Py_ssize_t basenamelen =
			lastslash >= 0 ? len - lastslash - 2 : len - 1;

		if (basenamelen > slop)
			basenamelen = slop;
		if (basenamelen > 0)
			memcopy(dest, &destlen, destsize, &src[lastslash + 1],
				basenamelen);
	}

	/* Add hash and suffix. */
	for (i = 0; i < 20; i++)
		hexencode(dest, &destlen, destsize, sha[i]);

	if (lastdot >= 0)
		memcopy(dest, &destlen, destsize, &src[lastdot],
			len - lastdot - 1);

	assert(PyBytes_Check(ret));
	Py_SIZE(ret) = destlen;

	return ret;
}

/*
 * Avoiding a trip through Python would improve performance by 50%,
 * but we don't encounter enough long names to be worth the code.
 */
static int sha1hash(char hash[20], const char *str, Py_ssize_t len)
{
	static PyObject *shafunc;
	PyObject *shaobj, *hashobj;

	if (shafunc == NULL) {
		PyObject *hashlib, *name = PyBytes_FromString("hashlib");

		if (name == NULL)
			return -1;

		hashlib = PyImport_Import(name);
		Py_DECREF(name);

		if (hashlib == NULL) {
			PyErr_SetString(PyExc_ImportError, "hashlib");
			return -1;
		}
		shafunc = PyObject_GetAttrString(hashlib, "sha1");
		Py_DECREF(hashlib);

		if (shafunc == NULL) {
			PyErr_SetString(PyExc_AttributeError,
					"module 'hashlib' has no "
					"attribute 'sha1'");
			return -1;
		}
	}

	shaobj = PyObject_CallFunction(shafunc, "s#", str, len);

	if (shaobj == NULL)
		return -1;

	hashobj = PyObject_CallMethod(shaobj, "digest", "");
	Py_DECREF(shaobj);
	if (hashobj == NULL)
		return -1;

	if (!PyBytes_Check(hashobj) || PyBytes_GET_SIZE(hashobj) != 20) {
		PyErr_SetString(PyExc_TypeError,
				"result of digest is not a 20-byte hash");
		Py_DECREF(hashobj);
		return -1;
	}

	memcpy(hash, PyBytes_AS_STRING(hashobj), 20);
	Py_DECREF(hashobj);
	return 0;
}

#define MAXENCODE 4096 * 4

static PyObject *hashencode(const char *src, Py_ssize_t len)
{
	char dired[MAXENCODE];
	char lowered[MAXENCODE];
	char auxed[MAXENCODE];
	Py_ssize_t dirlen, lowerlen, auxlen, baselen;
	char sha[20];

	baselen = (len - 5) * 3;
	if (baselen >= MAXENCODE) {
		PyErr_SetString(PyExc_ValueError, "string too long");
		return NULL;
	}

	dirlen = _encodedir(dired, baselen, src, len);
	if (sha1hash(sha, dired, dirlen - 1) == -1)
		return NULL;
	lowerlen = _lowerencode(lowered, baselen, dired + 5, dirlen - 5);
	auxlen = auxencode(auxed, baselen, lowered, lowerlen);
	return hashmangle(auxed, auxlen, sha);
}

PyObject *pathencode(PyObject *self, PyObject *args)
{
	Py_ssize_t len, newlen;
	PyObject *pathobj, *newobj;
	char *path;

	if (!PyArg_ParseTuple(args, "O:pathencode", &pathobj))
		return NULL;

	if (PyBytes_AsStringAndSize(pathobj, &path, &len) == -1) {
		PyErr_SetString(PyExc_TypeError, "expected a string");
		return NULL;
	}

	if (len > maxstorepathlen)
		newlen = maxstorepathlen + 2;
	else
		newlen = len ? basicencode(NULL, 0, path, len + 1) : 1;

	if (newlen <= maxstorepathlen + 1) {
		if (newlen == len + 1) {
			Py_INCREF(pathobj);
			return pathobj;
		}

		newobj = PyBytes_FromStringAndSize(NULL, newlen);

		if (newobj) {
			assert(PyBytes_Check(newobj));
			Py_SIZE(newobj)--;
			basicencode(PyBytes_AS_STRING(newobj), newlen, path,
				    len + 1);
		}
	}
	else
		newobj = hashencode(path, len + 1);

	return newobj;
}