view tests/test-remove.t @ 30779:38aa1ca97b6a

repair: migrate revlogs during upgrade

Our next step for in-place upgrade is to migrate store data. Revlogs
are the biggest source of data within the store and a store is useless
without them, so we implement their migration first.

Our strategy for migrating revlogs is to walk the store and call
`revlog.clone()` on each revlog. There are some minor complications.

Because revlogs have different storage options (e.g. changelog has
generaldelta and delta chains disabled), we need to obtain the
correct class of revlog so inserted data is encoded properly for its
type.

Various attempts at implementing progress indicators that didn't lead
to frustration from false "it's almost done" indicators were made.

I initially used a single progress bar based on number of revlogs.
However, this quickly churned through all filelogs, got to 99% then
effectively froze at 99.99% when it got to the manifest.

So I converted the progress bar to total revision count. This was a
little bit better. But the manifest was still significantly slower
than filelogs and it took forever to process the last few percent.

I then tried both revision/chunk bytes and raw bytes as the
denominator. This had the opposite effect: because so much data is in
manifests, it would churn through filelogs without showing much
progress. When it got to manifests, it would fill in 90+% of the
progress bar.

I finally gave up having a unified progress bar and instead implemented
3 progress bars: 1 for filelog revisions, 1 for manifest revisions, and
1 for changelog revisions. I added extra messages indicating the total
number of revisions of each so users know there are more progress bars
coming.

I also added extra messages before and after each stage to give extra
details about what is happening. Strictly speaking, this isn't
necessary. But the numbers are impressive. For example, when converting
a non-generaldelta mozilla-central repository, the messages you see are:

   migrating 2475593 total revisions (1833043 in filelogs, 321156 in manifests, 321394 in changelog)
   migrating 1.67 GB in store; 2508 GB tracked data
   migrating 267868 filelogs containing 1833043 revisions (1.09 GB in store; 57.3 GB tracked data)
   finished migrating 1833043 filelog revisions across 267868 filelogs; change in size: -415776 bytes
   migrating 1 manifests containing 321156 revisions (518 MB in store; 2451 GB tracked data)

That "2508 GB" figure really blew me away. I had no clue that the raw
tracked data in mozilla-central was that large. Granted, 2451 GB is in
the manifest and "only" 57.3 GB is in filelogs. But still.

It's worth noting that gratuitous loading of source revlogs in order
to display numbers and progress bars does serve a purpose: it ensures
we can open all source revlogs. We don't want to spend several minutes
copying revlogs only to encounter a permissions error or similar later.

As part of this commit, we also add swapping of the store directory
to the upgrade function. After revlogs are converted, we move the
old store into the backup directory then move the temporary repo's
store into the old store's location. On well-behaved systems, this
should be 2 atomic operations and the window of inconsistency show be
very narrow.

There are still a few improvements to be made to store copying and
upgrading. But this commit gets the bulk of the work out of the way.

  $ remove() {
  >     hg rm $@
  >     echo "exit code: $?"
  >     hg st
  >     # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
  >     find . -name .hg -prune -o -type f -print | sort
  >     hg up -C
  > }

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > disable=False
  > assume-tty = 1
  > delay = 0
  > # set changedelay really large so we don't see nested topics
  > changedelay = 30000
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg init a
  $ cd a
  $ echo a > foo

file not managed

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is untracked
  exit code: 1
  ? foo
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg add foo
  $ hg commit -m1

the table cases
00 state added, options none

  $ echo b > bar
  $ hg add bar
  $ remove bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file has been marked for add (use 'hg forget' to undo add)
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

01 state clean, options none

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

02 state modified, options none

  $ echo b >> foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is modified (use -f to force removal)
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

03 state missing, options none

  $ rm foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

10 state added, options -f

  $ echo b > bar
  $ hg add bar
  $ remove -f bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

11 state clean, options -f

  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

12 state modified, options -f

  $ echo b >> foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

13 state missing, options -f

  $ rm foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

20 state added, options -A

  $ echo b > bar
  $ hg add bar
  $ remove -A bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file still exists
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

21 state clean, options -A

  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

22 state modified, options -A

  $ echo b >> foo
  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

23 state missing, options -A

  $ rm foo
  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

30 state added, options -Af

  $ echo b > bar
  $ hg add bar
  $ remove -Af bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

31 state clean, options -Af

  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

32 state modified, options -Af

  $ echo b >> foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

33 state missing, options -Af

  $ rm foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

test some directory stuff

  $ mkdir test
  $ echo a > test/foo
  $ echo b > test/bar
  $ hg ci -Am2
  adding test/bar
  adding test/foo

dir, options none

  $ rm test/bar
  $ remove test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -f

  $ rm test/bar
  $ remove -f test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -A

  $ rm test/bar
  $ remove -A test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  not removing test/foo: file still exists (glob)
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Af

  $ rm test/bar
  $ remove -Af test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

test remove dropping empty trees (issue1861)

  $ mkdir -p issue1861/b/c
  $ echo x > issue1861/x
  $ echo y > issue1861/b/c/y
  $ hg ci -Am add
  adding issue1861/b/c/y
  adding issue1861/x
  $ hg rm issue1861/b
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing issue1861/b/c/y (glob)
  $ hg ci -m remove
  $ ls issue1861
  x

test that commit does not crash if the user removes a newly added file

  $ touch f1
  $ hg add f1
  $ rm f1
  $ hg ci -A -mx
  removing f1
  nothing changed
  [1]

handling of untracked directories and missing files

  $ mkdir d1
  $ echo a > d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing d1: no tracked files
  [1]
  $ hg add d1/a
  $ rm d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing d1/a (glob)

  $ hg rm --after nosuch
  nosuch: * (glob)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  [1]