worker: avoid potential partial write of pickled data
Previously, the code wrote the pickled data using os.write(). However,
os.write() can write less bytes than passed to it. To trigger the problem, the
pickled data had to be larger than
2147479552 bytes on my system.
Instead, open a file object and pass it to pickle.dump(). This also has the
advantage that it doesn’t buffer the whole pickled data in memory.
Note that the opened file must be buffered because pickle doesn’t support
unbuffered streams because unbuffered streams’ write() method might write less
bytes than passed to it (like os.write()) but pickle.dump() relies on that all
bytes are written (see https://github.com/python/cpython/issues/93050).
The side effect of using a file object and a with statement is that wfd is
explicitly closed now while it seems like before it was implicitly closed by
process exit.
============================================
Testing obsolescence markers push: Cases A.1
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category A: simple cases
TestCase 1: pushing a single head
Subcases:
# A.1.1 pushing a single head (2 variants)
# A.1.2 pushing multiple changesets into a single head (2 variants)
Case: A.1.1 pushing a single head
=================================
..
.. {{{
.. ⇠◔ A
.. |
.. ● O
.. }}}
..
.. Marker exists from:
..
.. * A
..
.. Commands run:
..
.. * hg push -r A
.. * hg push
..
.. Expected exchange:
..
.. * chain from A
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos A.1.1
creating test repo for test case A.1.1
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
1 new obsolescence markers
$ hg log -G
@ f5bc6836db60 (draft): A
|
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
setup both variants
$ cp -R A.1.1 A.1.1.a
$ cp -R A.1.1 A.1.1.b
Variant a: push -r A
--------------------
$ dotest A.1.1.a A
## Running testcase A.1.1.a
# testing echange of "A" (f5bc6836db60)
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "f5bc6836db60" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
new changesets f5bc6836db60 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Variant b: push
---------------
$ dotest A.1.1.b
## Running testcase A.1.1.b
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
new changesets f5bc6836db60 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
A.1.2 pushing multiple changesets into a single head
====================================================
.. {{{
.. ◔ B
.. |
.. ⇠◔ A
.. |
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * A
..
.. Command run:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * chain from A
Setup
-----
initial
$ setuprepos A.1.2
creating test repo for test case A.1.2
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ mkcommit B
$ hg log -G
@ f6fbb35d8ac9 (draft): B
|
o f5bc6836db60 (draft): A
|
o a9bdc8b26820 (public): O
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
1 new obsolescence markers
$ inspect_obsmarkers
obsstore content
================
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
setup both variants
$ cp -R A.1.2 A.1.2.a
$ cp -R A.1.2 A.1.2.b
Variant a: push -r A
--------------------
$ dotest A.1.2.a B
## Running testcase A.1.2.a
# testing echange of "B" (f6fbb35d8ac9)
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "B" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "f6fbb35d8ac9" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 new obsolescence markers
new changesets f5bc6836db60:f6fbb35d8ac9 (2 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Variant b: push
---------------
$ dotest A.1.2.b
## Running testcase A.1.2.b
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 new obsolescence markers
new changesets f5bc6836db60:f6fbb35d8ac9 (2 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}