view mercurial/mpatch.c @ 26379:39d643252b9f

revlog: use existing file handle when reading during _addrevision

_addrevision() may need to read from revlogs as part of computing
deltas. Previously, we would flush existing file handles and open
a new, short-lived file handle to perform the reading.

If we have an existing file handle, it seems logical to reuse it
for reading instead of opening a new file handle. This patch
makes that the new behavior.

After this patch, revlog files are only reopened when adding
revisions if the revlog is switched from inline to non-inline.

On Linux when unbundling a bundle of the mozilla-central repo, this
patch has the following impact on system call counts:

Call     Before     After       Delta
write    827,639    673,390   -154,249
open     700,103    684,089    -16,014
read      74,489     74,489          0
fstat    493,924    461,896    -32,028
close    249,131    233,117    -16,014
stat     242,001    242,001          0
lstat     18,676     18,676          0
lseek     20,268     20,268          0
ioctl     14,652     13,173     -1,479
TOTAL  3,180,758  2,930,679   -250,079

It's worth noting that many of the open() calls fail due to missing
files. That's why there are many more open() calls than close().

Despite the significant system call reduction, this change does not
seem to have a significant performance impact on Linux.

On Windows 10 (not a VM, on a SSD), this patch appears to reduce
unbundle time for mozilla-central from ~960s to ~920s. This isn't
as significant as I was hoping. But a decrease it is nonetheless.
Still, Windows unbundle performance is still >2x slower than Linux.

Despite the lack of significant gains, fewer system calls is fewer
system calls. If nothing else, this will narrow the focus of potential
areas to optimize in the future.

/*
 mpatch.c - efficient binary patching for Mercurial

 This implements a patch algorithm that's O(m + nlog n) where m is the
 size of the output and n is the number of patches.

 Given a list of binary patches, it unpacks each into a hunk list,
 then combines the hunk lists with a treewise recursion to form a
 single hunk list. This hunk list is then applied to the original
 text.

 The text (or binary) fragments are copied directly from their source
 Python objects into a preallocated output string to avoid the
 allocation of intermediate Python objects. Working memory is about 2x
 the total number of hunks.

 Copyright 2005, 2006 Matt Mackall <[e-mail]>

 This software may be used and distributed according to the terms
 of the GNU General Public License, incorporated herein by reference.
*/

#define PY_SSIZE_T_CLEAN
#include <Python.h>
#include <stdlib.h>
#include <string.h>

#include "util.h"

static char mpatch_doc[] = "Efficient binary patching.";
static PyObject *mpatch_Error;

struct frag {
	int start, end, len;
	const char *data;
};

struct flist {
	struct frag *base, *head, *tail;
};

static struct flist *lalloc(Py_ssize_t size)
{
	struct flist *a = NULL;

	if (size < 1)
		size = 1;

	a = (struct flist *)malloc(sizeof(struct flist));
	if (a) {
		a->base = (struct frag *)malloc(sizeof(struct frag) * size);
		if (a->base) {
			a->head = a->tail = a->base;
			return a;
		}
		free(a);
		a = NULL;
	}
	if (!PyErr_Occurred())
		PyErr_NoMemory();
	return NULL;
}

static void lfree(struct flist *a)
{
	if (a) {
		free(a->base);
		free(a);
	}
}

static Py_ssize_t lsize(struct flist *a)
{
	return a->tail - a->head;
}

/* move hunks in source that are less cut to dest, compensating
   for changes in offset. the last hunk may be split if necessary.
*/
static int gather(struct flist *dest, struct flist *src, int cut, int offset)
{
	struct frag *d = dest->tail, *s = src->head;
	int postend, c, l;

	while (s != src->tail) {
		if (s->start + offset >= cut)
			break; /* we've gone far enough */

		postend = offset + s->start + s->len;
		if (postend <= cut) {
			/* save this hunk */
			offset += s->start + s->len - s->end;
			*d++ = *s++;
		}
		else {
			/* break up this hunk */
			c = cut - offset;
			if (s->end < c)
				c = s->end;
			l = cut - offset - s->start;
			if (s->len < l)
				l = s->len;

			offset += s->start + l - c;

			d->start = s->start;
			d->end = c;
			d->len = l;
			d->data = s->data;
			d++;
			s->start = c;
			s->len = s->len - l;
			s->data = s->data + l;

			break;
		}
	}

	dest->tail = d;
	src->head = s;
	return offset;
}

/* like gather, but with no output list */
static int discard(struct flist *src, int cut, int offset)
{
	struct frag *s = src->head;
	int postend, c, l;

	while (s != src->tail) {
		if (s->start + offset >= cut)
			break;

		postend = offset + s->start + s->len;
		if (postend <= cut) {
			offset += s->start + s->len - s->end;
			s++;
		}
		else {
			c = cut - offset;
			if (s->end < c)
				c = s->end;
			l = cut - offset - s->start;
			if (s->len < l)
				l = s->len;

			offset += s->start + l - c;
			s->start = c;
			s->len = s->len - l;
			s->data = s->data + l;

			break;
		}
	}

	src->head = s;
	return offset;
}

/* combine hunk lists a and b, while adjusting b for offset changes in a/
   this deletes a and b and returns the resultant list. */
static struct flist *combine(struct flist *a, struct flist *b)
{
	struct flist *c = NULL;
	struct frag *bh, *ct;
	int offset = 0, post;

	if (a && b)
		c = lalloc((lsize(a) + lsize(b)) * 2);

	if (c) {

		for (bh = b->head; bh != b->tail; bh++) {
			/* save old hunks */
			offset = gather(c, a, bh->start, offset);

			/* discard replaced hunks */
			post = discard(a, bh->end, offset);

			/* insert new hunk */
			ct = c->tail;
			ct->start = bh->start - offset;
			ct->end = bh->end - post;
			ct->len = bh->len;
			ct->data = bh->data;
			c->tail++;
			offset = post;
		}

		/* hold on to tail from a */
		memcpy(c->tail, a->head, sizeof(struct frag) * lsize(a));
		c->tail += lsize(a);
	}

	lfree(a);
	lfree(b);
	return c;
}

/* decode a binary patch into a hunk list */
static struct flist *decode(const char *bin, Py_ssize_t len)
{
	struct flist *l;
	struct frag *lt;
	int pos = 0;

	/* assume worst case size, we won't have many of these lists */
	l = lalloc(len / 12);
	if (!l)
		return NULL;

	lt = l->tail;

	while (pos >= 0 && pos < len) {
		lt->start = getbe32(bin + pos);
		lt->end = getbe32(bin + pos + 4);
		lt->len = getbe32(bin + pos + 8);
		if (lt->start > lt->end)
			break; /* sanity check */
		lt->data = bin + pos + 12;
		pos += 12 + lt->len;
		lt++;
	}

	if (pos != len) {
		if (!PyErr_Occurred())
			PyErr_SetString(mpatch_Error, "patch cannot be decoded");
		lfree(l);
		return NULL;
	}

	l->tail = lt;
	return l;
}

/* calculate the size of resultant text */
static Py_ssize_t calcsize(Py_ssize_t len, struct flist *l)
{
	Py_ssize_t outlen = 0, last = 0;
	struct frag *f = l->head;

	while (f != l->tail) {
		if (f->start < last || f->end > len) {
			if (!PyErr_Occurred())
				PyErr_SetString(mpatch_Error,
				                "invalid patch");
			return -1;
		}
		outlen += f->start - last;
		last = f->end;
		outlen += f->len;
		f++;
	}

	outlen += len - last;
	return outlen;
}

static int apply(char *buf, const char *orig, Py_ssize_t len, struct flist *l)
{
	struct frag *f = l->head;
	int last = 0;
	char *p = buf;

	while (f != l->tail) {
		if (f->start < last || f->end > len) {
			if (!PyErr_Occurred())
				PyErr_SetString(mpatch_Error,
				                "invalid patch");
			return 0;
		}
		memcpy(p, orig + last, f->start - last);
		p += f->start - last;
		memcpy(p, f->data, f->len);
		last = f->end;
		p += f->len;
		f++;
	}
	memcpy(p, orig + last, len - last);
	return 1;
}

/* recursively generate a patch of all bins between start and end */
static struct flist *fold(PyObject *bins, Py_ssize_t start, Py_ssize_t end)
{
	Py_ssize_t len, blen;
	const char *buffer;

	if (start + 1 == end) {
		/* trivial case, output a decoded list */
		PyObject *tmp = PyList_GetItem(bins, start);
		if (!tmp)
			return NULL;
		if (PyObject_AsCharBuffer(tmp, &buffer, &blen))
			return NULL;
		return decode(buffer, blen);
	}

	/* divide and conquer, memory management is elsewhere */
	len = (end - start) / 2;
	return combine(fold(bins, start, start + len),
		       fold(bins, start + len, end));
}

static PyObject *
patches(PyObject *self, PyObject *args)
{
	PyObject *text, *bins, *result;
	struct flist *patch;
	const char *in;
	char *out;
	Py_ssize_t len, outlen, inlen;

	if (!PyArg_ParseTuple(args, "OO:mpatch", &text, &bins))
		return NULL;

	len = PyList_Size(bins);
	if (!len) {
		/* nothing to do */
		Py_INCREF(text);
		return text;
	}

	if (PyObject_AsCharBuffer(text, &in, &inlen))
		return NULL;

	patch = fold(bins, 0, len);
	if (!patch)
		return NULL;

	outlen = calcsize(inlen, patch);
	if (outlen < 0) {
		result = NULL;
		goto cleanup;
	}
	result = PyBytes_FromStringAndSize(NULL, outlen);
	if (!result) {
		result = NULL;
		goto cleanup;
	}
	out = PyBytes_AsString(result);
	if (!apply(out, in, inlen, patch)) {
		Py_DECREF(result);
		result = NULL;
	}
cleanup:
	lfree(patch);
	return result;
}

/* calculate size of a patched file directly */
static PyObject *
patchedsize(PyObject *self, PyObject *args)
{
	long orig, start, end, len, outlen = 0, last = 0, pos = 0;
	Py_ssize_t patchlen;
	char *bin;

	if (!PyArg_ParseTuple(args, "ls#", &orig, &bin, &patchlen))
		return NULL;

	while (pos >= 0 && pos < patchlen) {
		start = getbe32(bin + pos);
		end = getbe32(bin + pos + 4);
		len = getbe32(bin + pos + 8);
		if (start > end)
			break; /* sanity check */
		pos += 12 + len;
		outlen += start - last;
		last = end;
		outlen += len;
	}

	if (pos != patchlen) {
		if (!PyErr_Occurred())
			PyErr_SetString(mpatch_Error, "patch cannot be decoded");
		return NULL;
	}

	outlen += orig - last;
	return Py_BuildValue("l", outlen);
}

static PyMethodDef methods[] = {
	{"patches", patches, METH_VARARGS, "apply a series of patches\n"},
	{"patchedsize", patchedsize, METH_VARARGS, "calculed patched size\n"},
	{NULL, NULL}
};

#ifdef IS_PY3K
static struct PyModuleDef mpatch_module = {
	PyModuleDef_HEAD_INIT,
	"mpatch",
	mpatch_doc,
	-1,
	methods
};

PyMODINIT_FUNC PyInit_mpatch(void)
{
	PyObject *m;

	m = PyModule_Create(&mpatch_module);
	if (m == NULL)
		return NULL;

	mpatch_Error = PyErr_NewException("mpatch.mpatchError", NULL, NULL);
	Py_INCREF(mpatch_Error);
	PyModule_AddObject(m, "mpatchError", mpatch_Error);

	return m;
}
#else
PyMODINIT_FUNC
initmpatch(void)
{
	Py_InitModule3("mpatch", methods, mpatch_doc);
	mpatch_Error = PyErr_NewException("mpatch.mpatchError", NULL, NULL);
}
#endif