revlog: use existing file handle when reading during _addrevision
_addrevision() may need to read from revlogs as part of computing
deltas. Previously, we would flush existing file handles and open
a new, short-lived file handle to perform the reading.
If we have an existing file handle, it seems logical to reuse it
for reading instead of opening a new file handle. This patch
makes that the new behavior.
After this patch, revlog files are only reopened when adding
revisions if the revlog is switched from inline to non-inline.
On Linux when unbundling a bundle of the mozilla-central repo, this
patch has the following impact on system call counts:
Call Before After Delta
write 827,639 673,390 -154,249
open 700,103 684,089 -16,014
read 74,489 74,489 0
fstat 493,924 461,896 -32,028
close 249,131 233,117 -16,014
stat 242,001 242,001 0
lstat 18,676 18,676 0
lseek 20,268 20,268 0
ioctl 14,652 13,173 -1,479
TOTAL 3,180,758 2,930,679 -250,079
It's worth noting that many of the open() calls fail due to missing
files. That's why there are many more open() calls than close().
Despite the significant system call reduction, this change does not
seem to have a significant performance impact on Linux.
On Windows 10 (not a VM, on a SSD), this patch appears to reduce
unbundle time for mozilla-central from ~960s to ~920s. This isn't
as significant as I was hoping. But a decrease it is nonetheless.
Still, Windows unbundle performance is still >2x slower than Linux.
Despite the lack of significant gains, fewer system calls is fewer
system calls. If nothing else, this will narrow the focus of potential
areas to optimize in the future.
$ hg init
$ mkdir d1 d1/d11 d2
$ echo d1/a > d1/a
$ echo d1/ba > d1/ba
$ echo d1/a1 > d1/d11/a1
$ echo d1/b > d1/b
$ echo d2/b > d2/b
$ hg add d1/a d1/b d1/ba d1/d11/a1 d2/b
$ hg commit -m "1"
rename a single file
$ hg rename d1/d11/a1 d2/c
$ hg --config ui.portablefilenames=abort rename d1/a d1/con.xml
abort: filename contains 'con', which is reserved on Windows: 'd1/con.xml'
[255]
$ hg sum
parent: 0:9b4b6e7b2c26 tip
1
branch: default
commit: 1 renamed
update: (current)
phases: 1 draft
$ hg status -C
A d2/c
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/c
rename a single file using absolute paths
$ hg rename `pwd`/d1/d11/a1 `pwd`/d2/c
$ hg status -C
A d2/c
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/c
rename --after a single file
$ mv d1/d11/a1 d2/c
$ hg rename --after d1/d11/a1 d2/c
$ hg status -C
A d2/c
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/c
rename --after a single file when src and tgt already tracked
$ mv d1/d11/a1 d2/c
$ hg addrem -s 0
removing d1/d11/a1
adding d2/c
$ hg rename --after d1/d11/a1 d2/c
$ hg status -C
A d2/c
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/c
rename --after a single file to a nonexistent target filename
$ hg rename --after d1/a dummy
d1/a: not recording move - dummy does not exist (glob)
move a single file to an existing directory
$ hg rename d1/d11/a1 d2
$ hg status -C
A d2/a1
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/a1
move --after a single file to an existing directory
$ mv d1/d11/a1 d2
$ hg rename --after d1/d11/a1 d2
$ hg status -C
A d2/a1
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/a1
rename a file using a relative path
$ (cd d1/d11; hg rename ../../d2/b e)
$ hg status -C
A d1/d11/e
d2/b
R d2/b
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/d11/e
rename --after a file using a relative path
$ (cd d1/d11; mv ../../d2/b e; hg rename --after ../../d2/b e)
$ hg status -C
A d1/d11/e
d2/b
R d2/b
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/d11/e
rename directory d1 as d3
$ hg rename d1/ d3
moving d1/a to d3/a (glob)
moving d1/b to d3/b (glob)
moving d1/ba to d3/ba (glob)
moving d1/d11/a1 to d3/d11/a1 (glob)
$ hg status -C
A d3/a
d1/a
A d3/b
d1/b
A d3/ba
d1/ba
A d3/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
rename --after directory d1 as d3
$ mv d1 d3
$ hg rename --after d1 d3
moving d1/a to d3/a (glob)
moving d1/b to d3/b (glob)
moving d1/ba to d3/ba (glob)
moving d1/d11/a1 to d3/d11/a1 (glob)
$ hg status -C
A d3/a
d1/a
A d3/b
d1/b
A d3/ba
d1/ba
A d3/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
move a directory using a relative path
$ (cd d2; mkdir d3; hg rename ../d1/d11 d3)
moving ../d1/d11/a1 to d3/d11/a1 (glob)
$ hg status -C
A d2/d3/d11/a1
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d2/d3
move --after a directory using a relative path
$ (cd d2; mkdir d3; mv ../d1/d11 d3; hg rename --after ../d1/d11 d3)
moving ../d1/d11/a1 to d3/d11/a1 (glob)
$ hg status -C
A d2/d3/d11/a1
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d2/d3
move directory d1/d11 to an existing directory d2 (removes empty d1)
$ hg rename d1/d11/ d2
moving d1/d11/a1 to d2/d11/a1 (glob)
$ hg status -C
A d2/d11/a1
d1/d11/a1
R d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d2/d11
move directories d1 and d2 to a new directory d3
$ mkdir d3
$ hg rename d1 d2 d3
moving d1/a to d3/d1/a (glob)
moving d1/b to d3/d1/b (glob)
moving d1/ba to d3/d1/ba (glob)
moving d1/d11/a1 to d3/d1/d11/a1 (glob)
moving d2/b to d3/d2/b (glob)
$ hg status -C
A d3/d1/a
d1/a
A d3/d1/b
d1/b
A d3/d1/ba
d1/ba
A d3/d1/d11/a1
d1/d11/a1
A d3/d2/b
d2/b
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
R d2/b
$ hg update -C
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
move --after directories d1 and d2 to a new directory d3
$ mkdir d3
$ mv d1 d2 d3
$ hg rename --after d1 d2 d3
moving d1/a to d3/d1/a (glob)
moving d1/b to d3/d1/b (glob)
moving d1/ba to d3/d1/ba (glob)
moving d1/d11/a1 to d3/d1/d11/a1 (glob)
moving d2/b to d3/d2/b (glob)
$ hg status -C
A d3/d1/a
d1/a
A d3/d1/b
d1/b
A d3/d1/ba
d1/ba
A d3/d1/d11/a1
d1/d11/a1
A d3/d2/b
d2/b
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
R d2/b
$ hg update -C
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
move everything under directory d1 to existing directory d2, do not
overwrite existing files (d2/b)
$ hg rename d1/* d2
d2/b: not overwriting - file exists
moving d1/d11/a1 to d2/d11/a1 (glob)
$ hg status -C
A d2/a
d1/a
A d2/ba
d1/ba
A d2/d11/a1
d1/d11/a1
R d1/a
R d1/ba
R d1/d11/a1
$ diff -u d1/b d2/b
--- d1/b * (glob)
+++ d2/b * (glob)
@@ * (glob)
-d1/b
+d2/b
[1]
$ hg update -C
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d2/a d2/ba d2/d11/a1
attempt to move one file into a non-existent directory
$ hg rename d1/a dx/
abort: destination dx/ is not a directory
[255]
$ hg status -C
$ hg update -C
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
attempt to move potentially more than one file into a non-existent directory
$ hg rename 'glob:d1/**' dx
abort: with multiple sources, destination must be an existing directory
[255]
move every file under d1 to d2/d21 (glob)
$ mkdir d2/d21
$ hg rename 'glob:d1/**' d2/d21
moving d1/a to d2/d21/a (glob)
moving d1/b to d2/d21/b (glob)
moving d1/ba to d2/d21/ba (glob)
moving d1/d11/a1 to d2/d21/a1 (glob)
$ hg status -C
A d2/d21/a
d1/a
A d2/d21/a1
d1/d11/a1
A d2/d21/b
d1/b
A d2/d21/ba
d1/ba
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d2/d21
move --after some files under d1 to d2/d21 (glob)
$ mkdir d2/d21
$ mv d1/a d1/d11/a1 d2/d21
$ hg rename --after 'glob:d1/**' d2/d21
moving d1/a to d2/d21/a (glob)
d1/b: not recording move - d2/d21/b does not exist (glob)
d1/ba: not recording move - d2/d21/ba does not exist (glob)
moving d1/d11/a1 to d2/d21/a1 (glob)
$ hg status -C
A d2/d21/a
d1/a
A d2/d21/a1
d1/d11/a1
R d1/a
R d1/d11/a1
$ hg update -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d2/d21
move every file under d1 starting with an 'a' to d2/d21 (regexp)
$ mkdir d2/d21
$ hg rename 're:d1/([^a][^/]*/)*a.*' d2/d21
moving d1/a to d2/d21/a (glob)
moving d1/d11/a1 to d2/d21/a1 (glob)
$ hg status -C
A d2/d21/a
d1/a
A d2/d21/a1
d1/d11/a1
R d1/a
R d1/d11/a1
$ hg update -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d2/d21
attempt to overwrite an existing file
$ echo "ca" > d1/ca
$ hg rename d1/ba d1/ca
d1/ca: not overwriting - file exists
$ hg status -C
? d1/ca
$ hg update -C
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
forced overwrite of an existing file
$ echo "ca" > d1/ca
$ hg rename --force d1/ba d1/ca
$ hg status -C
A d1/ca
d1/ba
R d1/ba
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/ca
attempt to overwrite an existing broken symlink
#if symlink
$ ln -s ba d1/ca
$ hg rename --traceback d1/ba d1/ca
d1/ca: not overwriting - file exists
$ hg status -C
? d1/ca
$ hg update -C
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/ca
replace a symlink with a file
$ ln -s ba d1/ca
$ hg rename --force d1/ba d1/ca
$ hg status -C
A d1/ca
d1/ba
R d1/ba
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/ca
#endif
do not copy more than one source file to the same destination file
$ mkdir d3
$ hg rename d1/* d2/* d3
moving d1/d11/a1 to d3/d11/a1 (glob)
d3/b: not overwriting - d2/b collides with d1/b
$ hg status -C
A d3/a
d1/a
A d3/b
d1/b
A d3/ba
d1/ba
A d3/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
move a whole subtree with "hg rename ."
$ mkdir d3
$ (cd d1; hg rename . ../d3)
moving a to ../d3/d1/a
moving b to ../d3/d1/b
moving ba to ../d3/d1/ba
moving d11/a1 to ../d3/d1/d11/a1 (glob)
$ hg status -C
A d3/d1/a
d1/a
A d3/d1/b
d1/b
A d3/d1/ba
d1/ba
A d3/d1/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
move a whole subtree with "hg rename --after ."
$ mkdir d3
$ mv d1/* d3
$ (cd d1; hg rename --after . ../d3)
moving a to ../d3/a
moving b to ../d3/b
moving ba to ../d3/ba
moving d11/a1 to ../d3/d11/a1 (glob)
$ hg status -C
A d3/a
d1/a
A d3/b
d1/b
A d3/ba
d1/ba
A d3/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
move the parent tree with "hg rename .."
$ (cd d1/d11; hg rename .. ../../d3)
moving ../a to ../../d3/a (glob)
moving ../b to ../../d3/b (glob)
moving ../ba to ../../d3/ba (glob)
moving a1 to ../../d3/d11/a1
$ hg status -C
A d3/a
d1/a
A d3/b
d1/b
A d3/ba
d1/ba
A d3/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
skip removed files
$ hg remove d1/b
$ hg rename d1 d3
moving d1/a to d3/a (glob)
moving d1/ba to d3/ba (glob)
moving d1/d11/a1 to d3/d11/a1 (glob)
$ hg status -C
A d3/a
d1/a
A d3/ba
d1/ba
A d3/d11/a1
d1/d11/a1
R d1/a
R d1/b
R d1/ba
R d1/d11/a1
$ hg update -C
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -rf d3
transitive rename
$ hg rename d1/b d1/bb
$ hg rename d1/bb d1/bc
$ hg status -C
A d1/bc
d1/b
R d1/b
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/bc
transitive rename --after
$ hg rename d1/b d1/bb
$ mv d1/bb d1/bc
$ hg rename --after d1/bb d1/bc
$ hg status -C
A d1/bc
d1/b
R d1/b
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/bc
$ echo "# idempotent renames (d1/b -> d1/bb followed by d1/bb -> d1/b)"
# idempotent renames (d1/b -> d1/bb followed by d1/bb -> d1/b)
$ hg rename d1/b d1/bb
$ echo "some stuff added to d1/bb" >> d1/bb
$ hg rename d1/bb d1/b
$ hg status -C
M d1/b
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
overwriting with renames (issue1959)
$ hg rename d1/a d1/c
$ hg rename d1/b d1/a
$ hg status -C
M d1/a
d1/b
A d1/c
d1/a
R d1/b
$ hg diff --git
diff --git a/d1/a b/d1/a
--- a/d1/a
+++ b/d1/a
@@ -1,1 +1,1 @@
-d1/a
+d1/b
diff --git a/d1/b b/d1/b
deleted file mode 100644
--- a/d1/b
+++ /dev/null
@@ -1,1 +0,0 @@
-d1/b
diff --git a/d1/a b/d1/c
copy from d1/a
copy to d1/c
$ hg update -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm d1/c # The file was marked as added, so 'hg update' action was 'forget'
check illegal path components
$ hg rename d1/d11/a1 .hg/foo
abort: path contains illegal component: .hg/foo (glob)
[255]
$ hg status -C
$ hg rename d1/d11/a1 ../foo
abort: ../foo not under root '$TESTTMP'
[255]
$ hg status -C
$ mv d1/d11/a1 .hg/foo
$ hg rename --after d1/d11/a1 .hg/foo
abort: path contains illegal component: .hg/foo (glob)
[255]
$ hg status -C
! d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm .hg/foo
$ hg rename d1/d11/a1 .hg
abort: path contains illegal component: .hg/a1 (glob)
[255]
$ hg --config extensions.largefiles= rename d1/d11/a1 .hg
abort: path contains illegal component: .hg/a1 (glob)
[255]
$ hg status -C
$ hg rename d1/d11/a1 ..
abort: ../a1 not under root '$TESTTMP' (glob)
[255]
$ hg --config extensions.largefiles= rename d1/d11/a1 ..
abort: ../a1 not under root '$TESTTMP' (glob)
[255]
$ hg status -C
$ mv d1/d11/a1 .hg
$ hg rename --after d1/d11/a1 .hg
abort: path contains illegal component: .hg/a1 (glob)
[255]
$ hg status -C
! d1/d11/a1
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm .hg/a1
$ (cd d1/d11; hg rename ../../d2/b ../../.hg/foo)
abort: path contains illegal component: .hg/foo (glob)
[255]
$ hg status -C
$ (cd d1/d11; hg rename ../../d2/b ../../../foo)
abort: ../../../foo not under root '$TESTTMP'
[255]
$ hg status -C