stream-clone: avoid opening a revlog in case we do not need it
Opening an revlog has a cost, especially if it is inline as we have to scan the
file and construct an index.
To prevent the associated slowdown, we just do a minimal scan to check that an
inline file is still inline, and simply stream the file without creating a
revlog when we can.
This provides a big boost compared to the previous changeset, even if the full
generation is still penalized by the initial gathering of information.
All benchmarks are run on linux with Python 3.10.7.
# benchmark.name = hg.exchange.stream.generate
# benchmark.variants.version = v2
### Compared to the previous changesets
We get a large win all across the board!
# mercurial-2018-08-01-zstd-sparse-revlog
before: 0.250694 seconds
after: 0.105986 seconds (-57.72%)
# pypy-2018-08-01-zstd-sparse-revlog
before: 3.885657 seconds
after: 1.709748 seconds (-56.00%)
# netbeans-2018-08-01-zstd-sparse-revlog
before: 16.679371 seconds
after: 7.687469 seconds (-53.91%)
# mozilla-central-2018-08-01-zstd-sparse-revlog
before: 38.575482 seconds
after: 17.520316 seconds (-54.58%)
# mozilla-try-2019-02-18-zstd-sparse-revlog
before: 81.160994 seconds
after: 37.073753 seconds (-54.32%)
### Compared to 6.4.3
We are still significantly slower than 6.4.3, the extra time is usually twice
slower than the extra time we observe on the locked section, which is a quite
interesting information.
Except for mercurial-central that is much faster. That discrepancy is not really
explained yet.
# mercurial-2018-08-01-zstd-sparse-revlog
6.4.3: 0.072560 seconds
after: 0.105986 seconds (+46.07%) (- 0.03 seconds)
# pypy-2018-08-01-zstd-sparse-revlog
6.4.3: 1.211193 seconds
after: 1.709748 seconds (+41.16%) (-0.45 seconds)
# netbeans-2018-08-01-zstd-sparse-revlog
6.4.3: 4.932843 seconds
after: 7.687469 seconds (+55.84%) (-2.75 seconds)
# mozilla-central-2018-08-01-zstd-sparse-revlog
6.4.3: 34.012226 seconds
after: 17.520316 seconds (-48.49%) (-16.49 seconds)
# mozilla-try-2019-02-18-zstd-sparse-revlog
6.4.3: 23.850555 seconds
after: 37.073753 seconds (+55.44%) (+13.22 seconds)
$ cat > correct.py <<NO_CHECK_EOF
> def toto(arg1, arg2):
> del arg2
> return (5 + 6, 9)
> NO_CHECK_EOF
$ cat > wrong.py <<NO_CHECK_EOF
> def toto( arg1, arg2):
> del(arg2)
> return ( 5+6, 9)
> def badwrap():
> return 1 + \\
> 2
> NO_CHECK_EOF
$ cat > quote.py <<NO_CHECK_EOF
> # let's use quote in comments
> (''' ( 4x5 )
> but """\\''' and finally''',
> """let's fool checkpatch""", '1+2',
> '"""', 42+1, """and
> ( 4-1 ) """, "( 1+1 )\" and ")
> a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
> NO_CHECK_EOF
$ cat > classstyle.py <<NO_CHECK_EOF
> class newstyle_class(object):
> pass
>
> class oldstyle_class:
> pass
>
> class empty():
> pass
>
> no_class = 1:
> pass
> NO_CHECK_EOF
$ check_code="$TESTDIR"/../contrib/check-code.py
$ "$check_code" ./wrong.py ./correct.py ./quote.py ./classstyle.py
./wrong.py:1:
> def toto( arg1, arg2):
gratuitous whitespace in () or []
./wrong.py:2:
> del(arg2)
Python keyword is not a function
./wrong.py:3:
> return ( 5+6, 9)
gratuitous whitespace in () or []
missing whitespace in expression
./wrong.py:5:
> return 1 + \
Use () to wrap long lines in Python, not \
./quote.py:5:
> '"""', 42+1, """and
missing whitespace in expression
[1]
$ cat > python3-compat.py << NO_CHECK_EOF
> foo <> bar
> reduce(lambda a, b: a + b, [1, 2, 3, 4])
> dict(key=value)
> NO_CHECK_EOF
$ "$check_code" python3-compat.py
python3-compat.py:1:
> foo <> bar
<> operator is not available in Python 3+, use !=
python3-compat.py:2:
> reduce(lambda a, b: a + b, [1, 2, 3, 4])
reduce is not available in Python 3+
python3-compat.py:3:
> dict(key=value)
dict() is different in Py2 and 3 and is slower than {}
[1]
$ cat > foo.c <<NO_CHECK_EOF
> void narf() {
> strcpy(foo, bar);
> // strcpy_s is okay, but this comment is not
> strcpy_s(foo, bar);
> }
> NO_CHECK_EOF
$ "$check_code" ./foo.c
./foo.c:2:
> strcpy(foo, bar);
don't use strcpy, use strlcpy or memcpy
./foo.c:3:
> // strcpy_s is okay, but this comment is not
don't use //-style comments
[1]
$ cat > is-op.py <<NO_CHECK_EOF
> # is-operator comparing number or string literal
> x = None
> y = x is 'foo'
> y = x is "foo"
> y = x is 5346
> y = x is -6
> y = x is not 'foo'
> y = x is not "foo"
> y = x is not 5346
> y = x is not -6
> NO_CHECK_EOF
$ "$check_code" ./is-op.py
./is-op.py:3:
> y = x is 'foo'
object comparison with literal
./is-op.py:4:
> y = x is "foo"
object comparison with literal
./is-op.py:5:
> y = x is 5346
object comparison with literal
./is-op.py:6:
> y = x is -6
object comparison with literal
./is-op.py:7:
> y = x is not 'foo'
object comparison with literal
./is-op.py:8:
> y = x is not "foo"
object comparison with literal
./is-op.py:9:
> y = x is not 5346
object comparison with literal
./is-op.py:10:
> y = x is not -6
object comparison with literal
[1]
$ cat > for-nolineno.py <<NO_CHECK_EOF
> except:
> NO_CHECK_EOF
$ "$check_code" for-nolineno.py --nolineno
for-nolineno.py:0:
> except:
naked except clause
[1]
$ cat > warning.t <<NO_CHECK_EOF
> $ function warnonly {
> > }
> $ diff -N aaa
> $ function onwarn {}
> NO_CHECK_EOF
$ "$check_code" warning.t
$ "$check_code" --warn warning.t
warning.t:1:
> $ function warnonly {
warning: don't use 'function', use old style
warning.t:3:
> $ diff -N aaa
warning: don't use 'diff -N'
warning.t:4:
> $ function onwarn {}
warning: don't use 'function', use old style
[1]
$ cat > error.t <<NO_CHECK_EOF
> $ [ foo == bar ]
> NO_CHECK_EOF
$ "$check_code" error.t
error.t:1:
> $ [ foo == bar ]
[ foo == bar ] is a bashism, use [ foo = bar ] instead
[1]
$ rm error.t
$ cat > raise-format.py <<NO_CHECK_EOF
> raise SomeException, message
> # this next line is okay
> raise SomeException(arg1, arg2)
> NO_CHECK_EOF
$ "$check_code" not-existing.py raise-format.py
Skipping*not-existing.py* (glob)
raise-format.py:1:
> raise SomeException, message
don't use old-style two-argument raise, use Exception(message)
[1]
$ cat <<NO_CHECK_EOF > tab.t
> indent
> > heredoc
> NO_CHECK_EOF
$ "$check_code" tab.t
tab.t:1:
> indent
don't use tabs to indent
[1]
$ rm tab.t
$ cat > rst.py <<NO_CHECK_EOF
> """problematic rst text
>
> .. note::
> wrong
> """
>
> '''
>
> .. note::
>
> valid
>
> new text
>
> .. note::
>
> also valid
> '''
>
> """mixed
>
> .. note::
>
> good
>
> .. note::
> plus bad
> """
> NO_CHECK_EOF
$ $check_code -w rst.py
rst.py:3:
> .. note::
warning: add two newlines after '.. note::'
rst.py:26:
> .. note::
warning: add two newlines after '.. note::'
[1]
$ cat > ./map-inside-gettext.py <<NO_CHECK_EOF
> print(_("map inside gettext %s" % v))
>
> print(_("concatenating " " by " " space %s" % v))
> print(_("concatenating " + " by " + " '+' %s" % v))
>
> print(_("mapping operation in different line %s"
> % v))
>
> print(_(
> "leading spaces inside of '(' %s" % v))
> NO_CHECK_EOF
$ "$check_code" ./map-inside-gettext.py
./map-inside-gettext.py:1:
> print(_("map inside gettext %s" % v))
don't use % inside _()
./map-inside-gettext.py:3:
> print(_("concatenating " " by " " space %s" % v))
don't use % inside _()
./map-inside-gettext.py:4:
> print(_("concatenating " + " by " + " '+' %s" % v))
don't use % inside _()
./map-inside-gettext.py:6:
> print(_("mapping operation in different line %s"
don't use % inside _()
./map-inside-gettext.py:9:
> print(_(
don't use % inside _()
[1]
web templates
$ mkdir -p mercurial/templates
$ cat > mercurial/templates/example.tmpl <<NO_CHECK_EOF
> {desc}
> {desc|escape}
> {desc|firstline}
> {desc|websub}
> NO_CHECK_EOF
$ "$check_code" --warnings mercurial/templates/example.tmpl
mercurial/templates/example.tmpl:2:
> {desc|escape}
warning: follow desc keyword with either firstline or websub
[1]
'string join across lines with no space' detection
$ cat > stringjoin.py <<NO_CHECK_EOF
> foo = (' foo'
> 'bar foo.'
> 'bar foo:'
> 'bar foo@'
> 'bar foo%'
> 'bar foo*'
> 'bar foo+'
> 'bar foo-'
> 'bar')
> NO_CHECK_EOF
'missing _() in ui message' detection
$ cat > uigettext.py <<NO_CHECK_EOF
> ui.status("% 10s %05d % -3.2f %*s %%"
> # this use '\\\\' instead of '\\', because the latter in
> # heredoc on shell becomes just '\'
> '\\\\ \n \t \0'
> """12345
> """
> '''.:*+-=
> ''' "%-6d \n 123456 .:*+-= foobar")
> NO_CHECK_EOF
superfluous pass
$ cat > superfluous_pass.py <<NO_CHECK_EOF
> # correct examples
> if foo:
> pass
> else:
> # comment-only line means still need pass
> pass
> def nothing():
> pass
> class empty(object):
> pass
> if whatever:
> passvalue(value)
> # bad examples
> if foo:
> "foo"
> pass
> else: # trailing comment doesn't fool checker
> wat()
> pass
> def nothing():
> "docstring means no pass"
> pass
> class empty(object):
> """multiline
> docstring also
> means no pass"""
> pass
> NO_CHECK_EOF
(Checking multiple invalid files at once examines whether caching
translation table for repquote() works as expected or not. All files
should break rules depending on result of repquote(), in this case)
$ "$check_code" stringjoin.py uigettext.py superfluous_pass.py
stringjoin.py:1:
> foo = (' foo'
string join across lines with no space
stringjoin.py:2:
> 'bar foo.'
string join across lines with no space
stringjoin.py:3:
> 'bar foo:'
string join across lines with no space
stringjoin.py:4:
> 'bar foo@'
string join across lines with no space
stringjoin.py:5:
> 'bar foo%'
string join across lines with no space
stringjoin.py:6:
> 'bar foo*'
string join across lines with no space
stringjoin.py:7:
> 'bar foo+'
string join across lines with no space
stringjoin.py:8:
> 'bar foo-'
string join across lines with no space
uigettext.py:1:
> ui.status("% 10s %05d % -3.2f %*s %%"
missing _() in ui message (use () to hide false-positives)
superfluous_pass.py:14:
> if foo:
omit superfluous pass
superfluous_pass.py:17:
> else: # trailing comment doesn't fool checker
omit superfluous pass
superfluous_pass.py:20:
> def nothing():
omit superfluous pass
superfluous_pass.py:23:
> class empty(object):
omit superfluous pass
[1]
Check code fragments embedded in test script
$ cat > embedded-code.t <<NO_CHECK_EOF
> code fragment in doctest style
> >>> x = (1,2)
> ...
> ... x = (1,2)
>
> code fragment in heredoc style
> $ python <<EOF
> > x = (1,2)
> > EOF
>
> code fragment in file heredoc style
> $ python > file.py <<EOF
> > x = (1,2)
> > EOF
> NO_CHECK_EOF
$ "$check_code" embedded-code.t
embedded-code.t:2:
> x = (1,2)
missing whitespace after ,
embedded-code.t:4:
> x = (1,2)
missing whitespace after ,
embedded-code.t:8:
> x = (1,2)
missing whitespace after ,
embedded-code.t:13:
> x = (1,2)
missing whitespace after ,
[1]
"max warnings per file" is shared by all embedded code fragments
$ "$check_code" --per-file=3 embedded-code.t
embedded-code.t:2:
> x = (1,2)
missing whitespace after ,
embedded-code.t:4:
> x = (1,2)
missing whitespace after ,
embedded-code.t:8:
> x = (1,2)
missing whitespace after ,
(too many errors, giving up)
[1]