view tests/test-histedit-no-change.t @ 28701:3bce3d2fd727

run-tests: make _processoutput picky about optional globs

1ad0ddf8cccc enabled lines that were not matched to be found later in cases of jitter.

Unfortunately, in this model an optional line would always jitter to the end when
it is not present. That is not ideal.

It would be possible to do better, by queuing all writes until the end in case
an optional line jitters, but for now, it is simpler to assume optional lines
have a fixed place in the stream.

test for old histedit issue #6:
editing a changeset without any actual change would corrupt the repository

  $ . "$TESTDIR/histedit-helpers.sh"

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > histedit=
  > EOF

  $ initrepo ()
  > {
  >     dir="$1"
  >     comment="$2"
  >     if [ -n "${comment}" ]; then
  >         echo % ${comment}
  >         echo % ${comment} | sed 's:.:-:g'
  >     fi
  >     hg init ${dir}
  >     cd ${dir}
  >     for x in a b c d e f ; do
  >         echo $x > $x
  >         hg add $x
  >         hg ci -m $x
  >     done
  >     cd ..
  > }

  $ geneditor ()
  > {
  >     # generate an editor script for selecting changesets to be edited
  >     choice=$1  # changesets that should be edited (using sed line ranges)
  >     cat <<EOF | sed 's:^....::'
  >     # editing the rules, replacing 'pick' with 'edit' for the chosen lines
  >     sed '${choice}s:^pick:edit:' "\$1" > "\${1}.tmp"
  >     mv "\${1}.tmp" "\$1"
  >     # displaying the resulting rules, minus comments and empty lines
  >     sed '/^#/d;/^$/d;s:^:| :' "\$1" >&2
  > EOF
  > }

  $ startediting ()
  > {
  >     # begin an editing session
  >     choice="$1"  # changesets that should be edited
  >     number="$2"  # number of changesets considered (from tip)
  >     comment="$3"
  >     geneditor "${choice}" > edit.sh
  >     echo % start editing the history ${comment}
  >     HGEDITOR="sh ./edit.sh" hg histedit -- -${number} 2>&1 | fixbundle
  > }

  $ continueediting ()
  > {
  >     # continue an edit already in progress
  >     editor="$1"  # message editor when finalizing editing
  >     comment="$2"
  >     echo % finalize changeset editing ${comment}
  >     HGEDITOR=${editor} hg histedit --continue 2>&1 | fixbundle
  > }

  $ graphlog ()
  > {
  >     comment="${1:-log}"
  >     echo % "${comment}"
  >     hg log -G --template '{rev} {node} \"{desc|firstline}\"\n'
  > }


  $ initrepo r1 "test editing with no change"
  % test editing with no change
  -----------------------------
  $ cd r1
  $ graphlog "log before editing"
  % log before editing
  @  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
  $ startediting 2 3 "(not changing anything)" # edit the 2nd of 3 changesets
  % start editing the history (not changing anything)
  | pick 055a42cdd887 3 d
  | edit e860deea161a 4 e
  | pick 652413bf663e 5 f
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  Editing (e860deea161a), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ continueediting true "(leaving commit message unaltered)"
  % finalize changeset editing (leaving commit message unaltered)


check state of working copy
  $ hg id
  794fe033d0a0 tip

  $ graphlog "log after history editing"
  % log after history editing
  @  5 794fe033d0a030f8df77c5de945fca35c9181c30 "f"
  |
  o  4 04d2fab980779f332dec458cc944f28de8b43435 "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

  $ cd ..

  $ initrepo r2 "test editing with no change, then abort"
  % test editing with no change, then abort
  -----------------------------------------
  $ cd r2
  $ graphlog "log before editing"
  % log before editing
  @  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
  $ startediting 1,2 3 "(not changing anything)" # edit the 1st two of 3 changesets
  % start editing the history (not changing anything)
  | edit 055a42cdd887 3 d
  | edit e860deea161a 4 e
  | pick 652413bf663e 5 f
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  Editing (055a42cdd887), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ continueediting true "(leaving commit message unaltered)"
  % finalize changeset editing (leaving commit message unaltered)
  Editing (e860deea161a), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ graphlog "log after first edit"
  % log after first edit
  @  6 e5ae3ca2f1ffdbd89ec41ebc273a231f7c3022f2 "d"
  |
  | o  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  | |
  | o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  | |
  | o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |/
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

abort editing session, after first forcibly updating away
  $ hg up 0
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ mv .hg/histedit-state .hg/histedit-state-ignore
  $ hg up 0
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ mv .hg/histedit-state-ignore .hg/histedit-state
  $ hg sum
  parent: 0:cb9a9f314b8b 
   a
  branch: default
  commit: 1 added, 1 unknown (new branch head)
  update: 6 new changesets (update)
  phases: 7 draft
  hist:   2 remaining (histedit --continue)

  $ hg histedit --abort 2>&1 | fixbundle

modified files should survive the abort when we've moved away already
  $ hg st
  A e
  ? edit.sh

  $ graphlog "log after abort"
  % log after abort
  o  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  @  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
aborting and not changing files can skip mentioning updating (no) files
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg commit --close-branch -m 'closebranch'
  $ startediting 1 1 "(not changing anything)" # edit the 3rd of 3 changesets
  % start editing the history (not changing anything)
  | edit 292aec348d9e 6 closebranch
  Editing (292aec348d9e), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ hg histedit --abort

  $ cd ..