view tests/test-status.t @ 26362:3bfc473f4d33

gitweb, monoblue: fix vertical align of spans in .sourcelines

Empty lines in file view could produce an inexplicable margin before the next
line (most noticeable in browsers on webkit/blink engine). That was making
empty lines seem taller than the rest.

Instead of using default vertical align, let's set it to 'top'.

This issue is actually present in paper, and only recently got into gitweb
(2239626369f5) and monoblue (119202d4d7a4). There's a bit more to it in paper,
so that will be dealt with in a future patch.

Recipe to see live: preferably using a webkit/blink browser, such as chromium,
browse a file with empty lines, e.g. https://selenic.com/hg/file/3.5/README#l8
Selecting a block of text that includes empty lines will reveal white "breaks"
in the selection. Highlighted line (#l8) also shows such a break below itself.

  $ hg init repo1
  $ cd repo1
  $ mkdir a b a/1 b/1 b/2
  $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2

hg status in repo root:

  $ hg status
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

hg status . in repo root:

  $ hg status .
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

  $ hg status --cwd a
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a .
  ? 1/in_a_1
  ? in_a
  $ hg status --cwd a ..
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root

  $ hg status --cwd b
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b .
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  $ hg status --cwd b ..
  ? ../a/1/in_a_1
  ? ../a/in_a
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  ? ../in_root

  $ hg status --cwd a/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a/1 .
  ? in_a_1
  $ hg status --cwd a/1 ..
  ? in_a_1
  ? ../in_a

  $ hg status --cwd b/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/1 .
  ? in_b_1
  $ hg status --cwd b/1 ..
  ? in_b_1
  ? ../2/in_b_2
  ? ../in_b

  $ hg status --cwd b/2
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/2 .
  ? in_b_2
  $ hg status --cwd b/2 ..
  ? ../1/in_b_1
  ? in_b_2
  ? ../in_b

combining patterns with root and patterns without a root works

  $ hg st a/in_a re:.*b$
  ? a/in_a
  ? b/in_b

  $ cd ..

  $ hg init repo2
  $ cd repo2
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg ci -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch modified added unknown ignored
  $ hg add added
  $ hg remove removed
  $ rm deleted

hg status:

  $ hg status
  A added
  R removed
  ! deleted
  ? unknown

hg status modified added removed deleted unknown never-existed ignored:

  $ hg status modified added removed deleted unknown never-existed ignored
  never-existed: * (glob)
  A added
  R removed
  ! deleted
  ? unknown

  $ hg copy modified copied

hg status -C:

  $ hg status -C
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown

hg status -A:

  $ hg status -A
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown
  I ignored
  C .hgignore
  C modified

  $ hg status -A -Tjson
  [
   {
    "path": "added",
    "status": "A"
   },
   {
    "copy": "modified",
    "path": "copied",
    "status": "A"
   },
   {
    "path": "removed",
    "status": "R"
   },
   {
    "path": "deleted",
    "status": "!"
   },
   {
    "path": "unknown",
    "status": "?"
   },
   {
    "path": "ignored",
    "status": "I"
   },
   {
    "path": ".hgignore",
    "status": "C"
   },
   {
    "path": "modified",
    "status": "C"
   }
  ]

  $ hg status -A -Tpickle > pickle
  >>> import pickle
  >>> print sorted((x['status'], x['path']) for x in pickle.load(open("pickle")))
  [('!', 'deleted'), ('?', 'pickle'), ('?', 'unknown'), ('A', 'added'), ('A', 'copied'), ('C', '.hgignore'), ('C', 'modified'), ('I', 'ignored'), ('R', 'removed')]
  $ rm pickle

  $ echo "^ignoreddir$" > .hgignore
  $ mkdir ignoreddir
  $ touch ignoreddir/file

Test templater support:

  $ hg status -AT "[{status}]\t{if(copy, '{copy} -> ')}{path}\n"
  [M]	.hgignore
  [A]	added
  [A]	modified -> copied
  [R]	removed
  [!]	deleted
  [?]	ignored
  [?]	unknown
  [I]	ignoreddir/file
  [C]	modified
  $ hg status -AT default
  M .hgignore
  A added
  A copied
    modified
  R removed
  ! deleted
  ? ignored
  ? unknown
  I ignoreddir/file
  C modified
  $ hg status -T compact
  abort: "status" not in template map
  [255]

hg status ignoreddir/file:

  $ hg status ignoreddir/file

hg status -i ignoreddir/file:

  $ hg status -i ignoreddir/file
  I ignoreddir/file
  $ cd ..

Check 'status -q' and some combinations

  $ hg init repo3
  $ cd repo3
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg commit -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch added unknown ignored
  $ hg add added
  $ echo "test" >> modified
  $ hg remove removed
  $ rm deleted
  $ hg copy modified copied

Specify working directory revision explicitly, that should be the same as
"hg status"

  $ hg status --change "wdir()"
  M modified
  A added
  A copied
  R removed
  ! deleted
  ? unknown

Run status with 2 different flags.
Check if result is the same or different.
If result is not as expected, raise error

  $ assert() {
  >     hg status $1 > ../a
  >     hg status $2 > ../b
  >     if diff ../a ../b > /dev/null; then
  >         out=0
  >     else
  >         out=1
  >     fi
  >     if [ $3 -eq 0 ]; then
  >         df="same"
  >     else
  >         df="different"
  >     fi
  >     if [ $out -ne $3 ]; then
  >         echo "Error on $1 and $2, should be $df."
  >     fi
  > }

Assert flag1 flag2 [0-same | 1-different]

  $ assert "-q" "-mard"      0
  $ assert "-A" "-marduicC"  0
  $ assert "-qA" "-mardcC"   0
  $ assert "-qAui" "-A"      0
  $ assert "-qAu" "-marducC" 0
  $ assert "-qAi" "-mardicC" 0
  $ assert "-qu" "-u"        0
  $ assert "-q" "-u"         1
  $ assert "-m" "-a"         1
  $ assert "-r" "-d"         1
  $ cd ..

  $ hg init repo4
  $ cd repo4
  $ touch modified removed deleted
  $ hg ci -q -A -m 'initial checkin'
  $ touch added unknown
  $ hg add added
  $ hg remove removed
  $ rm deleted
  $ echo x > modified
  $ hg copy modified copied
  $ hg ci -m 'test checkin' -d "1000001 0"
  $ rm *
  $ touch unrelated
  $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0"

hg status --change 1:

  $ hg status --change 1
  M modified
  A added
  A copied
  R removed

hg status --change 1 unrelated:

  $ hg status --change 1 unrelated

hg status -C --change 1 added modified copied removed deleted:

  $ hg status -C --change 1 added modified copied removed deleted
  M modified
  A added
  A copied
    modified
  R removed

hg status -A --change 1 and revset:

  $ hg status -A --change '1|1'
  M modified
  A added
  A copied
    modified
  R removed
  C deleted

  $ cd ..

hg status of binary file starting with '\1\n', a separator for metadata:

  $ hg init repo5
  $ cd repo5
  >>> open("010a", "wb").write("\1\nfoo")
  $ hg ci -q -A -m 'initial checkin'
  $ hg status -A
  C 010a

  >>> open("010a", "wb").write("\1\nbar")
  $ hg status -A
  M 010a
  $ hg ci -q -m 'modify 010a'
  $ hg status -A --rev 0:1
  M 010a

  $ touch empty
  $ hg ci -q -A -m 'add another file'
  $ hg status -A --rev 1:2 010a
  C 010a

  $ cd ..

test "hg status" with "directory pattern" which matches against files
only known on target revision.

  $ hg init repo6
  $ cd repo6

  $ echo a > a.txt
  $ hg add a.txt
  $ hg commit -m '#0'
  $ mkdir -p 1/2/3/4/5
  $ echo b > 1/2/3/4/5/b.txt
  $ hg add 1/2/3/4/5/b.txt
  $ hg commit -m '#1'

  $ hg update -C 0 > /dev/null
  $ hg status -A
  C a.txt

the directory matching against specified pattern should be removed,
because directory existence prevents 'dirstate.walk()' from showing
warning message about such pattern.

  $ test ! -d 1
  $ hg status -A --rev 1 1/2/3/4/5/b.txt
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3/4/5
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1
  R 1/2/3/4/5/b.txt

  $ hg status --config ui.formatdebug=True --rev 1 1
  status = [
      {*'path': '1/2/3/4/5/b.txt'*}, (glob)
  ]

#if windows
  $ hg --config ui.slash=false status -A --rev 1 1
  R 1\2\3\4\5\b.txt
#endif

  $ cd ..

Status after move overwriting a file (issue4458)
=================================================


  $ hg init issue4458
  $ cd issue4458
  $ echo a > a
  $ echo b > b
  $ hg commit -Am base
  adding a
  adding b


with --force

  $ hg mv b --force a
  $ hg st --copies
  M a
    b
  R b
  $ hg revert --all
  reverting a
  undeleting b
  $ rm *.orig

without force

  $ hg rm a
  $ hg st --copies
  R a
  $ hg mv b a
  $ hg st --copies
  M a
    b
  R b

using ui.statuscopies setting
  $ hg st --config ui.statuscopies=true
  M a
    b
  R b
  $ hg st --config ui.statuscopies=false
  M a
  R b

Other "bug" highlight, the revision status does not report the copy information.
This is buggy behavior.

  $ hg commit -m 'blah'
  $ hg st --copies --change .
  M a
  R b

  $ cd ..