wireprotov2: send linknodes to emitfilerevisions()
Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.
This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().
As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.
However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.
The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.
Differential Revision: https://phab.mercurial-scm.org/D5405
# githelp.py - Try to map Git commands to Mercurial equivalents.
#
# Copyright 2013 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""try mapping git commands to Mercurial commands
Tries to map a given git command to a Mercurial command:
$ hg githelp -- git checkout master
hg update master
If an unknown command or parameter combination is detected, an error is
produced.
"""
from __future__ import absolute_import
import getopt
import re
from mercurial.i18n import _
from mercurial import (
encoding,
error,
fancyopts,
registrar,
scmutil,
)
from mercurial.utils import (
procutil,
)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
cmdtable = {}
command = registrar.command(cmdtable)
def convert(s):
if s.startswith("origin/"):
return s[7:]
if 'HEAD' in s:
s = s.replace('HEAD', '.')
# HEAD~ in git is .~1 in mercurial
s = re.sub('~$', '~1', s)
return s
@command('githelp|git', [
], _('hg githelp'),
helpcategory=command.CATEGORY_HELP, helpbasic=True)
def githelp(ui, repo, *args, **kwargs):
'''suggests the Mercurial equivalent of the given git command
Usage: hg githelp -- <git command>
'''
if len(args) == 0 or (len(args) == 1 and args[0] =='git'):
raise error.Abort(_('missing git command - '
'usage: hg githelp -- <git command>'))
if args[0] == 'git':
args = args[1:]
cmd = args[0]
if not cmd in gitcommands:
raise error.Abort(_("error: unknown git command %s") % (cmd))
ui.pager('githelp')
args = args[1:]
return gitcommands[cmd](ui, repo, *args, **kwargs)
def parseoptions(ui, cmdoptions, args):
cmdoptions = list(cmdoptions)
opts = {}
args = list(args)
while True:
try:
args = fancyopts.fancyopts(list(args), cmdoptions, opts, True)
break
except getopt.GetoptError as ex:
flag = None
if "requires argument" in ex.msg:
raise
if ('--' + ex.opt) in ex.msg:
flag = '--' + ex.opt
elif ('-' + ex.opt) in ex.msg:
flag = '-' + ex.opt
else:
raise error.Abort(_("unknown option %s") % ex.opt)
try:
args.remove(flag)
except Exception:
msg = _("unknown option '%s' packed with other options")
hint = _("please try passing the option as its own flag: -%s")
raise error.Abort(msg % ex.opt, hint=hint % ex.opt)
ui.warn(_("ignoring unknown option %s\n") % flag)
args = list([convert(x) for x in args])
opts = dict([(k, convert(v)) if isinstance(v, str) else (k, v)
for k, v in opts.iteritems()])
return args, opts
class Command(object):
def __init__(self, name):
self.name = name
self.args = []
self.opts = {}
def __bytes__(self):
cmd = "hg " + self.name
if self.opts:
for k, values in sorted(self.opts.iteritems()):
for v in values:
if v:
cmd += " %s %s" % (k, v)
else:
cmd += " %s" % (k,)
if self.args:
cmd += " "
cmd += " ".join(self.args)
return cmd
__str__ = encoding.strmethod(__bytes__)
def append(self, value):
self.args.append(value)
def extend(self, values):
self.args.extend(values)
def __setitem__(self, key, value):
values = self.opts.setdefault(key, [])
values.append(value)
def __and__(self, other):
return AndCommand(self, other)
class AndCommand(object):
def __init__(self, left, right):
self.left = left
self.right = right
def __str__(self):
return "%s && %s" % (self.left, self.right)
def __and__(self, other):
return AndCommand(self, other)
def add(ui, repo, *args, **kwargs):
cmdoptions = [
('A', 'all', None, ''),
('p', 'patch', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if (opts.get('patch')):
ui.status(_("note: Mercurial will commit when complete, "
"as there is no staging area in Mercurial\n\n"))
cmd = Command('commit --interactive')
else:
cmd = Command("add")
if not opts.get('all'):
cmd.extend(args)
else:
ui.status(_("note: use hg addremove to remove files that have "
"been deleted\n\n"))
ui.status((bytes(cmd)), "\n")
def am(ui, repo, *args, **kwargs):
cmdoptions=[
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('import')
ui.status(bytes(cmd), "\n")
def apply(ui, repo, *args, **kwargs):
cmdoptions = [
('p', 'p', int, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('import --no-commit')
if (opts.get('p')):
cmd['-p'] = opts.get('p')
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def bisect(ui, repo, *args, **kwargs):
ui.status(_("see 'hg help bisect' for how to use bisect\n\n"))
def blame(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('annotate -udl')
cmd.extend([convert(v) for v in args])
ui.status((bytes(cmd)), "\n")
def branch(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'set-upstream', None, ''),
('', 'set-upstream-to', '', ''),
('d', 'delete', None, ''),
('D', 'delete', None, ''),
('m', 'move', None, ''),
('M', 'move', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command("bookmark")
if opts.get('set_upstream') or opts.get('set_upstream_to'):
ui.status(_("Mercurial has no concept of upstream branches\n"))
return
elif opts.get('delete'):
cmd = Command("strip")
for branch in args:
cmd['-B'] = branch
else:
cmd['-B'] = None
elif opts.get('move'):
if len(args) > 0:
if len(args) > 1:
old = args.pop(0)
else:
# shell command to output the active bookmark for the active
# revision
old = '`hg log -T"{activebookmark}" -r .`'
else:
raise error.Abort(_('missing newbranch argument'))
new = args[0]
cmd['-m'] = old
cmd.append(new)
else:
if len(args) > 1:
cmd['-r'] = args[1]
cmd.append(args[0])
elif len(args) == 1:
cmd.append(args[0])
ui.status((bytes(cmd)), "\n")
def ispath(repo, string):
"""
The first argument to git checkout can either be a revision or a path. Let's
generally assume it's a revision, unless it's obviously a path. There are
too many ways to spell revisions in git for us to reasonably catch all of
them, so let's be conservative.
"""
if scmutil.isrevsymbol(repo, string):
# if it's definitely a revision let's not even check if a file of the
# same name exists.
return False
cwd = repo.getcwd()
if cwd == '':
repopath = string
else:
repopath = cwd + '/' + string
exists = repo.wvfs.exists(repopath)
if exists:
return True
manifest = repo['.'].manifest()
didexist = (repopath in manifest) or manifest.hasdir(repopath)
return didexist
def checkout(ui, repo, *args, **kwargs):
cmdoptions = [
('b', 'branch', '', ''),
('B', 'branch', '', ''),
('f', 'force', None, ''),
('p', 'patch', None, ''),
]
paths = []
if '--' in args:
sepindex = args.index('--')
paths.extend(args[sepindex + 1:])
args = args[:sepindex]
args, opts = parseoptions(ui, cmdoptions, args)
rev = None
if args and ispath(repo, args[0]):
paths = args + paths
elif args:
rev = args[0]
paths = args[1:] + paths
cmd = Command('update')
if opts.get('force'):
if paths or rev:
cmd['-C'] = None
if opts.get('patch'):
cmd = Command('revert')
cmd['-i'] = None
if opts.get('branch'):
if len(args) == 0:
cmd = Command('bookmark')
cmd.append(opts.get('branch'))
else:
cmd.append(args[0])
bookcmd = Command('bookmark')
bookcmd.append(opts.get('branch'))
cmd = cmd & bookcmd
# if there is any path argument supplied, use revert instead of update
elif len(paths) > 0:
ui.status(_("note: use --no-backup to avoid creating .orig files\n\n"))
cmd = Command('revert')
if opts.get('patch'):
cmd['-i'] = None
if rev:
cmd['-r'] = rev
cmd.extend(paths)
elif rev:
if opts.get('patch'):
cmd['-r'] = rev
else:
cmd.append(rev)
elif opts.get('force'):
cmd = Command('revert')
cmd['--all'] = None
else:
raise error.Abort(_("a commit must be specified"))
ui.status((bytes(cmd)), "\n")
def cherrypick(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'continue', None, ''),
('', 'abort', None, ''),
('e', 'edit', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('graft')
if opts.get('edit'):
cmd['--edit'] = None
if opts.get('continue'):
cmd['--continue'] = None
elif opts.get('abort'):
ui.status(_("note: hg graft does not have --abort\n\n"))
return
else:
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def clean(ui, repo, *args, **kwargs):
cmdoptions = [
('d', 'd', None, ''),
('f', 'force', None, ''),
('x', 'x', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('purge')
if opts.get('x'):
cmd['--all'] = None
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def clone(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'bare', None, ''),
('n', 'no-checkout', None, ''),
('b', 'branch', '', ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if len(args) == 0:
raise error.Abort(_("a repository to clone must be specified"))
cmd = Command('clone')
cmd.append(args[0])
if len(args) > 1:
cmd.append(args[1])
if opts.get('bare'):
cmd['-U'] = None
ui.status(_("note: Mercurial does not have bare clones. "
"-U will clone the repo without checking out a commit\n\n"))
elif opts.get('no_checkout'):
cmd['-U'] = None
if opts.get('branch'):
cocmd = Command("update")
cocmd.append(opts.get('branch'))
cmd = cmd & cocmd
ui.status((bytes(cmd)), "\n")
def commit(ui, repo, *args, **kwargs):
cmdoptions = [
('a', 'all', None, ''),
('m', 'message', '', ''),
('p', 'patch', None, ''),
('C', 'reuse-message', '', ''),
('F', 'file', '', ''),
('', 'author', '', ''),
('', 'date', '', ''),
('', 'amend', None, ''),
('', 'no-edit', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('commit')
if opts.get('patch'):
cmd = Command('commit --interactive')
if opts.get('amend'):
if opts.get('no_edit'):
cmd = Command('amend')
else:
cmd['--amend'] = None
if opts.get('reuse_message'):
cmd['-M'] = opts.get('reuse_message')
if opts.get('message'):
cmd['-m'] = "'%s'" % (opts.get('message'),)
if opts.get('all'):
ui.status(_("note: Mercurial doesn't have a staging area, "
"so there is no --all. -A will add and remove files "
"for you though.\n\n"))
if opts.get('file'):
cmd['-l'] = opts.get('file')
if opts.get('author'):
cmd['-u'] = opts.get('author')
if opts.get('date'):
cmd['-d'] = opts.get('date')
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def deprecated(ui, repo, *args, **kwargs):
ui.warn(_('this command has been deprecated in the git project, '
'thus isn\'t supported by this tool\n\n'))
def diff(ui, repo, *args, **kwargs):
cmdoptions = [
('a', 'all', None, ''),
('', 'cached', None, ''),
('R', 'reverse', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('diff')
if opts.get('cached'):
ui.status(_('note: Mercurial has no concept of a staging area, '
'so --cached does nothing\n\n'))
if opts.get('reverse'):
cmd['--reverse'] = None
for a in list(args):
args.remove(a)
try:
repo.revs(a)
cmd['-r'] = a
except Exception:
cmd.append(a)
ui.status((bytes(cmd)), "\n")
def difftool(ui, repo, *args, **kwargs):
ui.status(_('Mercurial does not enable external difftool by default. You '
'need to enable the extdiff extension in your .hgrc file by adding\n'
'extdiff =\n'
'to the [extensions] section and then running\n\n'
'hg extdiff -p <program>\n\n'
'See \'hg help extdiff\' and \'hg help -e extdiff\' for more '
'information.\n'))
def fetch(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'all', None, ''),
('f', 'force', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('pull')
if len(args) > 0:
cmd.append(args[0])
if len(args) > 1:
ui.status(_("note: Mercurial doesn't have refspecs. "
"-r can be used to specify which commits you want to "
"pull. -B can be used to specify which bookmark you "
"want to pull.\n\n"))
for v in args[1:]:
if v in repo._bookmarks:
cmd['-B'] = v
else:
cmd['-r'] = v
ui.status((bytes(cmd)), "\n")
def grep(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('grep')
# For basic usage, git grep and hg grep are the same. They both have the
# pattern first, followed by paths.
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def init(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('init')
if len(args) > 0:
cmd.append(args[0])
ui.status((bytes(cmd)), "\n")
def log(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'follow', None, ''),
('', 'decorate', None, ''),
('n', 'number', '', ''),
('1', '1', None, ''),
('', 'pretty', '', ''),
('', 'format', '', ''),
('', 'oneline', None, ''),
('', 'stat', None, ''),
('', 'graph', None, ''),
('p', 'patch', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
ui.status(_('note: -v prints the entire commit message like Git does. To '
'print just the first line, drop the -v.\n\n'))
ui.status(_("note: see hg help revset for information on how to filter "
"log output\n\n"))
cmd = Command('log')
cmd['-v'] = None
if opts.get('number'):
cmd['-l'] = opts.get('number')
if opts.get('1'):
cmd['-l'] = '1'
if opts.get('stat'):
cmd['--stat'] = None
if opts.get('graph'):
cmd['-G'] = None
if opts.get('patch'):
cmd['-p'] = None
if opts.get('pretty') or opts.get('format') or opts.get('oneline'):
format = opts.get('format', '')
if 'format:' in format:
ui.status(_("note: --format format:??? equates to Mercurial's "
"--template. See hg help templates for more info.\n\n"))
cmd['--template'] = '???'
else:
ui.status(_("note: --pretty/format/oneline equate to Mercurial's "
"--style or --template. See hg help templates for "
"more info.\n\n"))
cmd['--style'] = '???'
if len(args) > 0:
if '..' in args[0]:
since, until = args[0].split('..')
cmd['-r'] = "'%s::%s'" % (since, until)
del args[0]
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def lsfiles(ui, repo, *args, **kwargs):
cmdoptions = [
('c', 'cached', None, ''),
('d', 'deleted', None, ''),
('m', 'modified', None, ''),
('o', 'others', None, ''),
('i', 'ignored', None, ''),
('s', 'stage', None, ''),
('z', '_zero', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if (opts.get('modified') or opts.get('deleted')
or opts.get('others') or opts.get('ignored')):
cmd = Command('status')
if opts.get('deleted'):
cmd['-d'] = None
if opts.get('modified'):
cmd['-m'] = None
if opts.get('others'):
cmd['-o'] = None
if opts.get('ignored'):
cmd['-i'] = None
else:
cmd = Command('files')
if opts.get('stage'):
ui.status(_("note: Mercurial doesn't have a staging area, ignoring "
"--stage\n"))
if opts.get('_zero'):
cmd['-0'] = None
cmd.append('.')
for include in args:
cmd['-I'] = procutil.shellquote(include)
ui.status((bytes(cmd)), "\n")
def merge(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('merge')
if len(args) > 0:
cmd.append(args[len(args) - 1])
ui.status((bytes(cmd)), "\n")
def mergebase(ui, repo, *args, **kwargs):
cmdoptions = []
args, opts = parseoptions(ui, cmdoptions, args)
if len(args) != 2:
args = ['A', 'B']
cmd = Command("log -T '{node}\\n' -r 'ancestor(%s,%s)'"
% (args[0], args[1]))
ui.status(_('note: ancestors() is part of the revset language\n'),
_("(learn more about revsets with 'hg help revsets')\n\n"))
ui.status((bytes(cmd)), "\n")
def mergetool(ui, repo, *args, **kwargs):
cmdoptions = []
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command("resolve")
if len(args) == 0:
cmd['--all'] = None
cmd.extend(args)
ui.status((bytes(cmd)), "\n")
def mv(ui, repo, *args, **kwargs):
cmdoptions = [
('f', 'force', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('mv')
cmd.extend(args)
if opts.get('force'):
cmd['-f'] = None
ui.status((bytes(cmd)), "\n")
def pull(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'all', None, ''),
('f', 'force', None, ''),
('r', 'rebase', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('pull')
cmd['--rebase'] = None
if len(args) > 0:
cmd.append(args[0])
if len(args) > 1:
ui.status(_("note: Mercurial doesn't have refspecs. "
"-r can be used to specify which commits you want to "
"pull. -B can be used to specify which bookmark you "
"want to pull.\n\n"))
for v in args[1:]:
if v in repo._bookmarks:
cmd['-B'] = v
else:
cmd['-r'] = v
ui.status((bytes(cmd)), "\n")
def push(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'all', None, ''),
('f', 'force', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('push')
if len(args) > 0:
cmd.append(args[0])
if len(args) > 1:
ui.status(_("note: Mercurial doesn't have refspecs. "
"-r can be used to specify which commits you want "
"to push. -B can be used to specify which bookmark "
"you want to push.\n\n"))
for v in args[1:]:
if v in repo._bookmarks:
cmd['-B'] = v
else:
cmd['-r'] = v
if opts.get('force'):
cmd['-f'] = None
ui.status((bytes(cmd)), "\n")
def rebase(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'all', None, ''),
('i', 'interactive', None, ''),
('', 'onto', '', ''),
('', 'abort', None, ''),
('', 'continue', None, ''),
('', 'skip', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if opts.get('interactive'):
ui.status(_("note: hg histedit does not perform a rebase. "
"It just edits history.\n\n"))
cmd = Command('histedit')
if len(args) > 0:
ui.status(_("also note: 'hg histedit' will automatically detect"
" your stack, so no second argument is necessary\n\n"))
ui.status((bytes(cmd)), "\n")
return
if opts.get('skip'):
cmd = Command('revert --all -r .')
ui.status((bytes(cmd)), "\n")
cmd = Command('rebase')
if opts.get('continue') or opts.get('skip'):
cmd['--continue'] = None
if opts.get('abort'):
cmd['--abort'] = None
if opts.get('onto'):
ui.status(_("note: if you're trying to lift a commit off one branch, "
"try hg rebase -d <destination commit> -s <commit to be "
"lifted>\n\n"))
cmd['-d'] = convert(opts.get('onto'))
if len(args) < 2:
raise error.Abort(_("expected format: git rebase --onto X Y Z"))
cmd['-s'] = "'::%s - ::%s'" % (convert(args[1]), convert(args[0]))
else:
if len(args) == 1:
cmd['-d'] = convert(args[0])
elif len(args) == 2:
cmd['-d'] = convert(args[0])
cmd['-b'] = convert(args[1])
ui.status((bytes(cmd)), "\n")
def reflog(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'all', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('journal')
if opts.get('all'):
cmd['--all'] = None
if len(args) > 0:
cmd.append(args[0])
ui.status(bytes(cmd), "\n\n")
ui.status(_("note: in hg commits can be deleted from repo but we always"
" have backups\n"))
def reset(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'soft', None, ''),
('', 'hard', None, ''),
('', 'mixed', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
commit = convert(args[0] if len(args) > 0 else '.')
hard = opts.get('hard')
if opts.get('mixed'):
ui.status(_('note: --mixed has no meaning since Mercurial has no '
'staging area\n\n'))
if opts.get('soft'):
ui.status(_('note: --soft has no meaning since Mercurial has no '
'staging area\n\n'))
cmd = Command('update')
if hard:
cmd.append('--clean')
cmd.append(commit)
ui.status((bytes(cmd)), "\n")
def revert(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
if len(args) > 1:
ui.status(_("note: hg backout doesn't support multiple commits at "
"once\n\n"))
cmd = Command('backout')
if args:
cmd.append(args[0])
ui.status((bytes(cmd)), "\n")
def revparse(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'show-cdup', None, ''),
('', 'show-toplevel', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if opts.get('show_cdup') or opts.get('show_toplevel'):
cmd = Command('root')
if opts.get('show_cdup'):
ui.status(_("note: hg root prints the root of the repository\n\n"))
ui.status((bytes(cmd)), "\n")
else:
ui.status(_("note: see hg help revset for how to refer to commits\n"))
def rm(ui, repo, *args, **kwargs):
cmdoptions = [
('f', 'force', None, ''),
('n', 'dry-run', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('rm')
cmd.extend(args)
if opts.get('force'):
cmd['-f'] = None
if opts.get('dry_run'):
cmd['-n'] = None
ui.status((bytes(cmd)), "\n")
def show(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'name-status', None, ''),
('', 'pretty', '', ''),
('U', 'unified', int, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if opts.get('name_status'):
if opts.get('pretty') == 'format:':
cmd = Command('status')
cmd['--change'] = '.'
else:
cmd = Command('log')
cmd.append('--style status')
cmd.append('-r .')
elif len(args) > 0:
if ispath(repo, args[0]):
cmd = Command('cat')
else:
cmd = Command('export')
cmd.extend(args)
if opts.get('unified'):
cmd.append('--config diff.unified=%d' % (opts['unified'],))
elif opts.get('unified'):
cmd = Command('export')
cmd.append('--config diff.unified=%d' % (opts['unified'],))
else:
cmd = Command('export')
ui.status((bytes(cmd)), "\n")
def stash(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('shelve')
action = args[0] if len(args) > 0 else None
if action == 'list':
cmd['-l'] = None
elif action == 'drop':
cmd['-d'] = None
if len(args) > 1:
cmd.append(args[1])
else:
cmd.append('<shelve name>')
elif action == 'pop' or action == 'apply':
cmd = Command('unshelve')
if len(args) > 1:
cmd.append(args[1])
if action == 'apply':
cmd['--keep'] = None
elif (action == 'branch' or action == 'show' or action == 'clear'
or action == 'create'):
ui.status(_("note: Mercurial doesn't have equivalents to the "
"git stash branch, show, clear, or create actions\n\n"))
return
else:
if len(args) > 0:
if args[0] != 'save':
cmd['--name'] = args[0]
elif len(args) > 1:
cmd['--name'] = args[1]
ui.status((bytes(cmd)), "\n")
def status(ui, repo, *args, **kwargs):
cmdoptions = [
('', 'ignored', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('status')
cmd.extend(args)
if opts.get('ignored'):
cmd['-i'] = None
ui.status((bytes(cmd)), "\n")
def svn(ui, repo, *args, **kwargs):
if not args:
raise error.Abort(_('missing svn command'))
svncmd = args[0]
if svncmd not in gitsvncommands:
raise error.Abort(_('unknown git svn command "%s"') % (svncmd))
args = args[1:]
return gitsvncommands[svncmd](ui, repo, *args, **kwargs)
def svndcommit(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('push')
ui.status((bytes(cmd)), "\n")
def svnfetch(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
cmd = Command('pull')
cmd.append('default-push')
ui.status((bytes(cmd)), "\n")
def svnfindrev(ui, repo, *args, **kwargs):
cmdoptions = [
]
args, opts = parseoptions(ui, cmdoptions, args)
if not args:
raise error.Abort(_('missing find-rev argument'))
cmd = Command('log')
cmd['-r'] = args[0]
ui.status((bytes(cmd)), "\n")
def svnrebase(ui, repo, *args, **kwargs):
cmdoptions = [
('l', 'local', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
pullcmd = Command('pull')
pullcmd.append('default-push')
rebasecmd = Command('rebase')
rebasecmd.append('tip')
cmd = pullcmd & rebasecmd
ui.status((bytes(cmd)), "\n")
def tag(ui, repo, *args, **kwargs):
cmdoptions = [
('f', 'force', None, ''),
('l', 'list', None, ''),
('d', 'delete', None, ''),
]
args, opts = parseoptions(ui, cmdoptions, args)
if opts.get('list'):
cmd = Command('tags')
else:
cmd = Command('tag')
if not args:
raise error.Abort(_('missing tag argument'))
cmd.append(args[0])
if len(args) > 1:
cmd['-r'] = args[1]
if opts.get('delete'):
cmd['--remove'] = None
if opts.get('force'):
cmd['-f'] = None
ui.status((bytes(cmd)), "\n")
gitcommands = {
'add': add,
'am': am,
'apply': apply,
'bisect': bisect,
'blame': blame,
'branch': branch,
'checkout': checkout,
'cherry-pick': cherrypick,
'clean': clean,
'clone': clone,
'commit': commit,
'diff': diff,
'difftool': difftool,
'fetch': fetch,
'grep': grep,
'init': init,
'log': log,
'ls-files': lsfiles,
'merge': merge,
'merge-base': mergebase,
'mergetool': mergetool,
'mv': mv,
'pull': pull,
'push': push,
'rebase': rebase,
'reflog': reflog,
'reset': reset,
'revert': revert,
'rev-parse': revparse,
'rm': rm,
'show': show,
'stash': stash,
'status': status,
'svn': svn,
'tag': tag,
'whatchanged': deprecated,
}
gitsvncommands = {
'dcommit': svndcommit,
'fetch': svnfetch,
'find-rev': svnfindrev,
'rebase': svnrebase,
}