view tests/test-audit-path.t @ 40923:3ed77780f4a6

wireprotov2: send linknodes to emitfilerevisions()

Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.

This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().

As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.

However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.

The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.

Differential Revision: https://phab.mercurial-scm.org/D5405

The simple store doesn't escape paths robustly and can't store paths
with periods, etc. So much of this test fails with it.
#require no-reposimplestore

  $ hg init

audit of .hg

  $ hg add .hg/00changelog.i
  abort: path contains illegal component: .hg/00changelog.i
  [255]

#if symlink

Symlinks

  $ mkdir a
  $ echo a > a/a
  $ hg ci -Ama
  adding a/a
  $ ln -s a b
  $ echo b > a/b
  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]
  $ hg add b

should still fail - maybe

  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]

  $ hg commit -m 'add symlink b'


Test symlink traversing when accessing history:
-----------------------------------------------

(build a changeset where the path exists as a directory)

  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkdir b
  $ echo c > b/a
  $ hg add b/a
  $ hg ci -m 'add directory b'
  created new head

Test that hg cat does not do anything wrong the working copy has 'b' as directory

  $ hg cat b/a
  c
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

Test that hg cat does not do anything wrong the working copy has 'b' as a symlink (issue4749)

  $ hg up 'desc(symlink)'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg cat b/a
  b/a: no such file in rev bc151a1f53bd
  [1]
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

#endif


unbundle tampered bundle

  $ hg init target
  $ cd target
  $ hg unbundle "$TESTDIR/bundles/tampered.hg"
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 6 files (+4 heads)
  new changesets b7da9bf6b037:fc1393d727bc (5 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)

attack .hg/test

  $ hg manifest -r0
  .hg/test
  $ hg update -Cr0
  abort: path contains illegal component: .hg/test
  [255]

attack foo/.hg/test

  $ hg manifest -r1
  foo/.hg/test
  $ hg update -Cr1
  abort: path 'foo/.hg/test' is inside nested repo 'foo'
  [255]

attack back/test where back symlinks to ..

  $ hg manifest -r2
  back
  back/test
#if symlink
  $ hg update -Cr2
  abort: path 'back/test' traverses symbolic link 'back'
  [255]
#else
('back' will be a file and cause some other system specific error)
  $ hg update -Cr2
  abort: $TESTTMP/target/back/test: $ENOTDIR$
  [255]
#endif

attack ../test

  $ hg manifest -r3
  ../test
  $ mkdir ../test
  $ echo data > ../test/file
  $ hg update -Cr3
  abort: path contains illegal component: ../test
  [255]
  $ cat ../test/file
  data

attack /tmp/test

  $ hg manifest -r4
  /tmp/test
  $ hg update -Cr4
  abort: path contains illegal component: /tmp/test
  [255]

  $ cd ..

Test symlink traversal on merge:
--------------------------------

#if symlink

set up symlink hell

  $ mkdir merge-symlink-out
  $ hg init merge-symlink
  $ cd merge-symlink
  $ touch base
  $ hg commit -qAm base
  $ ln -s ../merge-symlink-out a
  $ hg commit -qAm 'symlink a -> ../merge-symlink-out'
  $ hg up -q 0
  $ mkdir a
  $ touch a/poisoned
  $ hg commit -qAm 'file a/poisoned'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: file a/poisoned
  |
  | o  1: symlink a -> ../merge-symlink-out
  |/
  o  0: base
  

try trivial merge

  $ hg up -qC 1
  $ hg merge 2
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]

try rebase onto other revision: cache of audited paths should be discarded,
and the rebase should fail (issue5628)

  $ hg up -qC 2
  $ hg rebase -s 2 -d 1 --config extensions.rebase=
  rebasing 2:e73c21d6b244 "file a/poisoned" (tip)
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]
  $ ls ../merge-symlink-out

  $ cd ..

Test symlink traversal on update:
---------------------------------

  $ mkdir update-symlink-out
  $ hg init update-symlink
  $ cd update-symlink
  $ ln -s ../update-symlink-out a
  $ hg commit -qAm 'symlink a -> ../update-symlink-out'
  $ hg rm a
  $ mkdir a && touch a/b
  $ hg ci -qAm 'file a/b' a/b
  $ hg up -qC 0
  $ hg rm a
  $ mkdir a && touch a/c
  $ hg ci -qAm 'rm a, file a/c'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: rm a, file a/c
  |
  | o  1: file a/b
  |/
  o  0: symlink a -> ../update-symlink-out
  

try linear update where symlink already exists:

  $ hg up -qC 0
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]

try linear update including symlinked directory and its content: paths are
audited first by calculateupdates(), where no symlink is created so both
'a' and 'a/b' are taken as good paths. still applyupdates() should fail.

  $ hg up -qC null
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

try branch update replacing directory with symlink, and its content: the
path 'a' is audited as a directory first, which should be audited again as
a symlink.

  $ rm -f a
  $ hg up -qC 2
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

  $ cd ..

#endif