view tests/test-conflict.t @ 40923:3ed77780f4a6

wireprotov2: send linknodes to emitfilerevisions()

Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.

This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().

As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.

However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.

The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.

Differential Revision: https://phab.mercurial-scm.org/D5405

  $ hg init
  $ cat << EOF > a
  > Small Mathematical Series.
  > One
  > Two
  > Three
  > Four
  > Five
  > Hop we are done.
  > EOF
  $ hg add a
  $ hg commit -m ancestor
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 5
  > Hop we are done.
  > EOF
  $ hg commit -m branch1
  $ hg co 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 6
  > 8
  > Hop we are done.
  > EOF
  $ hg commit -m branch2
  created new head

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ hg id
  618808747361+c0c68e4fe667+ tip

  $ echo "[commands]" >> $HGRCPATH
  $ echo "status.verbose=true" >> $HGRCPATH
  $ hg status
  M a
  ? a.orig
  # The repository is in an unfinished *merge* state.
  
  # Unresolved merge conflicts:
  # 
  #     a
  # 
  # To mark files as resolved:  hg resolve --mark FILE
  
  # To continue:    hg commit
  # To abort:       hg merge --abort
  
  $ hg status -Tjson
  [
   {
    "path": "a",
    "status": "M"
   },
   {
    "path": "a.orig",
    "status": "?"
   }
  ]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 618808747361 - test: branch2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    c0c68e4fe667 - test: branch1
  Hop we are done.

  $ hg status --config commands.status.verbose=0
  M a
  ? a.orig

Verify custom conflict markers

  $ hg up -q --clean .
  $ cat <<EOF >> .hg/hgrc
  > [ui]
  > mergemarkertemplate = '{author} {rev}'
  > EOF

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line splitting of custom conflict marker which causes multiple lines

  $ hg up -q --clean .
  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
  > EOF

  $ hg -q merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line trimming of custom conflict marker using multi-byte characters

  $ hg up -q --clean .
  $ "$PYTHON" <<EOF
  > fp = open('logfile', 'wb')
  > fp.write(b'12345678901234567890123456789012345678901234567890' +
  >          b'1234567890') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ hg add logfile
  $ hg --encoding utf-8 commit --logfile logfile

  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={desc|firstline}
  > EOF

  $ hg -q --encoding utf-8 merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    branch1
  Hop we are done.

Verify basic conflict markers

  $ hg up -q --clean 2
  $ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy
  6
  8
  =======
  4
  5
  >>>>>>> merge rev
  Hop we are done.

internal:merge3

  $ hg up -q --clean .

  $ hg merge 1 --tool internal:merge3
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat a
  Small Mathematical Series.
  <<<<<<< working copy
  1
  2
  3
  6
  8
  ||||||| base
  One
  Two
  Three
  Four
  Five
  =======
  1
  2
  3
  4
  5
  >>>>>>> merge rev
  Hop we are done.

Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other

  $ hg up -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
  1 other heads for branch "default"
  $ printf "\n\nEnd of file\n" >> a
  $ hg ci -m "Add some stuff at the end"
  $ hg up -r 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ printf "Start of file\n\n\n" > tmp
  $ cat a >> tmp
  $ mv tmp a
  $ hg ci -m "Add some stuff at the beginning"

Now test :merge-other and :merge-local

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg resolve --tool :merge-other a
  merging a
  (no more unresolved files)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  6
  8
  Hop we are done.
  
  
  End of file

  $ hg up -C
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  updated to "18b51d585961: Add some stuff at the beginning"
  1 other heads for branch "default"
  $ hg merge --tool :merge-local
  merging a
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  4
  5
  Hop we are done.
  
  
  End of file