view tests/test-mq-eol.t @ 40923:3ed77780f4a6

wireprotov2: send linknodes to emitfilerevisions()

Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.

This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().

As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.

However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.

The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.

Differential Revision: https://phab.mercurial-scm.org/D5405

Test interactions between mq and patch.eol


  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [diff]
  > nodates = 1
  > EOF

  $ cat > makepatch.py <<EOF
  > f = open('eol.diff', 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-b\r\n')
  > w(b'+y\r\n')
  > w(b' c\r\n')
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in open(sys.argv[1], 'rb'):
  >     line = line.replace(b'\r', b'<CR>')
  >     line = line.replace(b'\n', b'<LF>')
  >     print(line)
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ "$PYTHON" ../cateol.py .hg/patches/eol.diff
  # HG changeset patch<LF>
  # Parent  0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..