view tests/test-narrow-exchange.t @ 40923:3ed77780f4a6

wireprotov2: send linknodes to emitfilerevisions()

Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.

This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().

As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.

However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.

The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.

Differential Revision: https://phab.mercurial-scm.org/D5405

#testcases lfs-on lfs-off

#if lfs-on
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs =
  > EOF
#endif

  $ . "$TESTDIR/narrow-library.sh"

create full repo

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 1 > inside/f
  $ mkdir inside2
  $ echo 1 > inside2/f
  $ mkdir outside
  $ echo 1 > outside/f
  $ hg ci -Aqm 'initial'

  $ echo 2 > inside/f
  $ hg ci -qm 'inside 2'

  $ echo 2 > inside2/f
  $ hg ci -qm 'inside2 2'

  $ echo 2 > outside/f
  $ hg ci -qm 'outside 2'

  $ cd ..

  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone --narrow ssh://user@dummy/master narrow2 --include inside --include inside2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Can push to wider repo if change does not affect paths in wider repo that are
not also in narrower repo

  $ cd narrow
  $ echo 3 > inside/f
  $ hg ci -m 'inside 3'
  $ hg push ssh://user@dummy/narrow2
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrower repo if change affects only paths within remote's
narrow spec

  $ cd ../narrow2
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ hg co -r 'desc("inside 3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 4 > inside/f
  $ hg ci -m 'inside 4'
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrow repo if change affects only paths outside remote's
narrow spec

  $ echo 3 > inside2/f
  $ hg ci -m 'inside2 3'
TODO: this should be successful
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: transaction abort!
  remote: rollback completed
  remote: abort: data/inside2/f.i@4a1aa07735e6: unknown parent! (reporevlogstore !)
  remote: abort: data/inside2/f/index@4a1aa07735e6: no node! (reposimplestore !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4)
  [255]

Can pull from wider repo if change affects only paths outside remote's
narrow spec
  $ echo 4 > inside2/f
  $ hg ci -m 'inside2 4'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg log -G -T '{rev} {node|short} {files}\n'
  o  4 ba3480e2f9de inside/f
  |
  @  3 4e5edd526618 inside/f
  |
  o  2 81e7e07b7ab0 outside/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ hg pull ssh://user@dummy/narrow2
  pulling from ssh://user@dummy/narrow2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets d78a96df731d
  (run 'hg update' to get a working copy)

Check that the resulting history is valid in the full repo

  $ cd ../narrow2
  $ hg push ssh://user@dummy/master
  pushing to ssh://user@dummy/master
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 4 changes to 2 files
  $ cd ../master
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 8 changesets with 10 changes to 3 files

Can not push to wider repo if change affects paths in wider repo that are
not also in narrower repo
  $ cd ../master
  $ hg co -r 'desc("inside2 4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 5 > inside2/f
  $ hg ci -m 'inside2 5'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  8 5970befb64ba inside2/f
  |
  o  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets * (glob)
  (run 'hg update' to get a working copy)
TODO: this should tell the user that their narrow clone does not have the
necessary content to be able to push to the target

TODO: lfs shouldn't abort like this
  $ hg push ssh://user@dummy/narrow2 || true
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 0 changes to 0 files
  remote: error: pretxnchangegroup.lfs hook raised an exception: data/inside2/f.i@f59b4e021835: no match found (lfs-on !)
  remote: transaction abort! (lfs-on !)
  remote: rollback completed (lfs-on !)
  remote: abort: data/inside2/f.i@f59b4e021835: no match found! (lfs-on !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4) (lfs-on !)