wireprotov2: send linknodes to emitfilerevisions()
Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.
This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().
As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.
However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.
The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.
Differential Revision: https://phab.mercurial-scm.org/D5405
$ cat >> fakepager.py <<EOF
> import sys
> printed = False
> for line in sys.stdin:
> sys.stdout.write('paged! %r\n' % line)
> printed = True
> if not printed:
> sys.stdout.write('paged empty output!\n')
> EOF
Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
$ cat >> $HGRCPATH <<EOF
> [ui]
> formatted = yes
> color = no
> [pager]
> pager = "$PYTHON" $TESTTMP/fakepager.py
> EOF
$ hg init repo
$ cd repo
$ echo a >> a
$ hg add a
$ hg ci -m 'add a'
$ for x in `"$PYTHON" $TESTDIR/seq.py 1 10`; do
> echo a $x >> a
> hg ci -m "modify a $x"
> done
By default diff and log are paged, but id is not:
$ hg diff -c 2 --pager=yes
paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
paged! '@@ -1,2 +1,3 @@\n'
paged! ' a\n'
paged! ' a 1\n'
paged! '+a 2\n'
$ hg log --limit 2
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
paged! 'changeset: 9:6dd8ea7dd621\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 9\n'
paged! '\n'
$ hg id
46106edeeb38 tip
We can control the pager from the config
$ hg log --limit 1 --config 'ui.paginate=False'
changeset: 10:46106edeeb38
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
$ hg log --limit 1 --config 'ui.paginate=0'
changeset: 10:46106edeeb38
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
$ hg log --limit 1 --config 'ui.paginate=1'
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
explicit --pager=on should take precedence over other configurations
(issue5580)
$ cat >> $HGRCPATH <<EOF
> [ui]
> paginate = false
> EOF
$ hg log --limit 1 --pager=on
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
$ cat >> $HGRCPATH <<EOF
> [ui]
> # true is default value of ui.paginate
> paginate = true
> EOF
$ hg log --limit 1 --pager=off
changeset: 10:46106edeeb38
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
We can enable the pager on id:
BROKEN: should be paged
$ hg --config pager.attend-id=yes id
46106edeeb38 tip
Setting attend-$COMMAND to a false value works, even with pager in
core:
$ hg --config pager.attend-diff=no diff -c 2
diff -r f4be7687d414 -r bce265549556 a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +1,3 @@
a
a 1
+a 2
Command aliases should have same behavior as main command
$ hg history --limit 2
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
paged! 'changeset: 9:6dd8ea7dd621\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 9\n'
paged! '\n'
Abbreviated command alias should also be paged
$ hg hist -l 1
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
Attend for an abbreviated command does not work
$ hg --config pager.attend-ident=true ident
46106edeeb38 tip
$ hg --config extensions.pager= --config pager.attend-ident=true ident
46106edeeb38 tip
Pager should not start if stdout is not a tty.
$ hg log -l1 -q --config ui.formatted=False
10:46106edeeb38
Pager should be disabled if pager.pager is empty (otherwise the output would
be silently lost.)
$ hg log -l1 -q --config pager.pager=
10:46106edeeb38
Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
$ cat >> $HGRCPATH <<EOF
> [ui]
> color = always
> [color]
> mode = ansi
> EOF
$ hg log --limit 3
paged! '\x1b[0;33mchangeset: 10:46106edeeb38\x1b[0m\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
paged! '\x1b[0;33mchangeset: 9:6dd8ea7dd621\x1b[0m\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 9\n'
paged! '\n'
paged! '\x1b[0;33mchangeset: 8:cff05a6312fe\x1b[0m\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 8\n'
paged! '\n'
#if no-chg
An invalid pager command name is reported sensibly if we don't have to
use shell=True in the subprocess call:
$ hg log --limit 3 --config pager.pager=this-command-better-never-exist
missing pager command 'this-command-better-never-exist', skipping pager
\x1b[0;33mchangeset: 10:46106edeeb38\x1b[0m (esc)
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
\x1b[0;33mchangeset: 9:6dd8ea7dd621\x1b[0m (esc)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 9
\x1b[0;33mchangeset: 8:cff05a6312fe\x1b[0m (esc)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 8
#endif
A complicated pager command gets worse behavior. Bonus points if you can
improve this.
$ hg log --limit 3 \
> --config pager.pager='this-command-better-never-exist --seriously' \
> 2>/dev/null || true
Pager works with shell aliases.
$ cat >> $HGRCPATH <<EOF
> [alias]
> echoa = !echo a
> EOF
$ hg echoa
a
BROKEN: should be paged
$ hg --config pager.attend-echoa=yes echoa
a
Pager works with hg aliases including environment variables.
$ cat >> $HGRCPATH <<'EOF'
> [alias]
> printa = log -T "$A\n" -r 0
> EOF
$ A=1 hg --config pager.attend-printa=yes printa
paged! '1\n'
$ A=2 hg --config pager.attend-printa=yes printa
paged! '2\n'
Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
$ A=2 hg --config pager.attend-printa=yes printa --pager=no
2
Pager should not override the exit code of other commands
$ cat >> $TESTTMP/fortytwo.py <<'EOF'
> from mercurial import commands, registrar
> cmdtable = {}
> command = registrar.command(cmdtable)
> @command(b'fortytwo', [], b'fortytwo', norepo=True)
> def fortytwo(ui, *opts):
> ui.write(b'42\n')
> return 42
> EOF
$ cat >> $HGRCPATH <<'EOF'
> [extensions]
> fortytwo = $TESTTMP/fortytwo.py
> EOF
$ hg fortytwo --pager=on
paged! '42\n'
[42]
A command that asks for paging using ui.pager() directly works:
$ hg blame a
paged! ' 0: a\n'
paged! ' 1: a 1\n'
paged! ' 2: a 2\n'
paged! ' 3: a 3\n'
paged! ' 4: a 4\n'
paged! ' 5: a 5\n'
paged! ' 6: a 6\n'
paged! ' 7: a 7\n'
paged! ' 8: a 8\n'
paged! ' 9: a 9\n'
paged! '10: a 10\n'
but not with HGPLAIN
$ HGPLAIN=1 hg blame a
0: a
1: a 1
2: a 2
3: a 3
4: a 4
5: a 5
6: a 6
7: a 7
8: a 8
9: a 9
10: a 10
explicit flags work too:
$ hg blame --pager=no a
0: a
1: a 1
2: a 2
3: a 3
4: a 4
5: a 5
6: a 6
7: a 7
8: a 8
9: a 9
10: a 10
A command with --output option:
$ hg cat -r0 a
paged! 'a\n'
$ hg cat -r0 a --output=-
paged! 'a\n'
$ hg cat -r0 a --output=out
$ hg export -r0
paged! '# HG changeset patch\n'
paged! '# User test\n'
paged! '# Date 0 0\n'
paged! '# Thu Jan 01 00:00:00 1970 +0000\n'
paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
paged! '# Parent 0000000000000000000000000000000000000000\n'
paged! 'add a\n'
paged! '\n'
paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
paged! '\x1b[0;32m+a\x1b[0m\n'
$ hg export -r0 -o -
paged! '# HG changeset patch\n'
paged! '# User test\n'
paged! '# Date 0 0\n'
paged! '# Thu Jan 01 00:00:00 1970 +0000\n'
paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
paged! '# Parent 0000000000000000000000000000000000000000\n'
paged! 'add a\n'
paged! '\n'
paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
paged! '\x1b[0;32m+a\x1b[0m\n'
$ hg export -r0 -o out
$ rm out
Put annotate in the ignore list for pager:
$ cat >> $HGRCPATH <<EOF
> [pager]
> ignore = annotate
> EOF
$ hg blame a
0: a
1: a 1
2: a 2
3: a 3
4: a 4
5: a 5
6: a 6
7: a 7
8: a 8
9: a 9
10: a 10
During pushbuffer, pager should not start:
$ cat > $TESTTMP/pushbufferpager.py <<EOF
> def uisetup(ui):
> ui.pushbuffer()
> ui.pager(b'mycmd')
> ui.write(b'content\n')
> ui.write(ui.popbuffer())
> EOF
$ echo append >> a
$ hg --config extensions.pushbuffer=$TESTTMP/pushbufferpager.py status --color=off
content
paged! 'M a\n'
Environment variables like LESS and LV are set automatically:
$ cat > $TESTTMP/printlesslv.py <<EOF
> from __future__ import absolute_import
> import os
> import sys
> sys.stdin.read()
> for name in ['LESS', 'LV']:
> sys.stdout.write(('%s=%s\n') % (name, os.environ.get(name, '-')))
> sys.stdout.flush()
> EOF
$ cat >> $HGRCPATH <<EOF
> [alias]
> noop = log -r 0 -T ''
> [ui]
> formatted=1
> [pager]
> pager = "$PYTHON" $TESTTMP/printlesslv.py
> EOF
$ unset LESS
$ unset LV
$ hg noop --pager=on
LESS=FRX
LV=-c
$ LESS=EFGH hg noop --pager=on
LESS=EFGH
LV=-c