view tests/test-remotefilelog-prefetch.t @ 40923:3ed77780f4a6

wireprotov2: send linknodes to emitfilerevisions()

Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.

This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().

As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.

However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.

The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.

Differential Revision: https://phab.mercurial-scm.org/D5405

#require no-windows

  $ . "$TESTDIR/remotefilelog-library.sh"

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [remotefilelog]
  > server=True
  > EOF
  $ echo x > x
  $ echo z > z
  $ hg commit -qAm x
  $ echo x2 > x
  $ echo y > y
  $ hg commit -qAm y
  $ hg bookmark foo

  $ cd ..

# prefetch a revision

  $ hgcloneshallow ssh://user@dummy/master shallow --noupdate
  streaming all changes
  2 files to transfer, 528 bytes of data
  transferred 528 bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  $ cd shallow

  $ hg prefetch -r 0
  2 files fetched over 1 fetches - (2 misses, 0.00% hit ratio) over *s (glob)

  $ hg cat -r 0 x
  x

# prefetch with base

  $ clearcache
  $ hg prefetch -r 0::1 -b 0
  2 files fetched over 1 fetches - (2 misses, 0.00% hit ratio) over *s (glob)

  $ hg cat -r 1 x
  x2
  $ hg cat -r 1 y
  y

  $ hg cat -r 0 x
  x
  1 files fetched over 1 fetches - (1 misses, 0.00% hit ratio) over *s (glob)

  $ hg cat -r 0 z
  z
  1 files fetched over 1 fetches - (1 misses, 0.00% hit ratio) over *s (glob)

  $ hg prefetch -r 0::1 --base 0
  $ hg prefetch -r 0::1 -b 1
  $ hg prefetch -r 0::1

# prefetch a range of revisions

  $ clearcache
  $ hg prefetch -r 0::1
  4 files fetched over 1 fetches - (4 misses, 0.00% hit ratio) over *s (glob)

  $ hg cat -r 0 x
  x
  $ hg cat -r 1 x
  x2

# prefetch certain files

  $ clearcache
  $ hg prefetch -r 1 x
  1 files fetched over 1 fetches - (1 misses, 0.00% hit ratio) over *s (glob)

  $ hg cat -r 1 x
  x2

  $ hg cat -r 1 y
  y
  1 files fetched over 1 fetches - (1 misses, 0.00% hit ratio) over *s (glob)

# prefetch on pull when configured

  $ printf "[remotefilelog]\npullprefetch=bookmark()\n" >> .hg/hgrc
  $ hg strip tip
  saved backup bundle to $TESTTMP/shallow/.hg/strip-backup/109c3a557a73-3f43405e-backup.hg (glob)

  $ clearcache
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  updating bookmark foo
  new changesets 109c3a557a73
  (run 'hg update' to get a working copy)
  prefetching file contents
  3 files fetched over 1 fetches - (3 misses, 0.00% hit ratio) over *s (glob)

  $ hg up tip
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

# prefetch only fetches changes not in working copy

  $ hg strip tip
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/shallow/.hg/strip-backup/109c3a557a73-3f43405e-backup.hg (glob)
  1 files fetched over 1 fetches - (1 misses, 0.00% hit ratio) over *s (glob)
  $ clearcache

  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  updating bookmark foo
  new changesets 109c3a557a73
  (run 'hg update' to get a working copy)
  prefetching file contents
  2 files fetched over 1 fetches - (2 misses, 0.00% hit ratio) over *s (glob)

# Make some local commits that produce the same file versions as are on the
# server. To simulate a situation where we have local commits that were somehow
# pushed, and we will soon pull.

  $ hg prefetch -r 'all()'
  2 files fetched over 1 fetches - (2 misses, 0.00% hit ratio) over *s (glob)
  $ hg strip -q -r 0
  $ echo x > x
  $ echo z > z
  $ hg commit -qAm x
  $ echo x2 > x
  $ echo y > y
  $ hg commit -qAm y

# prefetch server versions, even if local versions are available

  $ clearcache
  $ hg strip -q tip
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  updating bookmark foo
  new changesets 109c3a557a73
  1 local changesets published (?)
  (run 'hg update' to get a working copy)
  prefetching file contents
  2 files fetched over 1 fetches - (2 misses, 0.00% hit ratio) over *s (glob)

  $ cd ..

# Prefetch unknown files during checkout

  $ hgcloneshallow ssh://user@dummy/master shallow2
  streaming all changes
  2 files to transfer, 528 bytes of data
  transferred 528 bytes in * seconds * (glob)
  searching for changes
  no changes found
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  1 files fetched over 1 fetches - (1 misses, 0.00% hit ratio) over * (glob)
  $ cd shallow2
  $ hg up -q null
  $ echo x > x
  $ echo y > y
  $ echo z > z
  $ clearcache
  $ hg up tip
  x: untracked file differs
  3 files fetched over 1 fetches - (3 misses, 0.00% hit ratio) over * (glob)
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ hg revert --all

# Test batch fetching of lookup files during hg status
  $ hg up --clean tip
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg debugrebuilddirstate
  $ clearcache
  $ hg status
  3 files fetched over 1 fetches - (3 misses, 0.00% hit ratio) over * (glob)

# Prefetch during addrename detection
  $ hg up -q --clean tip
  $ hg revert --all
  $ mv x x2
  $ mv y y2
  $ mv z z2
  $ clearcache
  $ hg addremove -s 50 > /dev/null
  3 files fetched over 1 fetches - (3 misses, 0.00% hit ratio) over * (glob)
  $ hg revert --all
  forgetting x2
  forgetting y2
  forgetting z2
  undeleting x
  undeleting y
  undeleting z


# Revert across double renames. Note: the scary "abort", error is because
# https://bz.mercurial-scm.org/5419 .

  $ cd ../master
  $ hg mv z z2
  $ hg commit -m 'move z -> z2'
  $ cd ../shallow2
  $ hg pull -q
  $ clearcache
  $ hg mv y y2
  y2: not overwriting - file exists
  ('hg rename --after' to record the rename)
  [1]
  $ hg mv x x2
  x2: not overwriting - file exists
  ('hg rename --after' to record the rename)
  [1]
  $ hg mv z2 z3
  z2: not copying - file is not managed
  abort: no files to copy
  [255]
  $ hg revert -a -r 1 || true
  3 files fetched over 1 fetches - (3 misses, 0.00% hit ratio) over * (glob)
  abort: z2@109c3a557a73: not found in manifest! (?)