Mercurial > hg
view tests/test-revert-interactive.t @ 40923:3ed77780f4a6
wireprotov2: send linknodes to emitfilerevisions()
Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.
This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().
As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.
However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.
The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.
Differential Revision: https://phab.mercurial-scm.org/D5405
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Mon, 10 Dec 2018 18:04:12 +0000 |
parents | 1cbe19eb496d |
children | d783c937aa53 |
line wrap: on
line source
Revert interactive tests 1 add and commit file f 2 add commit file folder1/g 3 add and commit file folder2/h 4 add and commit file folder1/i 5 commit change to file f 6 commit changes to files folder1/g folder2/h 7 commit changes to files folder1/g folder2/h 8 revert interactive to commit id 2 (line 3 above), check that folder1/i is removed and 9 make workdir match 7 10 run the same test than 8 from within folder1 and check same expectations $ cat <<EOF >> $HGRCPATH > [ui] > interactive = true > [extensions] > record = > purge = > EOF $ mkdir -p a/folder1 a/folder2 $ cd a $ hg init >>> open('f', 'wb').write(b"1\n2\n3\n4\n5\n") and None $ hg add f ; hg commit -m "adding f" $ cat f > folder1/g ; hg add folder1/g ; hg commit -m "adding folder1/g" $ cat f > folder2/h ; hg add folder2/h ; hg commit -m "adding folder2/h" $ cat f > folder1/i ; hg add folder1/i ; hg commit -m "adding folder1/i" >>> open('f', 'wb').write(b"a\n1\n2\n3\n4\n5\nb\n") and None $ hg commit -m "modifying f" >>> open('folder1/g', 'wb').write(b"c\n1\n2\n3\n4\n5\nd\n") and None $ hg commit -m "modifying folder1/g" >>> open('folder2/h', 'wb').write(b"e\n1\n2\n3\n4\n5\nf\n") and None $ hg commit -m "modifying folder2/h" $ hg tip changeset: 6:59dd6e4ab63a tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: modifying folder2/h $ hg revert -i -r 2 --all -- << EOF > y > y > y > y > y > ? > y > n > n > EOF remove added file folder1/i (Yn)? y removing folder1/i diff --git a/f b/f 2 hunks, 2 lines changed examine changes to 'f'? [Ynesfdaq?] y @@ -1,6 +1,5 @@ -a 1 2 3 4 5 apply change 1/6 to 'f'? [Ynesfdaq?] y @@ -2,6 +1,5 @@ 1 2 3 4 5 -b apply change 2/6 to 'f'? [Ynesfdaq?] y diff --git a/folder1/g b/folder1/g 2 hunks, 2 lines changed examine changes to 'folder1/g'? [Ynesfdaq?] y @@ -1,6 +1,5 @@ -c 1 2 3 4 5 apply change 3/6 to 'folder1/g'? [Ynesfdaq?] ? y - yes, apply this change n - no, skip this change e - edit this change manually s - skip remaining changes to this file f - apply remaining changes to this file d - done, skip remaining changes and files a - apply all changes to all remaining files q - quit, applying no changes ? - ? (display help) apply change 3/6 to 'folder1/g'? [Ynesfdaq?] y @@ -2,6 +1,5 @@ 1 2 3 4 5 -d apply change 4/6 to 'folder1/g'? [Ynesfdaq?] n diff --git a/folder2/h b/folder2/h 2 hunks, 2 lines changed examine changes to 'folder2/h'? [Ynesfdaq?] n reverting f reverting folder1/g $ cat f 1 2 3 4 5 $ cat folder1/g 1 2 3 4 5 d $ cat folder2/h e 1 2 3 4 5 f Test that --interactive lift the need for --all $ echo q | hg revert -i -r 2 diff --git a/folder1/g b/folder1/g 1 hunks, 1 lines changed examine changes to 'folder1/g'? [Ynesfdaq?] q abort: user quit [255] $ ls folder1/ g Test that a noop revert doesn't do an unnecessary backup $ (echo y; echo n) | hg revert -i -r 2 folder1/g diff --git a/folder1/g b/folder1/g 1 hunks, 1 lines changed examine changes to 'folder1/g'? [Ynesfdaq?] y @@ -3,4 +3,3 @@ 3 4 5 -d apply this change to 'folder1/g'? [Ynesfdaq?] n $ ls folder1/ g Test --no-backup $ (echo y; echo y) | hg revert -i -C -r 2 folder1/g diff --git a/folder1/g b/folder1/g 1 hunks, 1 lines changed examine changes to 'folder1/g'? [Ynesfdaq?] y @@ -3,4 +3,3 @@ 3 4 5 -d apply this change to 'folder1/g'? [Ynesfdaq?] y $ ls folder1/ g >>> open('folder1/g', 'wb').write(b"1\n2\n3\n4\n5\nd\n") and None $ hg update -C 6 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg revert -i -r 2 --all -- << EOF > n > y > y > y > y > y > n > n > EOF remove added file folder1/i (Yn)? n diff --git a/f b/f 2 hunks, 2 lines changed examine changes to 'f'? [Ynesfdaq?] y @@ -1,6 +1,5 @@ -a 1 2 3 4 5 apply change 1/6 to 'f'? [Ynesfdaq?] y @@ -2,6 +1,5 @@ 1 2 3 4 5 -b apply change 2/6 to 'f'? [Ynesfdaq?] y diff --git a/folder1/g b/folder1/g 2 hunks, 2 lines changed examine changes to 'folder1/g'? [Ynesfdaq?] y @@ -1,6 +1,5 @@ -c 1 2 3 4 5 apply change 3/6 to 'folder1/g'? [Ynesfdaq?] y @@ -2,6 +1,5 @@ 1 2 3 4 5 -d apply change 4/6 to 'folder1/g'? [Ynesfdaq?] n diff --git a/folder2/h b/folder2/h 2 hunks, 2 lines changed examine changes to 'folder2/h'? [Ynesfdaq?] n reverting f reverting folder1/g $ cat f 1 2 3 4 5 $ cat folder1/g 1 2 3 4 5 d $ cat folder2/h e 1 2 3 4 5 f $ hg st M f M folder1/g $ hg revert --interactive f << EOF > y > ? > y > n > n > EOF diff --git a/f b/f 2 hunks, 2 lines changed examine changes to 'f'? [Ynesfdaq?] y @@ -1,6 +1,5 @@ -a 1 2 3 4 5 discard change 1/2 to 'f'? [Ynesfdaq?] ? y - yes, discard this change n - no, skip this change e - edit this change manually s - skip remaining changes to this file f - discard remaining changes to this file d - done, skip remaining changes and files a - discard all changes to all remaining files q - quit, discarding no changes ? - ? (display help) discard change 1/2 to 'f'? [Ynesfdaq?] y @@ -2,6 +1,5 @@ 1 2 3 4 5 -b discard change 2/2 to 'f'? [Ynesfdaq?] n $ hg st M f M folder1/g ? f.orig $ cat f a 1 2 3 4 5 $ cat f.orig 1 2 3 4 5 $ rm f.orig $ hg update -C . 2 files updated, 0 files merged, 0 files removed, 0 files unresolved Check editing files newly added by a revert 1) Create a dummy editor changing 1 to 42 $ cat > $TESTTMP/editor.sh << '__EOF__' > cat "$1" | sed "s/1/42/g" > tt > mv tt "$1" > __EOF__ 2) Add k $ printf "1\n" > k $ hg add k $ hg commit -m "add k" 3) Use interactive revert with editing (replacing +1 with +42): $ printf "0\n2\n" > k $ HGEDITOR="\"sh\" \"${TESTTMP}/editor.sh\"" hg revert -i <<EOF > y > e > EOF diff --git a/k b/k 1 hunks, 2 lines changed examine changes to 'k'? [Ynesfdaq?] y @@ -1,1 +1,2 @@ -1 +0 +2 discard this change to 'k'? [Ynesfdaq?] e reverting k $ cat k 42 $ hg update -C . 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg purge $ touch newfile $ hg add newfile $ hg status A newfile $ hg revert -i <<EOF > n > EOF forget added file newfile (Yn)? n $ hg status A newfile $ hg revert -i <<EOF > y > EOF forget added file newfile (Yn)? y forgetting newfile $ hg status ? newfile When a line without EOL is selected during "revert -i" (issue5651) $ hg init $TESTTMP/revert-i-eol $ cd $TESTTMP/revert-i-eol $ echo 0 > a $ hg ci -qAm 0 $ printf 1 >> a $ hg ci -qAm 1 $ cat a 0 1 (no-eol) $ hg revert -ir'.^' <<EOF > y > y > EOF diff --git a/a b/a 1 hunks, 1 lines changed examine changes to 'a'? [Ynesfdaq?] y @@ -1,2 +1,1 @@ 0 -1 \ No newline at end of file apply this change to 'a'? [Ynesfdaq?] y reverting a $ cat a 0 When specified pattern does not exist, we should exit early (issue5789). $ hg files a $ hg rev b b: no such file in rev b40d1912accf $ hg rev -i b b: no such file in rev b40d1912accf $ cd ..