view tests/test-stream-bundle-v2.t @ 40923:3ed77780f4a6

wireprotov2: send linknodes to emitfilerevisions()

Previously, linknodes were calculated within emitfilerevisions() by
using filectx.introrev(), which would always use the linkrev/linknode
as recorded by storage. This is wrong for cases where the receiver
doesn't have the changeset the linknode refers to.

This commit changes the logic for linknode emission so the mapping
of filenode to linknode is computed by the caller and passed into
emitfilerevisions().

As part of the change, linknodes for "filesdata" in the
haveparents=False case are now correct: the existing code performed a
manifest walk and it was trivial to plug in the correct linknode.

However, behavior for the haveparents=True case is still wrong
because it relies on filtering linkrevs against the outgoing set in
order to determine what to send. This will be fixed in a subsequent
commit.

The change test test-wireproto-exchangev2-shallow.t is a bit wonky.
The test repo has 6 revisions. The changed test is performing a shallow
clone with depth=1. So, only file data for revision 5 is present
locally. So, the new behavior of associating the linknode with
revision 5 for every file revision seems correct. Of course, when
backfilling old revisions, we'll want to update the linknode. But
this problem requires wire protocol support and we'll cross that
bridge later.

Differential Revision: https://phab.mercurial-scm.org/D5405

#require no-reposimplestore

Test creating a consuming stream bundle v2

  $ getmainid() {
  >    hg -R main log --template '{node}\n' --rev "$1"
  > }

  $ cp $HGRCPATH $TESTTMP/hgrc.orig

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > evolution.createmarkers=True
  > evolution.exchange=True
  > bundle2-output-capture=True
  > [ui]
  > ssh="$PYTHON" "$TESTDIR/dummyssh"
  > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline}
  > [web]
  > push_ssl = false
  > allow_push = *
  > [phases]
  > publish=False
  > [extensions]
  > drawdag=$TESTDIR/drawdag.py
  > clonebundles=
  > EOF

The extension requires a repo (currently unused)

  $ hg init main
  $ cd main

  $ hg debugdrawdag <<'EOF'
  > E
  > |
  > D
  > |
  > C
  > |
  > B
  > |
  > A
  > EOF

  $ hg bundle -a --type="none-v2;stream=v2" bundle.hg
  $ hg debugbundle bundle.hg
  Stream params: {}
  stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True)
  $ hg debugbundle --spec bundle.hg
  none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore

Test that we can apply the bundle as a stream clone bundle

  $ cat > .hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/bundle.hg BUNDLESPEC=`hg debugbundle --spec bundle.hg`
  > EOF

  $ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ "$PYTHON" $TESTDIR/dumbhttp.py -p $HGPORT1 --pid http.pid
  $ cat http.pid >> $DAEMON_PIDS

  $ cd ..
  $ hg clone http://localhost:$HGPORT streamv2-clone-implicit --debug
  using http://localhost:$HGPORT/
  sending capabilities command
  sending clonebundles command
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "stream2" (params: 3 mandatory) supported
  applying stream bundle
  11 files to transfer, 1.65 KB of data
  starting 4 threads for background file closing (?)
  starting 4 threads for background file closing (?)
  adding [s] data/A.i (66 bytes)
  adding [s] data/B.i (66 bytes)
  adding [s] data/C.i (66 bytes)
  adding [s] data/D.i (66 bytes)
  adding [s] data/E.i (66 bytes)
  adding [s] 00manifest.i (584 bytes)
  adding [s] 00changelog.i (595 bytes)
  adding [s] phaseroots (43 bytes)
  adding [c] branch2-served (94 bytes)
  adding [c] rbc-names-v1 (7 bytes)
  adding [c] rbc-revs-v1 (40 bytes)
  transferred 1.65 KB in \d\.\d seconds \(.*/sec\) (re)
  bundle2-input-part: total payload size 1840
  bundle2-input-bundle: 0 parts total
  updating the branch cache
  finished applying clone bundle
  query 1; heads
  sending batch command
  searching for changes
  all remote heads known locally
  no changes found
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "phase-heads" supported
  bundle2-input-part: total payload size 24
  bundle2-input-bundle: 1 parts total
  checking for updated bookmarks
  updating to branch default
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: 9bc730a19041
   A: remote created -> g
  getting A
   B: remote created -> g
  getting B
   C: remote created -> g
  getting C
   D: remote created -> g
  getting D
   E: remote created -> g
  getting E
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)

  $ hg clone --stream http://localhost:$HGPORT streamv2-clone-explicit --debug
  using http://localhost:$HGPORT/
  sending capabilities command
  sending clonebundles command
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "stream2" (params: 3 mandatory) supported
  applying stream bundle
  11 files to transfer, 1.65 KB of data
  starting 4 threads for background file closing (?)
  starting 4 threads for background file closing (?)
  adding [s] data/A.i (66 bytes)
  adding [s] data/B.i (66 bytes)
  adding [s] data/C.i (66 bytes)
  adding [s] data/D.i (66 bytes)
  adding [s] data/E.i (66 bytes)
  adding [s] 00manifest.i (584 bytes)
  adding [s] 00changelog.i (595 bytes)
  adding [s] phaseroots (43 bytes)
  adding [c] branch2-served (94 bytes)
  adding [c] rbc-names-v1 (7 bytes)
  adding [c] rbc-revs-v1 (40 bytes)
  transferred 1.65 KB in *.* seconds (*/sec) (glob)
  bundle2-input-part: total payload size 1840
  bundle2-input-bundle: 0 parts total
  updating the branch cache
  finished applying clone bundle
  query 1; heads
  sending batch command
  searching for changes
  all remote heads known locally
  no changes found
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "phase-heads" supported
  bundle2-input-part: total payload size 24
  bundle2-input-bundle: 1 parts total
  checking for updated bookmarks
  updating to branch default
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: 9bc730a19041
   A: remote created -> g
  getting A
   B: remote created -> g
  getting B
   C: remote created -> g
  getting C
   D: remote created -> g
  getting D
   E: remote created -> g
  getting E
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)