view mercurial/httppeer.py @ 37051:40206e227412

wireproto: define and implement protocol for issuing requests

The existing HTTP and SSH wire protocols suffer from a host of flaws
and shortcomings. I've been wanting to rewrite the protocol for a while
now. Supporting partial clone - which will require new wire protocol
commands and capabilities - and other advanced server functionality
will be much easier if we start from a clean slate and don't have
to be constrained by limitations of the existing wire protocol.

This commit starts to introduce a new data exchange format for
use over the wire protocol.

The new protocol is built on top of "frames," which are atomic
units of metadata + data. Frames will make it easier to implement
proxies and other mechanisms that want to inspect data without
having to maintain state. The existing frame metadata is very
minimal and it will evolve heavily. (We will eventually support
things like concurrent requests, out-of-order responses,
compression, side-channels for status updates, etc. Some of
these will require additions to the frame header.)

Another benefit of frames is that all reads are of a fixed size.
A reader works by consuming a frame header, extracting the payload
length, then reading that many bytes. No lookahead, buffering, or
memory reallocations are needed.

The new protocol attempts to be transport agnostic. I want all that's
required to use the new protocol to be a pair of unidirectional,
half-duplex pipes. (Yes, we will eventually make use of full-duplex
pipes, but that's for another commit.) Notably, when the SSH
transport switches to this new protocol, stderr will be unused.
This is by design: the lack of stderr on HTTP harms protocol
behavior there. By shoehorning everything into a pair of pipes,
we can have more consistent behavior across transports.

We currently only define the client side parts of the new protocol,
specifically the bits for requesting that a command run. This keeps
the new code and feature small and somewhat easy to review.

We add support to `hg debugwireproto` for writing frames into
HTTP request bodies. Our tests that issue commands to the new
HTTP endpoint have been updated to transmit frames. The server
bits haven't been touched to consume the frames yet. This will
occur in the next commit...

Astute readers may notice that the command name is transmitted in
both the HTTP request URL and the command request frame. This is
partially a kludge from me initially implementing the frame-based
protocol for SSH first. But it is also a feature: I intend to
eventually support issuing multiple commands per HTTP request. This
will allow us to replace the abomination that is the "batch" wire
protocol command with a protocol-level mechanism for performing
multi-dispatch. Because I want the frame-based protocol to be
as similar as possible across transports, I'd rather we (redundantly)
include the command name in the frame than differ behavior between
transports that have out-of-band routing information (like HTTP)
readily available.

Differential Revision: https://phab.mercurial-scm.org/D2851

# httppeer.py - HTTP repository proxy classes for mercurial
#
# Copyright 2005, 2006 Matt Mackall <[e-mail]>
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import errno
import io
import os
import socket
import struct
import tempfile

from .i18n import _
from . import (
    bundle2,
    error,
    httpconnection,
    pycompat,
    statichttprepo,
    url as urlmod,
    util,
    wireproto,
)

httplib = util.httplib
urlerr = util.urlerr
urlreq = util.urlreq

def encodevalueinheaders(value, header, limit):
    """Encode a string value into multiple HTTP headers.

    ``value`` will be encoded into 1 or more HTTP headers with the names
    ``header-<N>`` where ``<N>`` is an integer starting at 1. Each header
    name + value will be at most ``limit`` bytes long.

    Returns an iterable of 2-tuples consisting of header names and
    values as native strings.
    """
    # HTTP Headers are ASCII. Python 3 requires them to be unicodes,
    # not bytes. This function always takes bytes in as arguments.
    fmt = pycompat.strurl(header) + r'-%s'
    # Note: it is *NOT* a bug that the last bit here is a bytestring
    # and not a unicode: we're just getting the encoded length anyway,
    # and using an r-string to make it portable between Python 2 and 3
    # doesn't work because then the \r is a literal backslash-r
    # instead of a carriage return.
    valuelen = limit - len(fmt % r'000') - len(': \r\n')
    result = []

    n = 0
    for i in xrange(0, len(value), valuelen):
        n += 1
        result.append((fmt % str(n), pycompat.strurl(value[i:i + valuelen])))

    return result

def _wraphttpresponse(resp):
    """Wrap an HTTPResponse with common error handlers.

    This ensures that any I/O from any consumer raises the appropriate
    error and messaging.
    """
    origread = resp.read

    class readerproxy(resp.__class__):
        def read(self, size=None):
            try:
                return origread(size)
            except httplib.IncompleteRead as e:
                # e.expected is an integer if length known or None otherwise.
                if e.expected:
                    msg = _('HTTP request error (incomplete response; '
                            'expected %d bytes got %d)') % (e.expected,
                                                           len(e.partial))
                else:
                    msg = _('HTTP request error (incomplete response)')

                raise error.PeerTransportError(
                    msg,
                    hint=_('this may be an intermittent network failure; '
                           'if the error persists, consider contacting the '
                           'network or server operator'))
            except httplib.HTTPException as e:
                raise error.PeerTransportError(
                    _('HTTP request error (%s)') % e,
                    hint=_('this may be an intermittent network failure; '
                           'if the error persists, consider contacting the '
                           'network or server operator'))

    resp.__class__ = readerproxy

class _multifile(object):
    def __init__(self, *fileobjs):
        for f in fileobjs:
            if not util.safehasattr(f, 'length'):
                raise ValueError(
                    '_multifile only supports file objects that '
                    'have a length but this one does not:', type(f), f)
        self._fileobjs = fileobjs
        self._index = 0

    @property
    def length(self):
        return sum(f.length for f in self._fileobjs)

    def read(self, amt=None):
        if amt <= 0:
            return ''.join(f.read() for f in self._fileobjs)
        parts = []
        while amt and self._index < len(self._fileobjs):
            parts.append(self._fileobjs[self._index].read(amt))
            got = len(parts[-1])
            if got < amt:
                self._index += 1
            amt -= got
        return ''.join(parts)

    def seek(self, offset, whence=os.SEEK_SET):
        if whence != os.SEEK_SET:
            raise NotImplementedError(
                '_multifile does not support anything other'
                ' than os.SEEK_SET for whence on seek()')
        if offset != 0:
            raise NotImplementedError(
                '_multifile only supports seeking to start, but that '
                'could be fixed if you need it')
        for f in self._fileobjs:
            f.seek(0)
        self._index = 0

class httppeer(wireproto.wirepeer):
    def __init__(self, ui, path, url, opener):
        self._ui = ui
        self._path = path
        self._url = url
        self._caps = None
        self._urlopener = opener
        # This is an its own attribute to facilitate extensions overriding
        # the default type.
        self._requestbuilder = urlreq.request

    def __del__(self):
        for h in self._urlopener.handlers:
            h.close()
            getattr(h, "close_all", lambda: None)()

    def _openurl(self, req):
        if (self._ui.debugflag
            and self._ui.configbool('devel', 'debug.peer-request')):
            dbg = self._ui.debug
            line = 'devel-peer-request: %s\n'
            dbg(line % '%s %s' % (req.get_method(), req.get_full_url()))
            hgargssize = None

            for header, value in sorted(req.header_items()):
                if header.startswith('X-hgarg-'):
                    if hgargssize is None:
                        hgargssize = 0
                    hgargssize += len(value)
                else:
                    dbg(line % '  %s %s' % (header, value))

            if hgargssize is not None:
                dbg(line % '  %d bytes of commands arguments in headers'
                    % hgargssize)

            if req.has_data():
                data = req.get_data()
                length = getattr(data, 'length', None)
                if length is None:
                    length = len(data)
                dbg(line % '  %d bytes of data' % length)

            start = util.timer()

        ret = self._urlopener.open(req)
        if self._ui.configbool('devel', 'debug.peer-request'):
            dbg(line % '  finished in %.4f seconds (%s)'
                % (util.timer() - start, ret.code))
        return ret

    # Begin of _basepeer interface.

    @util.propertycache
    def ui(self):
        return self._ui

    def url(self):
        return self._path

    def local(self):
        return None

    def peer(self):
        return self

    def canpush(self):
        return True

    def close(self):
        pass

    # End of _basepeer interface.

    # Begin of _basewirepeer interface.

    def capabilities(self):
        # self._fetchcaps() should have been called as part of peer
        # handshake. So self._caps should always be set.
        assert self._caps is not None
        return self._caps

    # End of _basewirepeer interface.

    # look up capabilities only when needed

    def _fetchcaps(self):
        self._caps = set(self._call('capabilities').split())

    def _callstream(self, cmd, _compressible=False, **args):
        args = pycompat.byteskwargs(args)
        if cmd == 'pushkey':
            args['data'] = ''
        data = args.pop('data', None)
        headers = args.pop('headers', {})

        self.ui.debug("sending %s command\n" % cmd)
        q = [('cmd', cmd)]
        headersize = 0
        varyheaders = []
        # Important: don't use self.capable() here or else you end up
        # with infinite recursion when trying to look up capabilities
        # for the first time.
        postargsok = self._caps is not None and 'httppostargs' in self._caps

        # Send arguments via POST.
        if postargsok and args:
            strargs = urlreq.urlencode(sorted(args.items()))
            if not data:
                data = strargs
            else:
                if isinstance(data, bytes):
                    i = io.BytesIO(data)
                    i.length = len(data)
                    data = i
                argsio = io.BytesIO(strargs)
                argsio.length = len(strargs)
                data = _multifile(argsio, data)
            headers[r'X-HgArgs-Post'] = len(strargs)
        elif args:
            # Calling self.capable() can infinite loop if we are calling
            # "capabilities". But that command should never accept wire
            # protocol arguments. So this should never happen.
            assert cmd != 'capabilities'
            httpheader = self.capable('httpheader')
            if httpheader:
                headersize = int(httpheader.split(',', 1)[0])

            # Send arguments via HTTP headers.
            if headersize > 0:
                # The headers can typically carry more data than the URL.
                encargs = urlreq.urlencode(sorted(args.items()))
                for header, value in encodevalueinheaders(encargs, 'X-HgArg',
                                                          headersize):
                    headers[header] = value
                    varyheaders.append(header)
            # Send arguments via query string (Mercurial <1.9).
            else:
                q += sorted(args.items())

        qs = '?%s' % urlreq.urlencode(q)
        cu = "%s%s" % (self._url, qs)
        size = 0
        if util.safehasattr(data, 'length'):
            size = data.length
        elif data is not None:
            size = len(data)
        if data is not None and r'Content-Type' not in headers:
            headers[r'Content-Type'] = r'application/mercurial-0.1'

        # Tell the server we accept application/mercurial-0.2 and multiple
        # compression formats if the server is capable of emitting those
        # payloads.
        protoparams = []

        mediatypes = set()
        if self._caps is not None:
            mt = self.capable('httpmediatype')
            if mt:
                protoparams.append('0.1')
                mediatypes = set(mt.split(','))

        if '0.2tx' in mediatypes:
            protoparams.append('0.2')

        if '0.2tx' in mediatypes and self.capable('compression'):
            # We /could/ compare supported compression formats and prune
            # non-mutually supported or error if nothing is mutually supported.
            # For now, send the full list to the server and have it error.
            comps = [e.wireprotosupport().name for e in
                     util.compengines.supportedwireengines(util.CLIENTROLE)]
            protoparams.append('comp=%s' % ','.join(comps))

        if protoparams:
            protoheaders = encodevalueinheaders(' '.join(protoparams),
                                                'X-HgProto',
                                                headersize or 1024)
            for header, value in protoheaders:
                headers[header] = value
                varyheaders.append(header)

        if varyheaders:
            headers[r'Vary'] = r','.join(varyheaders)

        req = self._requestbuilder(pycompat.strurl(cu), data, headers)

        if data is not None:
            self.ui.debug("sending %d bytes\n" % size)
            req.add_unredirected_header(r'Content-Length', r'%d' % size)
        try:
            resp = self._openurl(req)
        except urlerr.httperror as inst:
            if inst.code == 401:
                raise error.Abort(_('authorization failed'))
            raise
        except httplib.HTTPException as inst:
            self.ui.debug('http error while sending %s command\n' % cmd)
            self.ui.traceback()
            raise IOError(None, inst)

        # Insert error handlers for common I/O failures.
        _wraphttpresponse(resp)

        # record the url we got redirected to
        resp_url = pycompat.bytesurl(resp.geturl())
        if resp_url.endswith(qs):
            resp_url = resp_url[:-len(qs)]
        if self._url.rstrip('/') != resp_url.rstrip('/'):
            if not self.ui.quiet:
                self.ui.warn(_('real URL is %s\n') % resp_url)
        self._url = resp_url
        try:
            proto = pycompat.bytesurl(resp.getheader(r'content-type', r''))
        except AttributeError:
            proto = pycompat.bytesurl(resp.headers.get(r'content-type', r''))

        safeurl = util.hidepassword(self._url)
        if proto.startswith('application/hg-error'):
            raise error.OutOfBandError(resp.read())
        # accept old "text/plain" and "application/hg-changegroup" for now
        if not (proto.startswith('application/mercurial-') or
                (proto.startswith('text/plain')
                 and not resp.headers.get('content-length')) or
                proto.startswith('application/hg-changegroup')):
            self.ui.debug("requested URL: '%s'\n" % util.hidepassword(cu))
            raise error.RepoError(
                _("'%s' does not appear to be an hg repository:\n"
                  "---%%<--- (%s)\n%s\n---%%<---\n")
                % (safeurl, proto or 'no content-type', resp.read(1024)))

        if proto.startswith('application/mercurial-'):
            try:
                version = proto.split('-', 1)[1]
                version_info = tuple([int(n) for n in version.split('.')])
            except ValueError:
                raise error.RepoError(_("'%s' sent a broken Content-Type "
                                        "header (%s)") % (safeurl, proto))

            # TODO consider switching to a decompression reader that uses
            # generators.
            if version_info == (0, 1):
                if _compressible:
                    return util.compengines['zlib'].decompressorreader(resp)
                return resp
            elif version_info == (0, 2):
                # application/mercurial-0.2 always identifies the compression
                # engine in the payload header.
                elen = struct.unpack('B', resp.read(1))[0]
                ename = resp.read(elen)
                engine = util.compengines.forwiretype(ename)
                return engine.decompressorreader(resp)
            else:
                raise error.RepoError(_("'%s' uses newer protocol %s") %
                                      (safeurl, version))

        if _compressible:
            return util.compengines['zlib'].decompressorreader(resp)

        return resp

    def _call(self, cmd, **args):
        fp = self._callstream(cmd, **args)
        try:
            return fp.read()
        finally:
            # if using keepalive, allow connection to be reused
            fp.close()

    def _callpush(self, cmd, cg, **args):
        # have to stream bundle to a temp file because we do not have
        # http 1.1 chunked transfer.

        types = self.capable('unbundle')
        try:
            types = types.split(',')
        except AttributeError:
            # servers older than d1b16a746db6 will send 'unbundle' as a
            # boolean capability. They only support headerless/uncompressed
            # bundles.
            types = [""]
        for x in types:
            if x in bundle2.bundletypes:
                type = x
                break

        tempname = bundle2.writebundle(self.ui, cg, None, type)
        fp = httpconnection.httpsendfile(self.ui, tempname, "rb")
        headers = {r'Content-Type': r'application/mercurial-0.1'}

        try:
            r = self._call(cmd, data=fp, headers=headers, **args)
            vals = r.split('\n', 1)
            if len(vals) < 2:
                raise error.ResponseError(_("unexpected response:"), r)
            return vals
        except urlerr.httperror:
            # Catch and re-raise these so we don't try and treat them
            # like generic socket errors. They lack any values in
            # .args on Python 3 which breaks our socket.error block.
            raise
        except socket.error as err:
            if err.args[0] in (errno.ECONNRESET, errno.EPIPE):
                raise error.Abort(_('push failed: %s') % err.args[1])
            raise error.Abort(err.args[1])
        finally:
            fp.close()
            os.unlink(tempname)

    def _calltwowaystream(self, cmd, fp, **args):
        fh = None
        fp_ = None
        filename = None
        try:
            # dump bundle to disk
            fd, filename = tempfile.mkstemp(prefix="hg-bundle-", suffix=".hg")
            fh = os.fdopen(fd, r"wb")
            d = fp.read(4096)
            while d:
                fh.write(d)
                d = fp.read(4096)
            fh.close()
            # start http push
            fp_ = httpconnection.httpsendfile(self.ui, filename, "rb")
            headers = {r'Content-Type': r'application/mercurial-0.1'}
            return self._callstream(cmd, data=fp_, headers=headers, **args)
        finally:
            if fp_ is not None:
                fp_.close()
            if fh is not None:
                fh.close()
                os.unlink(filename)

    def _callcompressable(self, cmd, **args):
        return self._callstream(cmd, _compressible=True, **args)

    def _abort(self, exception):
        raise exception

def makepeer(ui, path):
    u = util.url(path)
    if u.query or u.fragment:
        raise error.Abort(_('unsupported URL component: "%s"') %
                          (u.query or u.fragment))

    # urllib cannot handle URLs with embedded user or passwd.
    url, authinfo = u.authinfo()
    ui.debug('using %s\n' % url)

    opener = urlmod.opener(ui, authinfo)

    return httppeer(ui, path, url, opener)

def instance(ui, path, create):
    if create:
        raise error.Abort(_('cannot create new http repository'))
    try:
        if path.startswith('https:') and not urlmod.has_https:
            raise error.Abort(_('Python support for SSL and HTTPS '
                                'is not installed'))

        inst = makepeer(ui, path)
        inst._fetchcaps()

        return inst
    except error.RepoError as httpexception:
        try:
            r = statichttprepo.instance(ui, "static-" + path, create)
            ui.note(_('(falling back to static-http)\n'))
            return r
        except error.RepoError:
            raise httpexception # use the original http RepoError instead