windows: degrade to py2 behavior when reading a non-symlink as a symlink
While waiting for the push to hg-committed in WSL to complete, I ran a
`phabimport` from Windows and got this traceback:
$ hg phabimport 11313
** Unknown exception encountered with possibly-broken third-party extension "mercurial_keyring" (version N/A)
** which supports versions unknown of Mercurial.
** Please disable "mercurial_keyring" and try your action again.
** If that fixes the bug please report it to https://foss.heptapod.net/mercurial/mercurial_keyring/issues
** Python 3.9.5 (default, May 6 2021, 17:29:31) [MSC v.1928 64 bit (AMD64)]
** Mercurial Distributed SCM (version 5.9rc1+hg32.
0e2f5733563d)
** Extensions loaded: absorb, blackbox, evolve 10.3.3, extdiff, fastannotate, fix, mercurial_keyring, mq, phabblocker
20210126, phabricator, rebase, show, strip, topic 0.22.3
Traceback (most recent call last):
File "mercurial.lock", line 279, in _trylock
File "mercurial.vfs", line 202, in makelock
File "mercurial.util", line 2147, in makelock
FileExistsError: [WinError 183] Cannot create a file when that file already exists: b'hp-omen:78348' -> b'C:\\Users\\Matt\\hg/.hg/store/lock'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 24, in <module>
File "mercurial.dispatch", line 144, in run
File "mercurial.dispatch", line 250, in dispatch
File "mercurial.dispatch", line 294, in _rundispatch
File "mercurial.dispatch", line 470, in _runcatch
File "mercurial.dispatch", line 480, in _callcatch
File "mercurial.scmutil", line 153, in callcatch
File "mercurial.dispatch", line 460, in _runcatchfunc
File "mercurial.dispatch", line 1273, in _dispatch
File "mercurial.dispatch", line 918, in runcommand
File "mercurial.dispatch", line 1285, in _runcommand
File "mercurial.dispatch", line 1271, in <lambda>
File "mercurial.util", line 1886, in check
File "mercurial.util", line 1886, in check
File "hgext.mq", line 4239, in mqcommand
File "mercurial.util", line 1886, in check
File "mercurial.util", line 1886, in check
File "hgext.phabricator", line 314, in inner
File "hgext.phabricator", line 2222, in phabimport
File "hgext.phabricator", line 2123, in readpatch
File "hgext.phabricator", line 2199, in _write
File "mercurial.localrepo", line 2956, in lock
File "mercurial.localrepo", line 2918, in _lock
File "mercurial.lock", line 152, in trylock
File "mercurial.lock", line 283, in _trylock
File "mercurial.lock", line 314, in _readlock
File "mercurial.vfs", line 221, in readlock
File "mercurial.util", line 2163, in readlock
File "mercurial.windows", line 619, in readlink
ValueError: not a symbolic link
Both exceptions look accurate (the file exists, and the Windows side can't read
WSL side symlinks). I didn't try to reproduce this entirely within the Windows
side, but we can do better than a cryptic stacktrace. With this change, the
same scenario results in this abort:
abort: C:\Users\Matt\hg/.hg/store/lock: The file cannot be accessed by the system
When both the `push` and `phabimport` are done on the Windows side, it prints a
message about waiting for the lock, and successfully applies the patch after the
push completes.
I'm not sure if there's enough info to be able to convert the abort into the
wait scenario. As it stands now, we don't support symlinks on Windows, which
requires either a UAC Administrator level process or an opt-in in developer
mode, and there are several places where the new symlink on Windows support in
py3 was explicitly disabled in order to get tests to pass quicker.
Differential Revision: https://phab.mercurial-scm.org/D11333
#testcases filelog compatibility changeset sidedata
$ cat >> $HGRCPATH << EOF
> [extensions]
> rebase=
> [alias]
> l = log -G -T '{rev} {desc}\n{files}\n'
> EOF
#if compatibility
$ cat >> $HGRCPATH << EOF
> [experimental]
> copies.read-from = compatibility
> EOF
#endif
#if changeset
$ cat >> $HGRCPATH << EOF
> [experimental]
> copies.read-from = changeset-only
> copies.write-to = changeset-only
> EOF
#endif
#if sidedata
$ cat >> $HGRCPATH << EOF
> [format]
> exp-use-copies-side-data-changeset = yes
> EOF
#endif
$ REPONUM=0
$ newrepo() {
> cd $TESTTMP
> REPONUM=`expr $REPONUM + 1`
> hg init repo-$REPONUM
> cd repo-$REPONUM
> }
Copy a file, then delete destination, then copy again. This does not create a new filelog entry.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg cp x y
$ hg ci -qm 'copy x to y'
$ hg rm y
$ hg ci -m 'remove y'
$ hg cp -f x y
$ hg ci -m 'copy x onto y (again)'
$ hg l
@ 4 copy x onto y (again)
| y
o 3 remove y
| y
o 2 copy x to y
| y
| o 1 modify x
|/ x
o 0 add x
x
$ hg debugp1copies -r 4
x -> y
$ hg debugpathcopies 0 4
x -> y
$ hg graft -r 1
grafting 1:* "modify x" (glob)
merging y and x to y
$ hg co -qC 1
$ hg graft -r 4
grafting 4:* "copy x onto y (again)" (glob)
merging x and y to y
Copy x to y, then remove y, then add back y. With copy metadata in the
changeset, this could easily end up reporting y as copied from x (if we don't
unmark it as a copy when it's removed). Despite x and y not being related, we
want grafts to propagate across the rename.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg rm y
$ hg ci -qm 'remove y'
$ echo x > y
$ hg ci -Aqm 'add back y'
$ hg l
@ 4 add back y
| y
o 3 remove y
| y
o 2 rename x to y
| x y
| o 1 modify x
|/ x
o 0 add x
x
$ hg debugpathcopies 0 4
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 1
grafting 1:* "modify x" (glob)
file 'x' was deleted in local [local] but was modified in other [graft].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Add x, remove it, then add it back, then rename x to y. Similar to the case
above, but here the break in history is before the rename.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg rm x
$ hg ci -qm 'remove x'
$ echo x > x
$ hg ci -Aqm 'add x again'
$ hg mv x y
$ hg ci -m 'rename x to y'
$ hg l
@ 4 rename x to y
| x y
o 3 add x again
| x
o 2 remove x
| x
| o 1 modify x
|/ x
o 0 add x
x
$ hg debugpathcopies 0 4
x -> y
$ hg graft -r 1
grafting 1:* "modify x" (glob)
merging y and x to y
$ hg co -qC 1
$ hg graft -r 4
grafting 4:* "rename x to y" (glob)
merging x and y to y
Add x, modify it, remove it, then add it back, then rename x to y. Similar to
the case above, but here the re-added file's nodeid is different from before
the break.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ echo x3 > x
$ hg ci -qm 'modify x again'
$ hg co -q 1
$ hg rm x
$ hg ci -qm 'remove x'
# Same content to avoid conflicts
$ hg revert -r 1 x
$ hg ci -Aqm 'add x again'
$ hg mv x y
$ hg ci -m 'rename x to y'
$ hg l
@ 5 rename x to y
| x y
o 4 add x again
| x
o 3 remove x
| x
| o 2 modify x again
|/ x
o 1 modify x
| x
o 0 add x
x
$ hg debugpathcopies 0 5
x -> y (no-filelog !)
#if no-filelog
$ hg graft -r 2
grafting 2:* "modify x again" (glob)
merging y and x to y
#else
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 2
grafting 2:* "modify x again" (glob)
file 'x' was deleted in local [local] but was modified in other [graft].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
#endif
$ hg co -qC 2
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 5
grafting 5:* "rename x to y"* (glob)
file 'x' was deleted in other [graft] but was modified in local [local].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Add x, remove it, then add it back, rename x to y from the first commit.
Similar to the case above, but here the break in history is parallel to the
rename.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg rm x
$ hg ci -qm 'remove x'
$ echo x > x
$ hg ci -Aqm 'add x again'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 4 rename x to y
| x y
| o 3 modify x
| | x
| o 2 add x again
| | x
| o 1 remove x
|/ x
o 0 add x
x
$ hg debugpathcopies 2 4
x -> y
$ hg graft -r 3
grafting 3:* "modify x" (glob)
merging y and x to y
$ hg co -qC 3
$ hg graft -r 4
grafting 4:* "rename x to y" (glob)
merging x and y to y
Add x, remove it, then add it back, rename x to y from the first commit.
Similar to the case above, but here the re-added file's nodeid is different
from the base.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg rm x
$ hg ci -qm 'remove x'
$ echo x2 > x
$ hg ci -Aqm 'add x again with different content'
$ hg co -q 0
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 3 rename x to y
| x y
| o 2 add x again with different content
| | x
| o 1 remove x
|/ x
o 0 add x
x
$ hg debugpathcopies 2 3
x -> y
BROKEN: This should merge the changes from x into y
$ hg graft -r 2
grafting 2:* "add x again with different content" (glob)
$ hg co -qC 2
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 3
grafting 3:* "rename x to y" (glob)
file 'x' was deleted in other [graft] but was modified in local [local].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Add x on two branches, then rename x to y on one side. Similar to the case
above, but here the break in history is via the base commit.
$ newrepo
$ echo a > a
$ hg ci -Aqm 'base'
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ echo x > x
$ hg ci -Aqm 'add x again'
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 4 rename x to y
| x y
o 3 add x again
| x
| o 2 modify x
| | x
| o 1 add x
|/ x
o 0 base
a
$ hg debugpathcopies 1 4
x -> y
$ hg graft -r 2
grafting 2:* "modify x" (glob)
merging y and x to y
$ hg co -qC 2
$ hg graft -r 4
grafting 4:* "rename x to y"* (glob)
merging x and y to y
Add x on two branches, with same content but different history, then rename x
to y on one side. Similar to the case above, here the file's nodeid is
different between the branches.
$ newrepo
$ echo a > a
$ hg ci -Aqm 'base'
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ touch x
$ hg ci -Aqm 'add empty x'
# Same content to avoid conflicts
$ hg revert -r 1 x
$ hg ci -m 'modify x to match commit 1'
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 5 rename x to y
| x y
o 4 modify x to match commit 1
| x
o 3 add empty x
| x
| o 2 modify x
| | x
| o 1 add x
|/ x
o 0 base
a
$ hg debugpathcopies 1 5
x -> y (no-filelog !)
#if no-filelog
$ hg graft -r 2
grafting 2:* "modify x" (glob)
merging y and x to y
#else
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 2
grafting 2:* "modify x" (glob)
file 'x' was deleted in local [local] but was modified in other [graft].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
#endif
$ hg co -qC 2
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 5
grafting 5:* "rename x to y"* (glob)
file 'x' was deleted in other [graft] but was modified in local [local].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Copies via null revision (there shouldn't be any)
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg cp x y
$ hg ci -m 'copy x to y'
$ hg co -q null
$ echo x > x
$ hg ci -Aqm 'add x (again)'
$ hg l
@ 2 add x (again)
x
o 1 copy x to y
| y
o 0 add x
x
$ hg debugpathcopies 1 2
$ hg debugpathcopies 2 1
$ hg graft -r 1
grafting 1:* "copy x to y" (glob)
Copies involving a merge of multiple roots.
$ newrepo
$ echo a > a
$ hg ci -Aqm 'add a'
$ echo a >> a
$ hg ci -Aqm 'update a'
$ echo a >> a
$ hg ci -Aqm 'update a'
$ hg up null
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo b > a
$ hg ci -Aqm 'add a'
$ hg mv a b
$ hg ci -Aqm 'move a to b'
$ echo b >> b
$ hg ci -Aqm 'update b'
$ hg merge 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m "merge with other branch"
$ echo a >> a
$ echo a >> a
$ echo b >> b
$ hg ci -Aqm 'update a and b'
$ hg l
@ 7 update a and b
| a b
o 6 merge with other branch
|\
| o 5 update b
| | b
| o 4 move a to b
| | a b
| o 3 add a
| a
| o 2 update a
| | a
| o 1 update a
|/ a
o 0 add a
a
$ hg cat a -r 7
a
a
a
$ hg cat a -r 2
a
a
a
$ hg cat a -r 0
a
$ hg debugpathcopies 7 2
$ hg debugpathcopies 2 7
$ hg merge 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)