view tests/test-http.t @ 16634:435375cc0ca0 stable

mq: backup local changes in qpush --force

qpush help says the following about --force:
1- When -f/--force is applied, all local changes in patched files will
   be lost.
2- Apply on top of local changes

In practice, qpush --force will attempt to apply the patch on top of
local changes, and on success will merge them in the pushed patch. On
failure, patched files will contain a mix of local changes (where the
patch could not apply) and a mix of patch changes (were it applied). So,
local changes are less lost than entangled with a mass of other changes.

This patch makes qpush --force backup all locally modified files touched
by the next patch being applied. When multiple patches are being pushed,
this logic is repeated for each patch. Note that modified but
successfully patched files are preserved as well.

  $ "$TESTDIR/hghave" serve || exit 80

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
  $ echo foo>foo.d/foo
  $ echo bar>foo.d/bAr.hg.d/BaR
  $ echo bar>foo.d/baR.d.hg/bAR
  $ hg commit -A -m 1
  adding foo
  adding foo.d/bAr.hg.d/BaR
  adding foo.d/baR.d.hg/bAR
  adding foo.d/foo
  $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
  $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid

Test server address cannot be reused

  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': Address already in use
  [255]
  $ cd ..
  $ cat hg1.pid hg2.pid >> $DAEMON_PIDS

clone via stream

  $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
  streaming all changes
  6 files to transfer, 606 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions

try to clone via stream, should use pull instead

  $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

clone via pull

  $ hg clone http://localhost:$HGPORT1/ copy-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy-pull
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions
  $ cd test
  $ echo bar > bar
  $ hg commit -A -d '1 0' -m 2
  adding bar
  $ cd ..

incoming via HTTP

  $ hg clone http://localhost:$HGPORT1/ --rev 0 partial
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ touch LOCAL
  $ hg ci -qAm LOCAL
  $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
  comparing with http://localhost:$HGPORT1/
  searching for changes
  2
  $ cd ..

pull

  $ cd copy-pull
  $ echo '[hooks]' >> .hg/hgrc
  $ echo 'changegroup = python "$TESTDIR"/printenv.py changegroup' >> .hg/hgrc
  $ hg pull
  pulling from http://localhost:$HGPORT1/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/ 
  (run 'hg update' to get a working copy)
  $ cd ..

clone from invalid URL

  $ hg clone http://localhost:$HGPORT/bad
  abort: HTTP Error 404: Not Found
  [255]

test http authentication
+ use the same server to test server side streaming preference

  $ cd test
  $ cat << EOT > userpass.py
  > import base64
  > from mercurial.hgweb import common
  > def perform_authentication(hgweb, req, op):
  >     auth = req.env.get('HTTP_AUTHORIZATION')
  >     if not auth:
  >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
  >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
  >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']: 
  >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
  > def extsetup():
  >     common.permhooks.insert(0, perform_authentication)
  > EOT
  $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \
  >    --config server.preferuncompressed=True
  $ cat pid >> $DAEMON_PIDS

  $ hg id http://localhost:$HGPORT2/  
  abort: http authorization required
  [255]
  $ hg id http://user@localhost:$HGPORT2/ 
  abort: http authorization required
  [255]
  $ hg id http://user:pass@localhost:$HGPORT2/
  5fed3813f7f5
  $ echo '[auth]' >> .hg/hgrc 
  $ echo 'l.schemes=http' >> .hg/hgrc
  $ echo 'l.prefix=lo' >> .hg/hgrc
  $ echo 'l.username=user' >> .hg/hgrc
  $ echo 'l.password=pass' >> .hg/hgrc
  $ hg id http://localhost:$HGPORT2/ 
  5fed3813f7f5
  $ hg id http://localhost:$HGPORT2/  
  5fed3813f7f5
  $ hg id http://user@localhost:$HGPORT2/ 
  5fed3813f7f5
  $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
  streaming all changes
  7 files to transfer, 916 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  updating to branch default
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg id http://user2@localhost:$HGPORT2/ 
  abort: http authorization required
  [255]
  $ hg id http://user:pass2@localhost:$HGPORT2/
  abort: HTTP Error 403: no
  [255]

  $ cd ..

clone of serve with repo in root and unserved subrepo (issue2970)

  $ hg --cwd test init sub
  $ hg --cwd test/sub tag something
  $ echo sub = sub > test/.hgsub
  $ hg --cwd test add .hgsub
  $ hg --cwd test commit -qm 'add subrepo'
  $ hg clone http://localhost:$HGPORT noslash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]
  $ hg clone http://localhost:$HGPORT/ slash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]

check error log

  $ cat error.log