view tests/test-pager-legacy.t @ 32783:4483696dacee

profile: upgrade the "profile" context manager to a full class

So far we have been able to use a simple decorator for this. However using the
current context manager makes the scope of the profiling in dispatch
constrainted and the time frame to decide to enable profiling quite limited
(using "maybeprofile")

This is the first step toward the ability to enable the profiling from within
the profiling scope. eg::

  with maybeprofiling(ui) as profiler:
      ...
      bar.foo():
      ...
      if options['profile']:
          profiler.start()
      ...
      fooz()
      ...

My target usecase is adding support for  "--profile" to alias definitions with
effect.  These are to be used with "profiling.output=blackbox" to gather data
about operation that get slow from time to time (eg: pull being minutes instead
of seconds from time to time).

Of course, in such case, the scope of the profiling would be smaller since
profiler would be started after running extensions 'reposetup' (and other
potentially costly logic), but these are not relevant for my target usecase
(multiple second commits, multiple tens of seconds pull).

Currently adding '--profile' to a command through alias requires to re-spin a
Mercurial binary (using "!$HG" in alias), which as a significant performance
impact, especially in context where startup performance is being worked on...

An alternative approach would be to stop using the context manager in dispatch
and move back to a try/finally setup.

  $ cat >> fakepager.py <<EOF
  > import sys
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  > EOF

Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > formatted = yes
  > color = no
  > [extensions]
  > pager=
  > [pager]
  > pager = python $TESTTMP/fakepager.py
  > EOF

  $ hg init repo
  $ cd repo
  $ echo a >> a
  $ hg add a
  $ hg ci -m 'add a'
  $ for x in `python $TESTDIR/seq.py 1 10`; do
  >   echo a $x >> a
  >   hg ci -m "modify a $x"
  > done

By default diff and log are paged, but summary is not:

  $ hg diff -c 2 --pager=yes
  paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
  paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '@@ -1,2 +1,3 @@\n'
  paged! ' a\n'
  paged! ' a 1\n'
  paged! '+a 2\n'

  $ hg log --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

  $ hg summary
  parent: 10:46106edeeb38 tip
   modify a 10
  branch: default
  commit: (clean)
  update: (current)
  phases: 11 draft

We can enable the pager on summary:

  $ hg --config pager.attend-summary=yes summary
  paged! 'parent: 10:46106edeeb38 tip\n'
  paged! ' modify a 10\n'
  paged! 'branch: default\n'
  paged! 'commit: (clean)\n'
  paged! 'update: (current)\n'
  paged! 'phases: 11 draft\n'

  $ hg --config pager.attend-diff=no diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

If we completely change the attend list that's respected:
  $ hg --config pager.attend=summary diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

If 'log' is in attend, then 'history' should also be paged:
  $ hg history --limit 2 --config pager.attend=log
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Possible bug: history is explicitly ignored in pager config, but
because log is in the attend list it still gets pager treatment.

  $ hg history --limit 2 --config pager.attend=log \
  >   --config pager.ignore=history
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Possible bug: history is explicitly marked as attend-history=no, but
it doesn't fail to get paged because log is still in the attend list.

  $ hg history --limit 2 --config pager.attend-history=no
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Possible bug: disabling pager for log but enabling it for history
doesn't result in history being paged.

  $ hg history --limit 2 --config pager.attend-log=no \
  > --config pager.attend-history=yes
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  changeset:   9:6dd8ea7dd621
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 9
  
Pager should not start if stdout is not a tty.

  $ hg log -l1 -q --config ui.formatted=False
  10:46106edeeb38

Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > color = always
  > [color]
  > mode = ansi
  > EOF
  $ hg log --limit 3
  paged! '\x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 8\n'
  paged! '\n'

Pager works with shell aliases.

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > echoa = !echo a
  > EOF

  $ hg echoa
  a
  $ hg --config pager.attend-echoa=yes echoa
  paged! 'a\n'

Pager works with hg aliases including environment variables.

  $ cat >> $HGRCPATH <<'EOF'
  > [alias]
  > printa = log -T "$A\n" -r 0
  > EOF

  $ A=1 hg --config pager.attend-printa=yes printa
  paged! '1\n'
  $ A=2 hg --config pager.attend-printa=yes printa
  paged! '2\n'

Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
  $ A=2 hg --config pager.attend-printa=yes printa --pager=no
  2

Pager should not override the exit code of other commands

  $ cat >> $TESTTMP/fortytwo.py <<'EOF'
  > from mercurial import registrar, commands
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command('fortytwo', [], 'fortytwo', norepo=True)
  > def fortytwo(ui, *opts):
  >     ui.write('42\n')
  >     return 42
  > EOF

  $ cat >> $HGRCPATH <<'EOF'
  > [extensions]
  > fortytwo = $TESTTMP/fortytwo.py
  > EOF

  $ hg fortytwo --pager=on
  paged! '42\n'
  [42]