view contrib/mercurial.spec @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

%global emacs_lispdir %{_datadir}/emacs/site-lisp

%define withpython %{nil}

%if "%{?withpython}"

%global pythonver %{withpython}
%global pythonname Python-%{withpython}
%global docutilsname docutils-0.14
%global docutilsmd5 c53768d63db3873b7d452833553469de
%global pythonhg python-hg
%global hgpyprefix /opt/%{pythonhg}
# byte compilation will fail on some some Python /test/ files
%global _python_bytecompile_errors_terminate_build 0

%else

%global pythonver %(python -c 'import sys;print ".".join(map(str, sys.version_info[:2]))')

%endif

Summary: A fast, lightweight Source Control Management system
Name: mercurial
Version: snapshot
Release: 0
License: GPLv2+
Group: Development/Tools
URL: https://mercurial-scm.org/
Source0: %{name}-%{version}-%{release}.tar.gz
%if "%{?withpython}"
Source1: %{pythonname}.tgz
Source2: %{docutilsname}.tar.gz
%endif
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root

BuildRequires: make, gcc, gettext
%if "%{?withpython}"
BuildRequires: readline-devel, openssl-devel, ncurses-devel, zlib-devel, bzip2-devel
%else
BuildRequires: python >= 2.7, python-devel, python-docutils >= 0.5
Requires: python >= 2.7
%endif
# The hgk extension uses the wish tcl interpreter, but we don't enforce it
#Requires: tk

%description
Mercurial is a fast, lightweight source control management system designed
for efficient handling of very large distributed projects.

%prep

%if "%{?withpython}"
%setup -q -n mercurial-%{version}-%{release} -a1 -a2
# despite the comments in cgi.py, we do this to prevent rpmdeps from picking /usr/local/bin/python up
sed -i '1c#! /usr/bin/env python' %{pythonname}/Lib/cgi.py
%else
%setup -q -n mercurial-%{version}-%{release}
%endif

%build

%if "%{?withpython}"

PYPATH=$PWD/%{pythonname}
cd $PYPATH
./configure --prefix=%{hgpyprefix}
make all %{?_smp_mflags}
cd -

cd %{docutilsname}
LD_LIBRARY_PATH=$PYPATH $PYPATH/python setup.py build
cd -

# verify Python environment
LD_LIBRARY_PATH=$PYPATH PYTHONPATH=$PWD/%{docutilsname} $PYPATH/python -c 'import sys, zlib, bz2, ssl, curses, readline'

# set environment for make
export PATH=$PYPATH:$PATH
export LD_LIBRARY_PATH=$PYPATH
export CFLAGS="-L $PYPATH"
export PYTHONPATH=$PWD/%{docutilsname}

%endif

make all
make -C contrib/chg

%install
rm -rf $RPM_BUILD_ROOT

%if "%{?withpython}"

PYPATH=$PWD/%{pythonname}
cd $PYPATH
make install DESTDIR=$RPM_BUILD_ROOT
# these .a are not necessary and they are readonly and strip fails - kill them!
rm -f %{buildroot}%{hgpyprefix}/lib/{,python2.*/config}/libpython2.*.a
cd -

cd %{docutilsname}
LD_LIBRARY_PATH=$PYPATH $PYPATH/python setup.py install --root="$RPM_BUILD_ROOT"
cd -

PATH=$PYPATH:$PATH LD_LIBRARY_PATH=$PYPATH make install DESTDIR=$RPM_BUILD_ROOT PREFIX=%{hgpyprefix} MANDIR=%{_mandir}
mkdir -p $RPM_BUILD_ROOT%{_bindir}
( cd $RPM_BUILD_ROOT%{_bindir}/ && ln -s ../..%{hgpyprefix}/bin/hg . )
( cd $RPM_BUILD_ROOT%{_bindir}/ && ln -s ../..%{hgpyprefix}/bin/python2.? %{pythonhg} )

%else

make install DESTDIR=$RPM_BUILD_ROOT PREFIX=%{_prefix} MANDIR=%{_mandir}

%endif

install -m 755 contrib/chg/chg $RPM_BUILD_ROOT%{_bindir}/
install -m 755 contrib/hgk $RPM_BUILD_ROOT%{_bindir}/
install -m 755 contrib/hg-ssh $RPM_BUILD_ROOT%{_bindir}/

bash_completion_dir=$RPM_BUILD_ROOT%{_sysconfdir}/bash_completion.d
mkdir -p $bash_completion_dir
install -m 644 contrib/bash_completion $bash_completion_dir/mercurial.sh

zsh_completion_dir=$RPM_BUILD_ROOT%{_datadir}/zsh/site-functions
mkdir -p $zsh_completion_dir
install -m 644 contrib/zsh_completion $zsh_completion_dir/_mercurial

mkdir -p $RPM_BUILD_ROOT%{emacs_lispdir}
install -m 644 contrib/mercurial.el $RPM_BUILD_ROOT%{emacs_lispdir}/
install -m 644 contrib/mq.el $RPM_BUILD_ROOT%{emacs_lispdir}/

mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/mercurial/hgrc.d

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root,-)
%doc CONTRIBUTORS COPYING doc/README doc/hg*.txt doc/hg*.html *.cgi contrib/*.fcgi
%doc %attr(644,root,root) %{_mandir}/man?/hg*
%doc %attr(644,root,root) contrib/*.svg
%dir %{_datadir}/zsh/
%dir %{_datadir}/zsh/site-functions/
%{_datadir}/zsh/site-functions/_mercurial
%dir %{_datadir}/emacs/site-lisp/
%{_datadir}/emacs/site-lisp/mercurial.el
%{_datadir}/emacs/site-lisp/mq.el
%{_bindir}/hg
%{_bindir}/chg
%{_bindir}/hgk
%{_bindir}/hg-ssh
%dir %{_sysconfdir}/bash_completion.d/
%config(noreplace) %{_sysconfdir}/bash_completion.d/mercurial.sh
%dir %{_sysconfdir}/mercurial
%dir %{_sysconfdir}/mercurial/hgrc.d
%if "%{?withpython}"
%{_bindir}/%{pythonhg}
%{hgpyprefix}
%else
%{_libdir}/python%{pythonver}/site-packages/%{name}-*-py%{pythonver}.egg-info
%{_libdir}/python%{pythonver}/site-packages/%{name}
%{_libdir}/python%{pythonver}/site-packages/hgext
%{_libdir}/python%{pythonver}/site-packages/hgext3rd
%{_libdir}/python%{pythonver}/site-packages/hgdemandimport
%endif