view doc/check-seclevel.py @ 37295:45b39c69fae0

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

#!/usr/bin/env python
#
# checkseclevel - checking section title levels in each online help document

from __future__ import absolute_import

import optparse
import os
import sys

# import from the live mercurial repo
os.environ['HGMODULEPOLICY'] = 'py'
sys.path.insert(0, "..")
from mercurial import demandimport; demandimport.enable()
from mercurial import (
    commands,
    extensions,
    help,
    minirst,
    ui as uimod,
)

table = commands.table
helptable = help.helptable

level2mark = [b'"', b'=', b'-', b'.', b'#']
reservedmarks = [b'"']

mark2level = {}
for m, l in zip(level2mark, range(len(level2mark))):
    if m not in reservedmarks:
        mark2level[m] = l

initlevel_topic = 0
initlevel_cmd = 1
initlevel_ext = 1
initlevel_ext_cmd = 3

def showavailables(ui, initlevel):
    avail = ('    available marks and order of them in this help: %s\n') % (
        ', '.join(['%r' % (m * 4) for m in level2mark[initlevel + 1:]]))
    ui.warn(avail.encode('utf-8'))

def checkseclevel(ui, doc, name, initlevel):
    ui.note(('checking "%s"\n') % name)
    if not isinstance(doc, bytes):
        doc = doc.encode('utf-8')
    blocks, pruned = minirst.parse(doc, 0, ['verbose'])
    errorcnt = 0
    curlevel = initlevel
    for block in blocks:
        if block[b'type'] != b'section':
            continue
        mark = block[b'underline']
        title = block[b'lines'][0]
        if (mark not in mark2level) or (mark2level[mark] <= initlevel):
            ui.warn((('invalid section mark %r for "%s" of %s\n') %
                     (mark * 4, title, name)).encode('utf-8'))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        nextlevel = mark2level[mark]
        if curlevel < nextlevel and curlevel + 1 != nextlevel:
            ui.warn(('gap of section level at "%s" of %s\n') %
                    (title, name))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        ui.note(('appropriate section level for "%s %s"\n') %
                (mark * (nextlevel * 2), title))
        curlevel = nextlevel

    return errorcnt

def checkcmdtable(ui, cmdtable, namefmt, initlevel):
    errorcnt = 0
    for k, entry in cmdtable.items():
        name = k.split(b"|")[0].lstrip(b"^")
        if not entry[0].__doc__:
            ui.note(('skip checking %s: no help document\n') %
                    (namefmt % name))
            continue
        errorcnt += checkseclevel(ui, entry[0].__doc__,
                                  namefmt % name,
                                  initlevel)
    return errorcnt

def checkhghelps(ui):
    errorcnt = 0
    for names, sec, doc in helptable:
        if callable(doc):
            doc = doc(ui)
        errorcnt += checkseclevel(ui, doc,
                                  '%s help topic' % names[0],
                                  initlevel_topic)

    errorcnt += checkcmdtable(ui, table, '%s command', initlevel_cmd)

    for name in sorted(list(extensions.enabled()) +
                       list(extensions.disabled())):
        mod = extensions.load(ui, name, None)
        if not mod.__doc__:
            ui.note(('skip checking %s extension: no help document\n') % name)
            continue
        errorcnt += checkseclevel(ui, mod.__doc__,
                                  '%s extension' % name,
                                  initlevel_ext)

        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            errorcnt += checkcmdtable(ui, cmdtable,
                                      '%%s command of %s extension' % name,
                                      initlevel_ext_cmd)
    return errorcnt

def checkfile(ui, filename, initlevel):
    if filename == '-':
        filename = 'stdin'
        doc = sys.stdin.read()
    else:
        with open(filename) as fp:
            doc = fp.read()

    ui.note(('checking input from %s with initlevel %d\n') %
            (filename, initlevel))
    return checkseclevel(ui, doc, 'input from %s' % filename, initlevel)

def main():
    optparser = optparse.OptionParser("""%prog [options]

This checks all help documents of Mercurial (topics, commands,
extensions and commands of them), if no file is specified by --file
option.
""")
    optparser.add_option("-v", "--verbose",
                         help="enable additional output",
                         action="store_true")
    optparser.add_option("-d", "--debug",
                         help="debug mode",
                         action="store_true")
    optparser.add_option("-f", "--file",
                         help="filename to read in (or '-' for stdin)",
                         action="store", default="")

    optparser.add_option("-t", "--topic",
                         help="parse file as help topic",
                         action="store_const", dest="initlevel", const=0)
    optparser.add_option("-c", "--command",
                         help="parse file as help of core command",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-e", "--extension",
                         help="parse file as help of extension",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-C", "--extension-command",
                         help="parse file as help of extension command",
                         action="store_const", dest="initlevel", const=3)

    optparser.add_option("-l", "--initlevel",
                         help="set initial section level manually",
                         action="store", type="int", default=0)

    (options, args) = optparser.parse_args()

    ui = uimod.ui.load()
    ui.setconfig('ui', 'verbose', options.verbose, '--verbose')
    ui.setconfig('ui', 'debug', options.debug, '--debug')

    if options.file:
        if checkfile(ui, options.file, options.initlevel):
            sys.exit(1)
    else:
        if checkhghelps(ui):
            sys.exit(1)

if __name__ == "__main__":
    main()